WHAT DID YOU DO TO YOUR BRZ TODAY?

[sti4thewin]

Might as well post what has been done.

I just hit a 1000 miles! Plasti dipped the stockies yesterday and it turned out great





Also installed the invidia n1 catback




I ordered the sti lip kit straight from Subaru but it won't be here until the 17th of december

[08stiguy]

Installed Whiteline - Gearbox - positive shift kit bushing, PERRIN Transmission Mount Support and MTEC uprated shift lever springs

[kingnba6]

Originally Posted by aristo

Could you maybe drop a part of the name of the shop that you went to?

I'm kind of on the fence with tinting in NY because some people seem to have so much trouble with them (from the cops) and some people have straight up limo tint and seem to be just fine.. or very lucky

i ran limo tint for a solid year. i do a lot of local driving and only had one encounter with the cops and they let me go with a warning luckily. Remember if you have anything darker than 70% tint, they can give you a ticket per window. And yes, they do have a meter that can be used on the rear and hatch windows. When the cop pulled me over, I was at 3% all around. He said it would be a $150 per window so at least 4 windows. But now its winter and i removed my front window tints so now i dont have to roll down the window and freeze. I have limo all around on my Prius and yet to have a problem and its been like that for 2 years. sportier cars will always attract more attention.

[x1UP]

Finally installed the GrimmSpeed Cold Air Intake. I am so happy with it. First time doing anything to a car and yes, it took me hours, but worth it.

Thanks @GrimmSpeed for such a great product!

[B-R-Z]

OEM black shifter bezel with traction control buttons to match

Before and after:

[spdfreak]

Got the winter setup bolted up. Think I need 2 new blizzaks because the front seems to want to push real bad with the new Bilstien B14s.

[Agent 86]

Originally Posted by B-R-Z

OEM black shifter bezel with traction control buttons to match

Before and after:

I really like the dark look. Where do you get these parts, and how much?

[cliff p.]

Finished polishing and applied a sealant. She's a beauty now!

[DocWalt]

Replaced the OEM gasket I used for the header to overpipe connection. The part of the gasket that crushes when you tighten it up didn't fully crush because the JDL header flange is bigger than the OEM gasket. I didn't even think to check when I put it together.





After that, I installed my SRP throttle pedal. Heel-toe is even easier now






Also, I washed my car and snapped some quick pics.

[raven1231]

Originally Posted by Agent 86

I really like the dark look. Where do you get these parts, and how much?

I'm guessing paint and ten bucks

[B-R-Z]

Originally Posted by Agent 86

I really like the dark look. Where do you get these parts, and how much?

I bought them from a forum member who is parting out. They are parts from the base 86 in Japan which can be ordered online. The parts cost about $50 based on my searches. You can change over a lot of parts to black, see this post\thread: http://www.ft86club.com/forums/showpost.php?p=1831994&postcount=22

SU00303190 COVER, PLASTIC - Shift Surround - ~$10
SU00302486 SWITCH - Manual Transmission Switches - ~$35
SU00302487 SWITCH - Automatic Transmission Switches - ~$45

Today, in addition to the black shifter bezel install, I CF wrapped my HVAC surrounds (the other parts were done weeks ago), last thing left is steering wheel trim and air vents. I might go black with these parts instead of cf wrap, same with chrome door handles. I'm really starting to like this interior now.

[scottxnizzle]

Finally installed these bad boys!



KWV3s & H&R Trak+ Wheel Spacers (20mm & 25mm)



I love how it turned out!

[Itzed]

Originally Posted by spdfreak

Got the winter setup bolted up. Think I need 2 new blizzaks because the front seems to want to push real bad with the new Bilstien B14s.

I've been delaying putting on the winter wheels and Blizzaks as long as possible because I don't want to wear them out on dry asphalt. About how many miles are they good for?

[sti4thewin]

Originally Posted by B-R-Z

Did you remove the fog lights or attempt to install them while on the car?

What I didn't realize when I attempted this is you need to remove the fog lights and you need a heat gun.

With the fogs removed, you will see that the slight excess film wraps around the edges of the clear plastic that you can't see while the fogs are installed. The film does not rest flush on the outside edge, but when heated up you can make it rest flush.

Removing the fogs is easy but a little annoying, just turn your steering wheel, remove 3-4 clips, pull back fender plastic, remove 2 screws holding the fog in, remove bulb wire/plug and pull out. Pay attention to which side each fog light came out of and the orientation.. When I put one of mine back in it was upside down and the light was blinding, I then flipped it and it looked like the other.

I removed the 3 screw clips on the fender liner and can pull it to see the fog light, but not enough to actually get to it. I'm just wondering which tabs you had to remove to be able to pull the fender liner back ?

Trying not to break shit lol