my interior re-design - Page 20 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Jive Turkey · 10-27-2014, 04:28 PM

the only issue i see with the cayman holders...they face of the thing isn't flat but angled as you see above...

beagoodruslan · 10-30-2014, 01:39 AM

Quote:

Originally Posted by Jive Turkey

Did you make it yourself or did you buy it?

Jive Turkey · 10-30-2014, 11:16 AM

are you talking about the red boot?

http://overland-designs.com/products.../shift-boot-2/

can be done in any color/fabric/stitching

calmtigers · 11-08-2014, 03:59 AM

Time for a new steering wheel, any plans?

nos145 · 11-09-2014, 09:03 PM

TLDR

thats the worst place for start/stop button from UXUI standpoint

kids? *press all buttons*
dumb blonds? *press all buttons*
accidental? *hand presses button*

Jive Turkey · 11-10-2014, 02:07 PM

Quote:

Originally Posted by calmtigers

Time for a new steering wheel, any plans?

stock wheel re-wrapped. looking for a used wheel for cheap, if not i will just park the car for a few weeks and rip mine off.

Quote:

Originally Posted by nos145

TLDR

thats the worst place for start/stop button from UXUI standpoint

kids? *press all buttons*
dumb blonds? *press all buttons*
accidental? *hand presses button*

well maybe if you read the thread, you would have read that pressing the button while moving does nothing, thanks for your concern though.

SkAsphalt · 11-10-2014, 02:35 PM

Quote:

Originally Posted by Jive Turkey

stock wheel re-wrapped. looking for a used wheel for cheap, if not i will just park the car for a few weeks and rip mine off.

well maybe if you read the thread, you would have read that pressing the button while moving does nothing, thanks for your concern though.

Jive, love the use of Kanye.

Quote:

Originally Posted by nos145

TLDR

thats the worst place for start/stop button from UXUI standpoint

1. Why are you worried about kids in his car ? I doubt that EVER happens
2. The lady in his car is his GF, she know what the button does. Also, women are not stupid, nor are they ignorant to what an "engine start" button does. However you come across as incredibly ignorant for everything you said.

3. terrible for user experience? Sat in a SAAB or Lambo ever?

onefitz · 11-10-2014, 02:52 PM

Quote:

Originally Posted by SkAsphalt

3. terrible for user experience? Sat in a SAAB or Lambo ever?

The infamous SAAB reverse lockout..

civicdrivr · 11-10-2014, 03:06 PM

C'mon guys, in his defense, he did say TLDR.

Jive Turkey · 11-10-2014, 03:14 PM

Quote:

Originally Posted by civicdrivr

C'mon guys, in his defense, he did say TLDR.

civicdrivr · 11-11-2014, 11:56 AM

Jive Turkey · 11-11-2014, 12:04 PM

just and update on things i have coming up.

got and em wheel to wrap in alcantara.

also i decided on the cupholders that i will try to install. got a set of e90 cupholders that i plan to retrofit into the dash. one will come straight out on the right for passenger, the other will come out and bend towards the driver. hopefully they will fit and the airbag won't get too much in the way.

here is a schematic of the two cup holders:

what i'm thinking is i cut two slits in my dash trim, and i'll have that stitched around the cupholder, the face of the cupholders also comes off, so that will be wrapped to match so that when its pushed in, it matches the trim.

this will be done over winter so i don't know how long it will take.

also, an update for those of you who liked my straps. Jason (overland-designs.com) is currently working on a drop in kit for the BRZ/WRX/STI.

cheers.

-ivan

LucidMomentum · 11-11-2014, 12:21 PM

Quote:

Originally Posted by Jive Turkey

also, an update for those of you who liked my straps. Jason (overland-designs.com) is currently working on a drop in kit for the BRZ/WRX/STI.

cheers.

-ivan

Seriously? I would kill for those. That's awesome news.

toast · 11-11-2014, 12:29 PM

Quote:

Originally Posted by Jive Turkey

also i decided on the cupholders that i will try to install. got a set of e90 cupholders that i plan to retrofit into the dash. one will come straight out on the right for passenger, the other will come out and bend towards the driver. hopefully they will fit and the airbag won't get too much in the way.

here is a schematic of the two cup holders:

what i'm thinking is i cut two slits in my dash trim, and i'll have that stitched around the cupholder, the face of the cupholders also comes off, so that will be wrapped to match so that when its pushed in, it matches the trim.

-ivan

I'm very interested in how you make out. That curved one doesn't look like it would fit in the dash, but I didn't make any careful measurements.

My friend has an Audi A4 and his slide out in the same way, but the whole assembly is very compact. I think I might look into those.

11-08-2014, 03:59 AM	#270
calmtigers Senior Member Join Date: Oct 2013 Drives: 2014 Whiteout TRD FR-S 6MT Location: Fresno / DTLA Posts: 928 Thanks: 628 Thanked 376 Times in 214 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	my interior re-design Time for a new steering wheel, any plans? __________________ "I love dinosaurs so much that I’ve based my life on burning as much black melted dinosaur flesh as I can on a daily basis...even the screaming sound of prehistoric reptilians being burnt through any of the classic Japanese four cylinders gives me great joy."

11-10-2014, 03:06 PM	#275
civicdrivr Senior Member Join Date: Mar 2012 Drives: 2018 Golf R Location: Richmond, VA Posts: 2,807 Thanks: 5,386 Thanked 1,095 Times in 647 Posts Mentioned: 68 Post(s) Tagged: 7 Thread(s)	C'mon guys, in his defense, he did say TLDR. __________________ Parting out HERE

11-11-2014, 11:56 AM	#277
civicdrivr Senior Member Join Date: Mar 2012 Drives: 2018 Golf R Location: Richmond, VA Posts: 2,807 Thanks: 5,386 Thanked 1,095 Times in 647 Posts Mentioned: 68 Post(s) Tagged: 7 Thread(s)	__________________ Parting out HERE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DCW Carbon Fiber interior items! Center console Plaques / Interior panels	doggy	Interior Parts (Incl. Lighting)	143	10-11-2013 11:17 AM
LED interior conversion kits (interior), USA stock & warranty	WTF	Interior Parts (Incl. Lighting)	0	05-22-2013 10:17 PM
Video: Toyota FT-86 II Concept Design Explained by "Dezi" Nagaya (Design Manager)	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	58	04-11-2011 09:03 PM

10-27-2014, 04:28 PM	#267
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,298 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s) Tagged: 0 Thread(s)	the only issue i see with the cayman holders...they face of the thing isn't flat but angled as you see above...

10-30-2014, 11:16 AM	#269
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,298 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s) Tagged: 0 Thread(s)	are you talking about the red boot? http://overland-designs.com/products.../shift-boot-2/ can be done in any color/fabric/stitching

11-09-2014, 09:03 PM	#271
nos145 Cognite Join Date: Oct 2011 Drives: 2013 Whiteout FRS Location: Toronto, Canada Posts: 245 Thanks: 121 Thanked 57 Times in 52 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	TLDR thats the worst place for start/stop button from UXUI standpoint kids? press all buttons dumb blonds? press all buttons accidental? hand presses button

11-11-2014, 12:04 PM	#278
Jive Turkey the tuna, no crust. Join Date: Oct 2012 Drives: 2014 Hachiroku of the year Location: jersey Posts: 2,298 Thanks: 874 Thanked 1,770 Times in 761 Posts Mentioned: 78 Post(s) Tagged: 0 Thread(s)	just and update on things i have coming up. got and em wheel to wrap in alcantara. also i decided on the cupholders that i will try to install. got a set of e90 cupholders that i plan to retrofit into the dash. one will come straight out on the right for passenger, the other will come out and bend towards the driver. hopefully they will fit and the airbag won't get too much in the way. here is a schematic of the two cup holders: what i'm thinking is i cut two slits in my dash trim, and i'll have that stitched around the cupholder, the face of the cupholders also comes off, so that will be wrapped to match so that when its pushed in, it matches the trim. this will be done over winter so i don't know how long it will take. also, an update for those of you who liked my straps. Jason (overland-designs.com) is currently working on a drop in kit for the BRZ/WRX/STI. cheers. -ivan

User Name		Remember Me?
Password