ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE

[bignrichlll]

Looooooool

[Lischynski]

Woo hoo made it to work! Hope everyone has a safe morning today. Insanity.

[kavanagh]

Rainpocolypse 2014!


Good luck everyone. We just went for coffee and came back home...

[Celadrielas]

Hey... Not to bother, but a very serious question.

Anyone have a flat bed or trailer I can get home with? Rain water so high in parkinglot, people had flooding in their cars. If not, it's chill... vehicle is staying here until further notice. I am on high ground (for now)

[EZWood]

Anyone interested in an agency power light weight crank pulley?

[Celadrielas]

Guys.... important moment of silence. I saw a grieving twin owner on Mcqueen Who was stuck deep deep in the water.

additionally, I think the twin member I work with sustained water inside their vehicle as well. Emme was, well, fortunate comparatively, though she was towed home.

[Gusha0426]

Today was crazy.

[AZFA20]

This is what is left guys. I sold a ton over the weekend. Please let me know what you are interested in and remember whatever you buy from this list comes with free professional install (Minus the heads and block, transmission does include half price install). Everything has been meticulously cared for and kept in perfect condition. If there are questions or you need pictures please feel free to contact me via PM. This stuff is moving fast so hurry while what is listed is still available.

*Driveshaft Shop Carbon Fiber Driveshaft - $700

*Radium Billet Fuel Rails in black w/ E85 compliant lines and AN fittings - $200

*Dynosty Billet Fuel Rails in polished aluminum w/ E85 compliant lines and AN fittings - $320 (Brand New)

*Cusco Vertical Center Mount Oil Catch Can in wrinkle black - $200

*Perrin Billet engine mounts - $300

*Go Fast Bits 3pcs. Pulley set in black (Crank, Water Pump, Alternator) - $280

*Mishimoto Thermostatic Oil Cooler in black w/ all lines and hardware - $450

*Moto-East Complete flexfuel system with plug n' play ECU harness - $550

*Transmission - $1100 (14k miles)

*M-Tec Shift Springs - $20

*Billet Pro Shop Short Shifter in red - $150

*Whiteline Trans mount insert - $20

*Radium Catch Cans (Dual) - $400

*Perrin Radiator Hoses in black - $60

*GT Spec Front Cross member tie bar and control arm supports - $100

*Perfect Condition FA20 assembled heads with all components - $1300 (14k)

*Perfect Condition FA20 Engine Block - $600 (14k)

*FA20 Intake manifold - $200

[VenomGT]

What a nice day to go for a drift haha

[Bonks86]

I have (4) lightly used 25mm Eibach spacers if anyone is interested. They were $420 new... looking to get $200 for them. I also have a pair of used spyder taillights as well $200 OBO




PM me if you have any questions.

Thanks

[AZFA20]

Originally Posted by Dallen

I found a set of springs in Goodyear on craigslist so I'll probably just grab those.

If you need your suspension installed feel free to PM me. I have installed countless member and non-members suspension systems including alignment.

Originally Posted by kavanagh

anybody here in AZ running an oil cooler on an NA car? And if so, did you go with an external radiator style (like Mishimoto or other), or the one that uses the coolant flow from the radiator (like off the Forester or STi)?

I have the Mishimoto for sale if interested. Works fantastic! All black version.

[B.Rice85]

So who ordered a new fermentation tank?

[Lischynski]

Successful little Monday for me. Just need @MaddBaggins sway bars, and my 2014 handling upgrade is complete!

[B.Rice85]

Originally Posted by Lischynski

Successful little Monday for me. Just need @MaddBaggins sway bars, and my 2014 handling upgrade is complete!Attachment 90308

I'm going thru tucson Wednesday if you need them picked up.