Subaru BRZ STi Style Side Skirts (ABS) - Page 21 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Lemar58 · 06-15-2014, 09:13 PM

Edit: found my awnser

SpectreRT · 06-19-2014, 10:35 PM

Does anyone know where you can buy replacement weather stripping for this? Mine fell out, and I'd like to replace it before it looks worse.

I went to a couple parts stores and they had no idea what I was talking about or looking for. =\

theflathead · 06-26-2014, 07:46 PM

i have the bayson sti kit, but i am clueless as to how the side skirts are held in the front. there is a screw and a hole in the skirt, but nowhere to screw it (and the screw doesn't even fit).

can someone enlighten me?

Andrew025 · 06-27-2014, 02:05 AM

Quote:

Originally Posted by theflathead

i have the bayson sti kit, but i am clueless as to how the side skirts are held in the front. there is a screw and a hole in the skirt, but nowhere to screw it (and the screw doesn't even fit).

can someone enlighten me?

It just screws into the fender liner. There is no hole in the fender liner though.

theflathead · 06-27-2014, 06:11 AM

Quote:

Originally Posted by Andrew025

It just screws into the fender liner. There is no hole in the fender liner though.

so did you drill a hole into it? and the screw seems to be too small for the hole in the skirt as well.

pics would be greatly appreciated

rhythmM · 07-08-2014, 09:47 PM

Quote:

Originally Posted by SpectreRT

Does anyone know where you can buy replacement weather stripping for this? Mine fell out, and I'd like to replace it before it looks worse.

I went to a couple parts stores and they had no idea what I was talking about or looking for. =\

I am curious about this as well.

Andrew025 · 07-08-2014, 09:51 PM

Quote:

Originally Posted by theflathead

so did you drill a hole into it? and the screw seems to be too small for the hole in the skirt as well.

pics would be greatly appreciated

I just used a screw driver. The liner is soft enough to not need a hole drilled.
My side skirt had a hole already though.

cslntuee · 07-19-2014, 04:07 PM

Did any people try Bayson R PU STI style front lip?

http://www.baysonr.com/12_14_Subaru_...-brz13-sti.htm

How's the fitment and quality?

Thanks.

jay_ · 07-21-2014, 06:25 PM

can i jus use any 3M tape or is there a specific one?

hanabie · 07-22-2014, 07:32 PM

has anyone here ever compared it with OEM sti kit?

calibrz · 07-22-2014, 08:09 PM

Quote:

Originally Posted by cslntuee

Did any people try Bayson R PU STI style front lip?

http://www.baysonr.com/12_14_Subaru_...-brz13-sti.htm

How's the fitment and quality?

Thanks.

fitment is horrible..i bought it and try install, both side is not balance, and I returned.

cslntuee · 07-23-2014, 12:10 AM

Quote:

Originally Posted by calibrz

fitment is horrible..i bought it and try install, both side is not balance, and I returned.

Really?
I just contacted with Bayson R today(7/22/2014) through E-mail, because it cannot purchase the PU STI front lip front their website, although list there.
Here is their response as below.
"The polyurethane version has even better fitment compare to the ABS version. We have got this front lip test fitted on the actual OEM bumper already. This front lip may be available tomorrow, I will send you an email as soon as the front lip is available."

Very confused now. ><
Thanks.

TONYpepperon1 · 07-23-2014, 05:39 PM

Quote:

Originally Posted by calibrz

fitment is horrible..i bought it and try install, both side is not balance, and I returned.

Your supposed to let it sit out in the sun for a little if this is the case. PU is pliable when heated up. It will flatten out.

calibrz · 07-24-2014, 03:45 PM

Quote:

Originally Posted by cslntuee

Really?
I just contacted with Bayson R today(7/22/2014) through E-mail, because it cannot purchase the PU STI front lip front their website, although list there.
Here is their response as below.
"The polyurethane version has even better fitment compare to the ABS version. We have got this front lip test fitted on the actual OEM bumper already. This front lip may be available tomorrow, I will send you an email as soon as the front lip is available."

Very confused now. ><
Thanks.

lmao..try it yourself. but their service is good. I returned the item and got my refund back the next day.

07-21-2014, 06:25 PM	#289
jay_ Member Join Date: Mar 2014 Drives: 2014 DGM Subaru BRZ limited 6MT Location: San Diego Posts: 29 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	can i jus use any 3M tape or is there a specific one? __________________

07-22-2014, 07:32 PM	#290
hanabie Senior Member Join Date: Feb 2012 Drives: WRB LMTD '13 Location: Phillips Ranch Posts: 1,246 Thanks: 184 Thanked 242 Times in 158 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	has anyone here ever compared it with OEM sti kit? __________________ My BRZ's Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STi Style Carbon Fiber Front Lip/Side Skirts/Rear [BRZ]	JPxM0Dz	Cosmetic Modification (Interior/Exterior/Lighting)	31	12-03-2013 11:57 PM
CS Style Polyurethane Side Skirts	Jive Turkey	Exterior Parts (Aero, Lighting, Etc.)	14	11-04-2013 10:49 PM
WTB CHARGESPEED STYLE SIDE SKIRTS.	bahanii	Want-To-Buy Requests	1	10-18-2013 03:06 PM
FS: CS Style Side Skirts and Rear Spats	FRS2000	Exterior Parts (Aero, Lighting, Etc.)	4	09-23-2013 01:15 PM
2013 SUBARU BRZ J STYLE PU SIDE SKIRTS	JPxM0Dz	Cosmetic Modification (Interior/Exterior/Lighting)	7	05-10-2013 12:29 PM

06-15-2014, 09:13 PM	#281
Lemar58 Member Join Date: Mar 2013 Drives: Scion FR-S Location: SoCal Posts: 87 Thanks: 38 Thanked 8 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Edit: found my awnser

06-19-2014, 10:35 PM	#282
SpectreRT Senior Member Join Date: Jul 2013 Drives: Subaru BRZ Location: usa Posts: 760 Thanks: 164 Thanked 319 Times in 210 Posts Mentioned: 17 Post(s) Tagged: 2 Thread(s)	Does anyone know where you can buy replacement weather stripping for this? Mine fell out, and I'd like to replace it before it looks worse. I went to a couple parts stores and they had no idea what I was talking about or looking for. =\

06-26-2014, 07:46 PM	#283
theflathead Member Join Date: Nov 2013 Drives: 2014 WRB BRZ Limited 6MT Location: htx Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i have the bayson sti kit, but i am clueless as to how the side skirts are held in the front. there is a screw and a hole in the skirt, but nowhere to screw it (and the screw doesn't even fit). can someone enlighten me?

07-19-2014, 04:07 PM	#288
cslntuee Senior Member Join Date: Sep 2012 Drives: Subaru BRZ Limited Location: Lexington MA Posts: 962 Thanks: 604 Thanked 103 Times in 79 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Did any people try Bayson R PU STI style front lip? http://www.baysonr.com/12_14_Subaru_...-brz13-sti.htm How's the fitment and quality? Thanks.

User Name		Remember Me?
Password