Austin

[MysteryMachine]

Originally Posted by FR-S Matt

Well, I got the Goodrich SS lines on and the TRD pads in. I'm worn out.... Tomorrow I will be bleeding all the brakes with the Motul 5.1 fluid then bedding them in. I really don't like brakes because they're so messy. Probably because I was doing lines as well. Bleeding isn't so bad.

let us know how much of a difference you feel the upgrade made!

Sent from my Moto X via Tapatalk

[MysteryMachine]

I'll be in downtown Austin for brunch from 1130 till probably 130 and then home in northwest Austin not far from 360 and 2222. I can't be away long as I am trying to potty train a puppy (we adopted Grace's 4 month old neice). For Eric and Jyn if you want to arrange a listen let me know and we can work something out.

Sent from my Moto X via Tapatalk

[ron_n_tx]

I'm at Jerry's Alignment shop now. I installed SPC lca's and cam bolts last night at DIYTX.

Sent from my SCH-I545 using Tapatalk

[psk]

Originally Posted by Turkish

Nice, in a couple days you should check to see if there are any leaks. Did you swap the rear differential oil yet?

Sent from my SM-G900V using Tapatalk

oh, i haven't installed them yet. i meant that it had arrived, haha. i'll probably need your help and second eye on the install. i still don't want to put it on until i get those hanger rings off.

[86-tundra]

I still need to install my rear shifter brushing. anyone need anything done at diy this week?

[Turkish]

Originally Posted by trevorovert

I still need to install my rear shifter brushing. anyone need anything done at diy this week?

I do not, but if I am available I would be able assist.

[FR-S Matt]

Originally Posted by trevorovert

I still need to install my rear shifter brushing. anyone need anything done at diy this week?

Tranny/Diff oil swap. Got both of my Motul Gear 300's in with the crush washers.

[86-tundra]

Originally Posted by FR-S Matt

Tranny/Diff oil swap. Got both of my Motul Gear 300's in with the crush washers.

just scheduled a meeting for thursday night. so I could do it thursday 5-7ish or tomorrow after work?

[Jyn]

Would it be cheap/easier to just rent a bay Thursday evening at DIY? How late are they open? I have an OEM+ Audio system I plan on installing, but I'm slow as constipation when I install stuff for the first time.

[FR-S Matt]

Originally Posted by Jyn

Would it be cheap/easier to just rent a bay Thursday evening at DIY? How late are they open? I have an OEM+ Audio system I plan on installing, but I'm slow as constipation when I install stuff for the first time.

Took me an entire day to do pads, lines, and a fluid flush. I don't rush anything I haven't done before. Besides, look at the money you save. That's where it matters most!

[86-tundra]

thursday meeting got rejected, so do you guys wanna go to DIY Thursday at 5 ish? Mine will take about 30 mins. @Jyn I could help install your stuff. you should get one of the flat bays. I've done plenty of audio installs so I'm sure I could offer some guidance or assistance

[Jyn]

Originally Posted by trevorovert

thursday meeting got rejected, so do you guys wanna go to DIY Thursday at 5 ish? Mine will take about 30 mins. @Jyn I could help install your stuff. you should get one of the flat bays. I've done plenty of audio installs so I'm sure I could offer some guidance or assistance

I'll see what's up. I have the guy from work that installed his OEM+ system helping out. Just wondering how much the bays are otherwise I'll just use my car port at my apt.

[Semprini]

$10/hr for flat. Tools included

Sent from my HTC One_M8 using Tapatalk

[86-tundra]

Originally Posted by Jyn

I'll see what's up. I have the guy from work that installed his OEM+ system helping out. Just wondering how much the bays are otherwise I'll just use my car port at my apt.

yeah, $10 an hour. you don't really need it honestly.