WHAT DID YOU DO TO YOUR BRZ TODAY?

[ToyoburuBRZ]

Originally Posted by chu.waht

Apply some heat, that may help.

And I did the same over the weekend as well: wrapped and dipped interior trim. The dipped trim is temporary.

Looks fantastic. I just picked up some matte black vinyl to do the same thing

[MstrSHAKE]

Changed out my transmission and differential fluid!

Sent from my HTC One_M8 using Tapatalk

[Khazzy]

Originally Posted by ToyoburuBRZ

Looks fantastic. I just picked up some matte black vinyl to do the same thing

Liking the black brushed aluminum vinyl on the dash! I did mine last week in Anthracite Carbon 3M to match the tS dash.

[JPxM0Dz]

Pioneer AVH-4000NEX installed

[BRZtoni]

Just installed my STI LIP KIT

thanks to my GF for the extra hand lol

[Davesta619]

Originally Posted by JPxM0Dz

Pioneer AVH-4000NEX installed

That's the same headunit I'm going to buy. Can you list off other stuff you got for install? What bracket? Were you able to make that USB port at the bottom corner work with the pioneer? Thanks!

[Simon99]

Originally Posted by BRZtoni

Just installed my STI LIP KIT

thanks to my GF for the extra hand lol

ouhh painted ! diffetent but i like

[Evil Jesus]

Originally Posted by BRZtoni

Just installed my STI LIP KIT

thanks to my GF for the extra hand lol

Looks very nice when paint matched.

[Freude am Fahren]

I normally don't like it matched, but it works well when you leave the bottom black like that.

[Vten]

installed the Oz superleggera III forged wheels. 18x8/9 et 40/45 w/ Michelins PSS 225/40 and 255/35s 5x120s . Im using the 25mm conversion adapters to mount .


camber is set on -2f and -2.5R.


I think the tires are a bit too fat , especially the rear ...massive mexipoke :P
im gonna try to use 215/40 and 225/35 later on.


what do you guys think compare to the copper one I was using ?

[rburrow87]

Finally made some time to wash the BRZ and being in California with the constant drought, I decided to try out the Turtle Wax Rinseless stuff. It's definitely nice to save a good bit of water by not needing to rinse. Also nice being able to do it in the sun since you dry the sections as you wash. I will pick up some ONR when I run out of the Turtle Wax, I think I've read that it works better. It's nice that Turtle Wax is at Walmart for so cheap though.

Also, finally got around to making a hole in the front tow hook cover and adding a grommet for the plate relocator:



And finally, debadged "Subaru" from the trunk. I think I like it with just "BRZ" and the Subaru logo. The letters just peeled off using my fingers, no heat gun or fishing line/dental floss, and they didn't even leave any residue. All I had to do after was hit it with some quick detailer/wax.



Couple more pictures in here: http://imgur.com/a/nX7Q1

[Kinger]

Not all in one day but finished my perrin intake with the inlet hose, got the windows tinted 35% all around and painted the rims.....all in all a very productive few days!!

[wtrxprs007]

Originally Posted by Kinger

Not all in one day but finished my perrin intake with the inlet hose, got the windows tinted 35% all around and painted the rims.....all in all a very productive few days!!

With all that red, you should have at least +500kW more

[uEih]

Originally Posted by chu.waht

Apply some heat, that may help.

And I did the same over the weekend as well: wrapped and dipped interior trim. The dipped trim is temporary.

What did you use for that dash area? It looks almost like a metallic black?