WHAT DID YOU DO TO YOUR BRZ TODAY?

[JPxM0Dz]

Originally Posted by t.chk

Originally it was not orderable through a dealer (I tried both toyota and Subaru) and the only way to get them was by ordering them from japan and pay the shipping change. Out of curiosity I asked my dealer if they can get them now, they tried looking and still nothing (this was last month).

So the only real effective way to get them is to pay a lot of money. I got mine from Canada for much cheaper than that.

Where in Canada did you order from ?

[NCItaly]

Installed my crawford air oil separator. Really easy and didnt have to remove AC unit (good thing because that would mean removing part of my supercharger lol)

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[t.chk]

Originally Posted by JPxM0Dz

Where in Canada did you order from ?

There was someone on ebay selling them. (probably bought a 4pack from jp and was recouping cost).

[JPxM0Dz]

Originally Posted by t.chk

There was someone on ebay selling them. (probably bought a 4pack from jp and was recouping cost).

Nice find! I'll order directly from JP

Sent from AllianceROM S5

[Kostamojen]

Originally Posted by t.chk

Originally it was not orderable through a dealer (I tried both toyota and Subaru) and the only way to get them was by ordering them from japan and pay the shipping change. Out of curiosity I asked my dealer if they can get them now, they tried looking and still nothing (this was last month).

They work as of now.

But getting them via JP now costs 2x as much as even listed price from a dealer... You can probably get them less shopping around a bit, and again, zero shipping.

But its his money I guess...

[krayzie]

Originally Posted by Kostamojen

Received and installed underpanels that don't come on the '13/'14 but are going to be on the '15's here in the US...

USDM part numbers:

56411CA000 (1)
56411CA010 (1)
42045CA020 (1)
42045CA030 (1)
909140065 (30 can never have too many clips :P )
901000344 (3 bolts that are needed for the big panels, rest can be re-used)
909140007 (4 big clips for the rear panels)

There should be 4 nuts also for the rear panels.

[FloridaBRZ]

Originally Posted by BirdTRD

Built this. Needed to make better use of the passenger seat since I pretty much work out of my car. Still need to build a piece to fill the gap between the rear side and the seat back...should have that done tomorrow.

Looks great. Now just get rid of the ravens cup! What they did to the team last season was horribad.

[Kostamojen]

Originally Posted by krayzie

There should be 4 nuts also for the rear panels.

3 actually, one is already there. I ended up using nuts I already had for thst so I didn't get a part number.

[turbosupra94]

These pins also fit the authentic STI front lip and I assume side skirts in case anyone wondered. I ordered one to replace the badge on my STI front lip. The red lettering had half been washed/scratched off I guess from drying the car.

Originally Posted by JPxM0Dz

Ordered a few of these recently with my last order from JP. Just a word of warning, these badges have three pins on the backside and are obviously designed for the STi spoiler as per description on package and website. I just assumed they had a flat back with 3M applied just like the STi badges that BaysonR sells or others on ebay. Not a big deal, the pins can be easily removed with a dremel and 3M reapplied if desired

Unfortunately the pics and description at JP do not reflect any info on the pins located on the backside as shown in my pics
In comparison to the other STi badges sold by BaysonR for their ABS STi side skirts they sell, they are virtually identical minus the 3 pins found on the ones from JP. So just a heads up again for those looking to buy these in the future


http://www.japanparts.com/db/parts_d...03&SEARCH_page=

[JPxM0Dz]

Originally Posted by turbosupra94

These pins also fit the authentic STI front lip and I assume side skirts in case anyone wondered. I ordered one to replace the badge on my STI front lip. The red lettering had half been washed/scratched off I guess from drying the car.

Yeah that would make sense for fitment. Surprised that half the red lettering is coming off your badge, after all this is such a sought after genuine STi product. Ooohhh it's gotta be genuine STi part to be high quality right ?

My BaysonR STi badges are still perfect and are an exact replica of the ones JP sells, minus the pins of course

[uEih]

Originally Posted by Kotu100

Not genuine Sti.
The lip should have come with the rubber, i would send a message to wherever u got em from and they'll probably send you some.

*edit*
This stuff isnt 100% the same but should work in a pinch.
http://www.trimlok.com/prod/Fender-F...663BT_164.aspx

Do you have the link to the person you bought it from? I know depending on who sold it, they come with different parts. Most of the lips sold I've seen so far didn't come with it.

[navanodd]

Picked it up from the dealer with the rattle in the window switches fixed and the ECU flashed to the latest update to fix the intermittent idle issue.

[B-R-Z]

What's the fix for rattling widow switches? New ones?

[G-awesome]

Originally Posted by Crows

Got my first speeding ticket in 20 years today
Thing is, if I was speeding, it was by very little. I told the cop that and he said "Im tired of you guys in these high performance cars"

That cop is a ****. Just because you have a sports car doesn't make you like every stereotypical idiot with a sportscar. I'm curious, how fast are you going from the speed limits? Cops will usually let 10ish km/h slide depending on the flow of traffic and amount of cars doing it. Like others said, dispute the ticket and bump the court date last min with an excuse. If the cop doesn't show up or the courts get tired of you prolonging the date, then you're home free!