Where to buy 17x9.5 +38 RPF1 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

BadBRZ · 06-18-2014, 09:16 PM

I've searched the forums, Googled and apologize for asking this if it has already been asked..

I'm looking for 17x9.5 RPF1's 5x100 +38. I know they sell them and i'm not particular on color, i'll get them stripped and powder coated.

Thank you.

vividracing · 06-18-2014, 09:19 PM

17x9.5 does not come in 5x100 from Enkei. It will only be possible if a vendor ordered 40 pieces in bulk.

BadBRZ · 06-18-2014, 11:30 PM

it does come in 5x100 and 17x9.5.. i read a thread back when I was just lurking that said they are available but only in silver

17x9.5 5x100 et38

sadly though I've searched and searched and can't find it!!

FT-86 SpeedFactory · 06-18-2014, 11:35 PM

Quote:

Originally Posted by BadBRZ

it does come in 5x100 and 17x9.5.. i read a thread back when I was just lurking that said they are available but only in silver

17x9.5 5x100 et38

sadly though I've searched and searched and can't find it!!

As Vivid said 17x9.5 5x100 is a VERY special size and not something that has been made by Enkei in a very long time. We stock 17x9 +35 in silver if you are still hunting for something close.

A 17x9.5 +38 would have some fitment issues on the FRS/BRZ anyway.

BadBRZ · 06-18-2014, 11:48 PM

Quote:

Originally Posted by FT-86 SpeedFactory

As Vivid said 17x9.5 5x100 is a VERY special size and not something that has been made by Enkei in a very long time. We stock 17x9 +35 in silver if you are still hunting for something close.

A 17x9.5 +38 would have some fitment issues on the FRS/BRZ anyway.

on coils with a 1" drop their would be issues?

AutoRnD · 06-19-2014, 01:13 AM

That wheel is our exclusive and is currently on order. It is special production run as are most of the wide 5x100 enkei fitments

http://www.autornd.com/product-p/rpf...5100-38-si.htm

Might take 4 months to get here as the order was recently placed.

Currently the RP03 is in stock in that fitment in SBC Finish. It's pretty awesome and concave.

We are new here and hope this answers your question without over stepping any forum policies. We are an authorized vendor here.

FT-86 SpeedFactory · 06-19-2014, 01:38 AM

Quote:

Originally Posted by BadBRZ

on coils with a 1" drop their would be issues?

No problems at all on the 17x9 +35. Simple, flush, and effective.

NoppyNop · 06-19-2014, 03:30 AM

Quote:

Originally Posted by BadBRZ

I've searched the forums, Googled and apologize for asking this if it has already been asked..

I'm looking for 17x9.5 RPF1's 5x100 +38. I know they sell them and i'm not particular on color, i'll get them stripped and powder coated.

Thank you.

I have a set that I've been possibly thinking about selling. If you are local in So Cal and the price is right I may have what you are looking for.

BadBRZ · 06-19-2014, 04:42 AM

I'm about as local to socal as i am new york city :-P but if they don't fit like ft86sf said i'd have to pass :-(

car_roll · 06-19-2014, 05:22 AM

Quote:

Originally Posted by FT-86 SpeedFactory

As Vivid said 17x9.5 5x100 is a VERY special size and not something that has been made by Enkei in a very long time. We stock 17x9 +35 in silver if you are still hunting for something close.

A 17x9.5 +38 would have some fitment issues on the FRS/BRZ anyway.

Care to explain? Are you referring to fitment issues with the suspension or the fenders?

FR-S Matt · 06-19-2014, 07:54 AM

Quote:

Originally Posted by car_roll

Care to explain? Are you referring to fitment issues with the suspension or the fenders?

Considering I am running 18X9.5 squared on coils, I would say they fit just fine....

and yes, the RP03's in SBC on 18X9.5 look sick.

BadBRZ · 06-24-2014, 01:21 AM

http://www.ft86club.com/forums/showp...11&postcount=1

to answer all the nay sayers :P

AutoRnD · 12-11-2014, 07:24 PM

There are tons in stock right now. As seen here.

You would need coilovers to fit these due to backspacing issues up front.

http://www.autornd.com/product-p/rpf...5100-38-si.htm

einrejosh · 03-06-2015, 10:02 PM

Hi, just saw your thread. I own a set of 17x9.5 +38 RPF1's. Im not selling just relating fitment issues they're talking about.
Yes, it'll rub the shock if youre stock. Im lowered on Fortune Auto 500's with 20mm body thread left on the rear and 25mm left in the front. Also I have Stance rear LCA.

NOW, as fitment. Theyre perfect. At least in my opinion. I'm running 245/40-17 YK580 since I'm just looking for the best bang for my buck at the time. But there is no rubbing issues. My fender is approximately 24 1/4 inches from the ground all around. and yeah. idk what else. just bugged me how they said there would be fitment issues when there isnt. just let me know if you want pics.

Oh, also, im -2 camber front and -1.5 rear, i want to zero out the rear camber but I couldnt without buying shorter toe arms aka aftermarket. but yes. they fit, and yes theyre rare, I got them from a guy from craigslist that was selling them for auto RnD for 1100.

06-18-2014, 09:16 PM	#1
BadBRZ Banned Join Date: Jun 2014 Drives: Subaru Location: Interwebs Posts: 357 Thanks: 68 Thanked 158 Times in 83 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Where to buy 17x9.5 +38 RPF1 I've searched the forums, Googled and apologize for asking this if it has already been asked.. I'm looking for 17x9.5 RPF1's 5x100 +38. I know they sell them and i'm not particular on color, i'll get them stripped and powder coated. Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help, 17x9 +35 or +45 RPF1?	wgnzlz	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	123	03-11-2020 12:38 AM
used RPF1 17x9 +35 or new Rota RT5 17x9 +42	Roadcone	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	06-12-2014 02:16 AM
RPF1 17x9.5 +38	einrejosh	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	7	04-03-2014 06:25 PM
Group Buy: Enkei RPF1 17x9 +35, 17x9.5 +38, 18x9.5 +38 *In Stock*	LSD Motorsports	Groupbuys	246	08-29-2013 02:35 PM
FTL 17x9 RPF1 +45	LevinPhan	Wheels and Tires	5	08-16-2013 07:26 PM

06-18-2014, 09:19 PM	#2
vividracing Join Date: May 2012 Drives: 2013 Scion FR-S Location: Gilbert, Arizona Posts: 2,593 Thanks: 491 Thanked 1,065 Times in 617 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	17x9.5 does not come in 5x100 from Enkei. It will only be possible if a vendor ordered 40 pieces in bulk.

06-18-2014, 11:30 PM	#3
BadBRZ Banned Join Date: Jun 2014 Drives: Subaru Location: Interwebs Posts: 357 Thanks: 68 Thanked 158 Times in 83 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	it does come in 5x100 and 17x9.5.. i read a thread back when I was just lurking that said they are available but only in silver 17x9.5 5x100 et38 sadly though I've searched and searched and can't find it!!

06-19-2014, 01:13 AM	#6
AutoRnD Senior Member Join Date: Jan 2013 Drives: Fast ones Location: Bay Area Posts: 207 Thanks: 1 Thanked 7 Times in 7 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	That wheel is our exclusive and is currently on order. It is special production run as are most of the wide 5x100 enkei fitments http://www.autornd.com/product-p/rpf...5100-38-si.htm Might take 4 months to get here as the order was recently placed. Currently the RP03 is in stock in that fitment in SBC Finish. It's pretty awesome and concave. We are new here and hope this answers your question without over stepping any forum policies. We are an authorized vendor here.

06-19-2014, 04:42 AM	#9
BadBRZ Banned Join Date: Jun 2014 Drives: Subaru Location: Interwebs Posts: 357 Thanks: 68 Thanked 158 Times in 83 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	I'm about as local to socal as i am new york city :-P but if they don't fit like ft86sf said i'd have to pass :-(

06-24-2014, 01:21 AM	#12
BadBRZ Banned Join Date: Jun 2014 Drives: Subaru Location: Interwebs Posts: 357 Thanks: 68 Thanked 158 Times in 83 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	http://www.ft86club.com/forums/showp...11&postcount=1 to answer all the nay sayers :P

12-11-2014, 07:24 PM	#13
AutoRnD Senior Member Join Date: Jan 2013 Drives: Fast ones Location: Bay Area Posts: 207 Thanks: 1 Thanked 7 Times in 7 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	There are tons in stock right now. As seen here. You would need coilovers to fit these due to backspacing issues up front. http://www.autornd.com/product-p/rpf...5100-38-si.htm

03-06-2015, 10:02 PM	#14
einrejosh Senior Member Join Date: Feb 2014 Drives: 2014 Scion FR-S Location: Fremont, Ca Posts: 109 Thanks: 18 Thanked 37 Times in 26 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	Hi, just saw your thread. I own a set of 17x9.5 +38 RPF1's. Im not selling just relating fitment issues they're talking about. Yes, it'll rub the shock if youre stock. Im lowered on Fortune Auto 500's with 20mm body thread left on the rear and 25mm left in the front. Also I have Stance rear LCA. NOW, as fitment. Theyre perfect. At least in my opinion. I'm running 245/40-17 YK580 since I'm just looking for the best bang for my buck at the time. But there is no rubbing issues. My fender is approximately 24 1/4 inches from the ground all around. and yeah. idk what else. just bugged me how they said there would be fitment issues when there isnt. just let me know if you want pics. Oh, also, im -2 camber front and -1.5 rear, i want to zero out the rear camber but I couldnt without buying shorter toe arms aka aftermarket. but yes. they fit, and yes theyre rare, I got them from a guy from craigslist that was selling them for auto RnD for 1100.

User Name		Remember Me?
Password