WTS: NoFlorida - *BRAND NEW* XXR521 18x10 +25

[636]

Posting this here because I don't plan on shipping these, and would like to keep it local. I'm located in Jacksonville/St. Augustine, FL.

I'm selling my XXR 521 18x10 +25 - 5x100 in a gold finish with a 4 inch stepped machine lip. These are BRAND NEW, and have never had tires mounted on them, nor have they been on a car period. I bought these new, took them out of the boxes and put them in my room. I've decided to sell them, because I want to go a more aggressive route. If they don't sell, then I guess I'll put them on my car, but until then!

Will also include center caps, and boxes. (if you want them)

XXR 521
18x10 +25
5x100.
4" lip.

I'm asking $675, FIRM. Like I said, I don't need to sell these so I won't sell them for less than I want.

Call/Text me at 2o3.331.5o85. Preferably text!










PM me for any questions + inquiries! Thanks.

[King Tut]

I figured I would add a side note. These will take quite a bit of work to fit on a BRZ/FR-S.

[636]

Originally Posted by King Tut

I figured I would add a side note. These will take quite a bit of work to fit on a BRZ/FR-S.

Not at all. I'm 4" lowered and will fit fine with about -3 degrees of camber all around. On a stock height, or slightly lowered BRZ/FRS these will fit fine.

[King Tut]

Originally Posted by 636

Not at all. I'm 4" lowered and will fit fine with about -3 degrees of camber all around. On a stock height, or slightly lowered BRZ/FRS these will fit fine.

I am speaking to the non stance crew where 4" of lowering and -3 degrees of camber on a street car is "quite a bit of work". My guess is that you also were not running anything close to a 10" wide tire. My point is to emphasize that these wheels are way outside the normal sizes that are run on a BRZ/FR-S.

[636]

Originally Posted by King Tut

I am speaking to the non stance crew where 4" of lowering and -3 degrees of camber on a street car is "quite a bit of work". My guess is that you also were not running anything close to a 10" wide tire. My point is to emphasize that these wheels are way outside the normal sizes that are run on a BRZ/FR-S.

Yeah I supposed planning to run a 225/35 on an 18x10 isn't really close to a 10" wide tire.



But for people who are going to be buying these wheels, I doubt they'd buy wheels like this if they're planning on tracking.