Saskatchewan Thread

[Nsot]

Originally Posted by TB

Coilovers installed and adjusted to where I want them! If you're on the fence, but not sure if you want to do the install.. Do it. It took me and a buddy(oil change guys) 3 hours, very doable!

Looks great, makes the stock wheels look much better too. Do you plan on getting an alignment? If so, where is a good place to go here?

[TB]

Well I work at Sherwood Chev, so I could if I wanted to but I haven't decided. I did a check and they don't look too far out, bit of toe but less than .8*. Thinking I'll wait until I get wheels and fully dial in right where I want it to get an alignment.

[frs baby]

whos actually in boxer battle

[SkevoX]

I'm in with my evo but I'm cutting it close with tuneing might bring my frs instead not worth killing a motor just cuz I was to gritty to get it on the track

[JPxM0Dz]

@MrJesse Let me know a good time and place to pickup the headers from you. I'll be in Regina around noonish t'mor

Sent from OmegaROM S5

[IIDutch]

I'm in boxer battle, there is another track day this Monday at three flags, anyone going? I know I am!

The question is do I run my rotas which are a lot lighter than stock but have less tread? Tires are Continental Pros (I think that's the model) 225/45/17 on a 17x7.5

Also keep in mind my rotas are still for sale for $1000 with the tires

[JPxM0Dz]

Big thanks! @MrJesse Got my Borla Headers

[frs baby]

im headin to the track mon

[JPxM0Dz]

Just debating between having my headers ceramic coated or just wrapping them. I've read a few debates between the two and the pros and cons with both


Ceramic Coating Pros:

. Better heat shield and protection
. Looks better than wrap

Cons:

. Cost - $250 - $275
. Does not address the known rattles with the flex joints on the Borla


Titanium Header Wrap Pros:

. Good heat shield and protection
. Addresses the known rattles on flex joints
. Cost - $30 - $60

Cons:

. Not as good as ceramic
. Potential issues with moisture - [Shouldn't be an issue with our cars with the skid plate to keep water off the header]
. Oil spill on header wrap could be potentially bad for a fire


Post your thoughts! Thanks

[frs baby]

by the way you have to be 18 to race on 3 flags

[JPxM0Dz]

Hooked up with Jason AKA IIDutch at Timmies last night for coffee
Nice guy and very knowledgeable - FRS looks great!


Forgot to snag some pics

[IIDutch]

Originally Posted by JPxM0Dz

Hooked up with Jason AKA IIDutch at Timmies last night for coffee
Nice guy and very knowledgeable - FRS looks great!


Forgot to snag some pics

We'll get some pics tonight if your out! I'll have my camera with me then. Had a great chat though, was awesome to see a twin all done up like yours

Wait, 18 at three flags even if I can get parental consent? I'm 17 still for another month hahah

[MrJesse]

Originally Posted by IIDutch

We'll get some pics tonight if your out! I'll have my camera with me then. Had a great chat though, was awesome to see a twin all done up like yours

Wait, 18 at three flags even if I can get parental consent? I'm 17 still for another month hahah

You can drive if you have parental consent or a legal guardian with you as far as I know.

[JPxM0Dz]

Popped down to Show & Shine over lunch hour. Alot of nice rides! Spotted 2015 WRB in parking area, not the show. Now having seen it in person, I really like the blue stitching, however not a fan of the blue leather and the painted red brakes. It appears to be driven on grids, hense all the dust inside wheels and rear bumper. Everything else looked good. No FRS or BRZ in show that I could see

Sent from OmegaROM S5