PTUNING 4-1 Full T304 SS Equal Length Double-Slip Race Header (200+whp 93 pump gas) - Page 18 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Andrew025 · 10-20-2014, 07:50 PM

Yeah, I'd probably get one too depending on price.

ramiram1984 · 10-20-2014, 08:41 PM

Why don't you guys send your stock heat shield in and ptuning can make one...?
Is this even possible?

Andrew025 · 10-20-2014, 09:08 PM

Quote:

Originally Posted by ramiram1984

Why don't you guys send your stock heat shield in and ptuning can make one...?
Is this even possible?

Probably be just as much work as making one from scratch.
The shape looks way different.

BRZ? · 10-20-2014, 09:23 PM

So did anyone receive one and has a 3rd party dyno confirmed the manufacturer advertised numbers?

R2 · 10-20-2014, 09:36 PM

Quote:

Originally Posted by Mrc@ptuning

We want to make this heat shield happen but it's really going to come down to demand due to the tooling cost to make the die for the heat shield it will not be feasible for us to produce unless there's a real demand for it.

I'm interested.

D.Scrye · 10-20-2014, 10:02 PM

Quote:

Originally Posted by Mrc@ptuning

We want to make this heat shield happen but it's really going to come down to demand due to the tooling cost to make the die for the heat shield it will not be feasible for us to produce unless there's a real demand for it.

This thread keeps getting better and better

s30series · 10-21-2014, 03:34 PM

ORDER HAS BEEN SHIPPED BABY!

Once UPS picks it up I'll know my estimated delivery date. If it gets here thursday, I'm taking it Friday to performace coatings in Atlanta to get high-temp ceramic coated (along with the over pipe) and then mounting it on Saturday.

Next Friday I'll be at Topspeed motorsports hopefully to get it tuned.

Excited level? 1065165135168165168

Mrc@ptuning · 10-21-2014, 03:38 PM

Tuesday Update!

As promised. First batch of Ptuning headers are shipping out today. The next batch will go out tomorrow. If you do not get a tracking # tonight, please check your email/voicemail. Our sales department have sent out a few address verification email for some of the earlier pre-orders to make sure the shipping address is still current. If you have pre-order your header and are getting it installed by us, your header has been put aside for your scheduled installed date.

Again, thank you for your orders and your patience.

MrC

Andrew025 · 10-21-2014, 03:40 PM

Got my tracking too.

Trefoil · 10-21-2014, 05:14 PM

Quote:

Originally Posted by Mrc@ptuning

We want to make this heat shield happen but it's really going to come down to demand due to the tooling cost to make the die for the heat shield it will not be feasible for us to produce unless there's a real demand for it.

I'm in.

Btw, received the tracking number, but I can't find the shipping company that it corresponds with. Does anyone know?

Mrc@ptuning · 10-21-2014, 05:38 PM

Quote:

Originally Posted by Trefoil

I'm in.

Btw, received the tracking number, but I can't find the shipping company that it corresponds with. Does anyone know?

www.ups.com

Snowball · 10-21-2014, 06:01 PM

Lol, I was going by the pics from the manufacturer lol (so a batch of 5 headers :p). That's actually quite a bunch of headers getting shipped out, great job guys!

Sent from my iPhone using Tapatalk

Burkwa · 10-22-2014, 09:29 PM

Hi another aussie here, sorry if I'm missing something here but will the headers fit a RHD vehicle? I read where you said that you may develop a system for RHD but was hoping you meant that was only needed for the components down stream of the header.

Hoping to use your headers with either stock/aftermarket/custom pipe work down stream. You've just made them too sexy I think my mrs is already jealous.

Mrc@ptuning · 10-22-2014, 10:50 PM

Quote:

Originally Posted by Burkwa

Hi another aussie here, sorry if I'm missing something here but will the headers fit a RHD vehicle? I read where you said that you may develop a system for RHD but was hoping you meant that was only needed for the components down stream of the header.

Hoping to use your headers with either stock/aftermarket/custom pipe work down stream. You've just made them too sexy I think my mrs is already jealous.

You're probably referring to our water meth injection system which is currently LHD only. The Ptuning header will fit both LHD and RHD (auto and m/t).

Just an FYI, there's only a handful of headers left in stock. Next production run will not happen until dec/jan. So if it's going to be a Xmas gift don't wait til Black Friday

MrC

10-20-2014, 07:50 PM	#239
Andrew025 Senior Member Join Date: Jul 2013 Drives: Neptune GR86 Location: Portland Posts: 3,862 Thanks: 1,438 Thanked 3,505 Times in 1,806 Posts Mentioned: 60 Post(s) Tagged: 2 Thread(s)	Yeah, I'd probably get one too depending on price. __________________

10-21-2014, 03:40 PM	#247
Andrew025 Senior Member Join Date: Jul 2013 Drives: Neptune GR86 Location: Portland Posts: 3,862 Thanks: 1,438 Thanked 3,505 Times in 1,806 Posts Mentioned: 60 Post(s) Tagged: 2 Thread(s)	Got my tracking too. __________________

10-21-2014, 06:01 PM	#250
Snowball Senior Member Join Date: Aug 2013 Drives: 2013 Whiteout Scion FR-S Location: Brampton, Ontario, Canada Posts: 112 Thanks: 126 Thanked 32 Times in 22 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	PTUNING 4-1 Full T304 SS Equal Length Double-Slip Race Header (200+whp 93 pum... Lol, I was going by the pics from the manufacturer lol (so a batch of 5 headers :p). That's actually quite a bunch of headers getting shipped out, great job guys! Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Equal-length (EL) catted header	ck-GT86	Engine, Exhaust, Bolt-Ons	1	04-10-2014 08:31 PM
PRE Stepped diameter 4 to 1 double slip collector Header	Jmonty	Engine, Exhaust, Transmission	9	02-28-2014 10:24 AM
BRZ/FR-S/GT86 – 4-1 Equal Length Header Group Buy	P&L Motorsports	Groupbuys	634	12-03-2013 06:36 PM
PHASTEK DC Sports Equal Length Header	PhastekSport	Engine, Exhaust, Bolt-Ons	3	11-14-2013 11:17 PM

10-21-2014, 03:34 PM	#245
s30series Senior Member Join Date: Aug 2014 Drives: 2015 BRZ Series.Blue Location: United States Posts: 230 Thanks: 6 Thanked 129 Times in 75 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	ORDER HAS BEEN SHIPPED BABY! Once UPS picks it up I'll know my estimated delivery date. If it gets here thursday, I'm taking it Friday to performace coatings in Atlanta to get high-temp ceramic coated (along with the over pipe) and then mounting it on Saturday. Next Friday I'll be at Topspeed motorsports hopefully to get it tuned. Excited level? 1065165135168165168

10-21-2014, 03:38 PM	#246
Mrc@ptuning Senior Member Join Date: Dec 2011 Drives: S1000RR Location: Manassas, VA Posts: 441 Thanks: 246 Thanked 520 Times in 218 Posts Mentioned: 53 Post(s) Tagged: 0 Thread(s)	Tuesday Update! As promised. First batch of Ptuning headers are shipping out today. The next batch will go out tomorrow. If you do not get a tracking # tonight, please check your email/voicemail. Our sales department have sent out a few address verification email for some of the earlier pre-orders to make sure the shipping address is still current. If you have pre-order your header and are getting it installed by us, your header has been put aside for your scheduled installed date. Again, thank you for your orders and your patience. MrC

10-22-2014, 09:29 PM	#251
Burkwa Junior Member Join Date: Jun 2013 Drives: 2012 toyota 86 Location: Adelaide Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hi another aussie here, sorry if I'm missing something here but will the headers fit a RHD vehicle? I read where you said that you may develop a system for RHD but was hoping you meant that was only needed for the components down stream of the header. Hoping to use your headers with either stock/aftermarket/custom pipe work down stream. You've just made them too sexy I think my mrs is already jealous.

User Name		Remember Me?
Password