Ca-Fi Dashlinq4 Android 4.1.1 Car Stereo - WHOA BABY! - Page 113 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

milhouse · 10-01-2014, 05:01 PM

Quote:

Originally Posted by DC2R

Ugh no radio for 3 weeks ?

Sent from my SM-N900T using Tapatalk

I put the stock back in. It was fine.

DC2R · 10-01-2014, 11:10 PM

Quote:

Originally Posted by milhouse

I put the stock back in. It was fine.

Sold mine at major loss :/

Sent from my SM-N900T using Tapatalk

phanguy · 10-02-2014, 12:54 AM

Quote:

Originally Posted by SilverlightPony

A tablet will not give you the sound quality of a proper head unit.

i disagree. i could never make this unit sound as good as my tablet sounded.

milhouse · 10-02-2014, 11:53 AM

Quote:

Originally Posted by DC2R

Sold mine at major loss :/

Sent from my SM-N900T using Tapatalk

That's why I just held on to mine.

Unrelated, can anyone with a subwoofer, or ideally an OEM Audio+ system, tell me what they set the Subwoofer Crossover setting to?

SilverlightPony · 10-02-2014, 12:25 PM

Quote:

Originally Posted by milhouse

Unrelated, can anyone with a subwoofer, or ideally an OEM Audio+ system, tell me what they set the Subwoofer Crossover setting to?

I left mine at whatever the default is. *shrug*

DC2R · 10-02-2014, 04:48 PM

Quote:

Originally Posted by SilverlightPony

I left mine at whatever the default is. *shrug*

Left nine default but had to max out gain etc on my preferred woofer with the single out split to two RCA. Might re wire to the plain old speaker RCA outs to see if I get a signal boost.

Sent from my SM-N900T using Tapatalk

milhouse · 10-02-2014, 10:57 PM

Just so I don't pull my hair out trying to fix it, does anyone know whether the DASHLINQ has an accelerometer? I'm not getting any G Force data in Torque.

Thanks.

DC2R · 10-02-2014, 11:43 PM

Quote:

Originally Posted by milhouse

Just so I don't pull my hair out trying to fix it, does anyone know whether the DASHLINQ has an accelerometer? I'm not getting any G Force data in Torque.

Thanks.

No I don't believe it does.

Sent from my SM-N900T using Tapatalk

petr · 10-03-2014, 01:01 AM

It seems there is no way to remap hardware buttons? Disp button does not give me any keycode, like its action is hardcoded into firmware.
I just want to change its action from next to play/pause.

petr · 10-04-2014, 11:40 AM

Anyone noticed that Poweramp does not remember last played position after power off? It seems as dashlinq shuts down without notifying all applications about it.

DC2R · 10-04-2014, 12:41 PM

My unit doesn't see Bluetooth OBD2 adapter after power on(/resume?). I have to go into settings and scan for Bluetooth devices-then it connects. Then I can launch torque. Anyone else?

Sent from my SM-N900T using Tapatalk

SilverlightPony · 10-04-2014, 07:43 PM

Quote:

Originally Posted by DC2R

My unit doesn't see Bluetooth OBD2 adapter after power on(/resume?). I have to go into settings and scan for Bluetooth devices-then it connects. Then I can launch torque. Anyone else?

Nope.

AlumaFX · 10-04-2014, 09:15 PM

Quote:

Originally Posted by DC2R

My unit doesn't see Bluetooth OBD2 adapter after power on(/resume?). I have to go into settings and scan for Bluetooth devices-then it connects. Then I can launch torque. Anyone else?

Sent from my SM-N900T using Tapatalk

Yep same here. If you set it to fast boot in settings it stays connected.

DC2R · 10-05-2014, 02:45 AM

Quote:

Originally Posted by AlumaFX

Yep same here. If you set it to fast boot in settings it stays connected.

I have car home disabled so it starts clean unless I remember to run radio app before shutting out p off car.will try and see if it stays connected if properly sleeping. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
REVIEW: Ca-Fi Toyota Universal - Stock Fitment ANDROID Stereo	SHIFTER	Electronics \| Audio \| NAV \| Infotainment	16	06-13-2017 07:23 PM
Android, bluetooth, Music, and the FR-S stock pioneer stereo	JayNutter	Electronics \| Audio \| NAV \| Infotainment	27	12-18-2014 04:54 AM
How to: Torque on an android powered stereo with no hacking v. Ca-Fi Dashlinq4	SHIFTER	Electronics \| Audio \| NAV \| Infotainment	29	04-07-2014 05:58 AM

10-03-2014, 01:01 AM	#1577
petr Member Join Date: Sep 2014 Drives: Mazda Miata Location: RUS Posts: 25 Thanks: 9 Thanked 10 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	It seems there is no way to remap hardware buttons? Disp button does not give me any keycode, like its action is hardcoded into firmware. I just want to change its action from next to play/pause.

10-04-2014, 11:40 AM	#1578
petr Member Join Date: Sep 2014 Drives: Mazda Miata Location: RUS Posts: 25 Thanks: 9 Thanked 10 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Anyone noticed that Poweramp does not remember last played position after power off? It seems as dashlinq shuts down without notifying all applications about it.

10-04-2014, 12:41 PM	#1579
DC2R Senior Member Join Date: Dec 2013 Drives: 2014 Scion FR-S Location: United States Posts: 1,021 Thanks: 699 Thanked 159 Times in 132 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	My unit doesn't see Bluetooth OBD2 adapter after power on(/resume?). I have to go into settings and scan for Bluetooth devices-then it connects. Then I can launch torque. Anyone else? Sent from my SM-N900T using Tapatalk

User Name		Remember Me?
Password