glamcem's Rotrex Supercharged (Krafwerks) _PART OUT - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

glamcem · 05-20-2014, 01:58 PM

Quote:

Originally Posted by jflogerzi

Did you get the standard Blower?

yes, C30-94

jflogerzi · 05-20-2014, 08:35 PM

Quote:

Originally Posted by glamcem

yes, C30-94

I am debating between this kit and the JRSC The GB really makes it hard.

glamcem · 05-21-2014, 02:55 AM

Quote:

Originally Posted by jflogerzi

I am debating between this kit and the JRSC The GB really makes it hard.

to be perfectly honest even if the price was a bit higher I would still get the KW over the JR for the obvious reasons, with the GB offered by KW it's like a no brainer to me, to each his own, of course

glamcem · 05-21-2014, 01:38 PM

couple pictures I took yesterday

glamcem · 05-23-2014, 01:22 PM

Breather tube catch can installed

found out the popped off house underneath the intake manifold and put clamps on them

glamcem · 05-26-2014, 04:23 PM

the first post has been updated so it now reflects the more up to date information about the camber/coilover settings..

I also received the revised map and car seems to be running even smoother now

I will include a few more photos regarding the updates ..

Simon99 · 05-26-2014, 06:10 PM

Nice build bro !

glamcem · 05-27-2014, 08:09 PM

I took my car to Drift Office today for a dyno session

I am really happy with the results
Ambient temps were about 72F

and compared to stock baseline

King Tut · 05-28-2014, 09:27 AM

Nice horsepower numbers. Would you call that power curve linear?

glamcem · 05-28-2014, 01:32 PM

Quote:

Originally Posted by King Tut

Nice horsepower numbers. Would you call that power curve linear?

thanks, well.. you tell me

glamcem · 06-01-2014, 02:18 PM

another reason to have catch cans

this is after one session at this Friday's event

heat wrapped the intake piping and placed the .5" Boomba racing vacuum check valve (on PCV oil catch can)

yes, I can destroy exhaust gaskets

glamcem · 06-03-2014, 01:32 PM

a few more updates:
gasket on the CBE has been replaced and the new bolts tightened

and below parts are ordered:
Motul V300 5w-30 engine oil [ let's see if it will help reduce the oil temps like people claim

]
Motul 75w-90 Gear lube for diff and transmission
Schroth Rallye 3 ASM Harnesses
Muteki "SR35" Closed End Lugs in Red (w/out locks)

chiefshayan · 06-03-2014, 02:31 PM

What's that gold material called?

glamcem · 06-03-2014, 04:14 PM

Quote:

Originally Posted by chiefshayan

What's that gold material called?

http://www.summitracing.com/parts/dei-010394/overview/

05-21-2014, 01:38 PM	#32
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s)	couple pictures I took yesterday __________________ 2022 BRZ Track Build (A New Chapter) Last edited by glamcem; 06-03-2014 at 01:20 PM.

05-23-2014, 01:22 PM	#33
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s)	Breather tube catch can installed found out the popped off house underneath the intake manifold and put clamps on them __________________ 2022 BRZ Track Build (A New Chapter) Last edited by glamcem; 06-03-2014 at 01:21 PM.

05-26-2014, 04:23 PM	#34
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s)	the first post has been updated so it now reflects the more up to date information about the camber/coilover settings.. I also received the revised map and car seems to be running even smoother now I will include a few more photos regarding the updates .. __________________ 2022 BRZ Track Build (A New Chapter)

05-27-2014, 08:09 PM	#36
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s)	I took my car to Drift Office today for a dyno session I am really happy with the results Ambient temps were about 72F and compared to stock baseline __________________ 2022 BRZ Track Build (A New Chapter) Last edited by glamcem; 06-03-2014 at 01:21 PM.

05-28-2014, 09:27 AM	#37
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s)	Nice horsepower numbers. Would you call that power curve linear? __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

06-01-2014, 02:18 PM	#39
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s)	another reason to have catch cans this is after one session at this Friday's event heat wrapped the intake piping and placed the .5" Boomba racing vacuum check valve (on PCV oil catch can) yes, I can destroy exhaust gaskets __________________ 2022 BRZ Track Build (A New Chapter) Last edited by glamcem; 06-03-2014 at 01:23 PM.

06-03-2014, 01:32 PM	#40
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s)	a few more updates: gasket on the CBE has been replaced and the new bolts tightened and below parts are ordered: Motul V300 5w-30 engine oil [ let's see if it will help reduce the oil temps like people claim ] Motul 75w-90 Gear lube for diff and transmission Schroth Rallye 3 ASM Harnesses Muteki "SR35" Closed End Lugs in Red (w/out locks) __________________ 2022 BRZ Track Build (A New Chapter)

06-03-2014, 02:31 PM	#41
chiefshayan Senior Member Join Date: Mar 2013 Drives: 2013 AT Firestorm FRS Location: Berkeley Posts: 433 Thanks: 185 Thanked 184 Times in 88 Posts Mentioned: 7 Post(s)	What's that gold material called?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Supercharger Comparison: Innovate, Jackson, Kraftwerks, Vortech *Updated March 9 2014	CSG Mike	Forced Induction	281	02-25-2021 04:14 AM
Pneubs HKS Supercharged BRZ Build Thread	Pneub	Member's Car Journals	62	03-30-2016 09:47 AM
Dezoris \| FR-S Build \| Supercharged & More	Dezoris	Member's Car Journals	329	03-21-2016 04:48 PM
Morpheus, Scion dream Build. Supercharged FR-S by TuneCast	scionsalesjay	Member's Car Journals	51	07-07-2014 12:05 PM
Supercharged Rocket Bunny Widebody Conversion Build Thread	RWDRIFT	Member's Car Journals	278	01-06-2014 12:12 AM

User Name		Remember Me?
Password