WHAT DID YOU DO TO YOUR BRZ TODAY?

[FLYFISHR]

Originally Posted by Kotu100

I think this is what you're talking about. I put mine on the sides to keep the upper part of the bumper getting scratched over time from the rigid abs plastic.

I take it that you stuck the rubber onto the lip and not the bumper.
Thanks for the picture it helps clear things up. Did you put a screw into the back side of the lip into the fender well to reduce movement?

[Kotu100]

Originally Posted by FLYFISHR

I take it that you stuck the rubber onto the lip and not the bumper.
Thanks for the picture it helps clear things up. Did you put a screw into the back side of the lip into the fender well to reduce movement?

Yup the rubber goes on the egde of the lip, its kinda tricky to get it in there tight but once you get a hang of it its easy.
I did put screws in the fender well too, makes it much sturdier and reduces the gap from lip to bumper.

[Annahra]

Took my car in to have the weird random dents on my hood popped out and the PDR guy found a couple dozen more tiny ones once we got it under the lights. Yay hail!

[BirdTRD]

Built this. Needed to make better use of the passenger seat since I pretty much work out of my car. Still need to build a piece to fill the gap between the rear side and the seat back...should have that done tomorrow.

[Simon99]

Originally Posted by BirdTRD

Built this. Needed to make better use of the passenger seat since I pretty much work out of my car. Still need to build a piece to fill the gap between the rear side and the seat back...should have that done tomorrow.

Wow that's neat bro !

[chas3wba0]

Originally Posted by BirdTRD

Built this. Needed to make better use of the passenger seat since I pretty much work out of my car. Still need to build a piece to fill the gap between the rear side and the seat back...should have that done tomorrow.

Wow make me one too please LOL!

[ronboogieon]

Went plastidip crazy. Navy Blue in the interior. Aluminum for the wheels. Added a coat of glossifier to add a little shine.

[Kostamojen]

Received and installed underpanels that don't come on the '13/'14 but are going to be on the '15's here in the US...




USDM part numbers:

56411CA000 (1)
56411CA010 (1)
42045CA020 (1)
42045CA030 (1)
909140065 (30 can never have too many clips :P )
901000344 (3 bolts that are needed for the big panels, rest can be re-used)
909140007 (4 big clips for the rear panels)

[Hachiroku14]

...custom non-drilled/magnetic angled plate holder...

[Shedd22]

Originally Posted by Hachiroku14

...custom non-drilled/magnetic angled plate holder...

Dem wheels

[JPxM0Dz]

Originally Posted by Kostamojen

Received and installed underpanels that don't come on the '13/'14 but are going to be on the '15's here in the US...


USDM part numbers:

56411CA000 (1)
56411CA010 (1)
42045CA020 (1)
42045CA030 (1)
909140065 (30 can never have too many clips :P )
901000344 (3 bolts that are needed for the big panels, rest can be re-used)
909140007 (4 big clips for the rear panels)

The complete package should be here also... I'll be ordering a set directly from JP

http://www.ebay.com/itm/SUBARU-GENUI...5c5a32&vxp=mtr

[unsurety]

Originally Posted by Kostamojen

Received and installed underpanels that don't come on the '13/'14 but are going to be on the '15's here in the US...

USDM part numbers:

56411CA000 (1)
56411CA010 (1)
42045CA020 (1)
42045CA030 (1)
909140065 (30 can never have too many clips :P )
901000344 (3 bolts that are needed for the big panels, rest can be re-used)
909140007 (4 big clips for the rear panels)

Part #s don't work in the Toyota catalog

They look like Toyota #s, anyway. I'll try again later if I remember, but some other 2015 part #s work already.

[lostcitystar]

debating on the start screen. Stig wins for now.


Sent from my iPhone using Tapatalk

[Simon99]

Got my bumper gap fixed by the dealer and the fuel pump (for now)

Sent from my SGH-I337M using Tapatalk