Post the Wheels You want On your FRS/BRZ!!

[poormans_LFA]

Originally Posted by igorot

one seriously CLEAN looking GR STI. love it.

[igorot]

Originally Posted by poormans_LFA

one seriously CLEAN looking GR STI. love it.

yes this is the type of fitment i want for street. and just get something much lighter if i ever go tracking

[poormans_LFA]

those wheels look like Advan RS's, but I could be very wrong. they look nice.

[igorot]

actually they are rota dpt, replicas of the volk ce28n. wont feel as bad when you curb lol

[poormans_LFA]

Originally Posted by igorot

actually they are rota dpt, replicas of the volk ce28n. wont feel as bad when you curb lol

beautiful. too bad they're Rota's.

[WhiteGDB]

And it's also a WRX not an STI

[MmmHamSandwich]

Under my consideration...



Don't copy me or I will beat you with a shovel.

[igorot]

Reminds me of the old Acura ls mesh

[JACK 8URT0N]

Just got these on ebay. 17x7.5 +48

[NYC BRZ]

Originally Posted by jdrxb9

FYI, to be legal for SCCA stock you also have to be within 1/4" (6.35mm) of the stock 48mm offset, so the Daylite is no good.

I'm looking at Kosei K1-TS. Kosei lists them as available in 17x7, 42mm offset, 5x100/114.3 and they should be ~$200 and ~15lb but I can't find a source yet at this offset.

I looked at the Koseis on TireRack and it looks like the K4R is available in 17x7 and only weighs 14lbs! I wonder if the 50mm offset and a slightly wider 225 tire will cause them to rub?

http://www.tirerack.com/wheels/Wheel...ll&sort=Weight

[quik1987]

Is there anything that looks like this?

[Draco-REX]

Originally Posted by jdrxb9

FYI, to be legal for SCCA stock you also have to be within 1/4" (6.35mm) of the stock 48mm offset, so the Daylite is no good.

I thought the stock offset was 53mm?

[NYC BRZ]

Originally Posted by quik1987

Is there anything that looks like this?

Wedssport TC105N is pretty close. Plus they're super light weight ~15lbs

[jdrxb9]

Originally Posted by Draco-REX

I thought the stock offset was 53mm?

http://www.ft86club.com/forums/showp...3&postcount=21

you can probably find other sources as well

Originally Posted by NYC BRZ

I looked at the Koseis on TireRack and it looks like the K4R is available in 17x7 and only weighs 14lbs! I wonder if the 50mm offset and a slightly wider 225 tire will cause them to rub?

With a higher offset wheel, you can just run spacers to get back to stock offset or even stock plus the allowed 1/4". Personally, I'd rather have a wheel with the offset allowance built in so I don't have to mess with the spacers and/or worry about having enough stud length. Unfortunately, Kosei doesn't list any K4R info on their website and I haven't found any other source for what offsets might be available on the K4R.