BRZ Illumination Kit - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ucsmfu · 01-22-2014, 04:44 PM

Quote:

Originally Posted by sousuke86

Comes in blue or red. I had mine installed at the port. I will take pictures of them when I get home. It's literally 1 led on each foot well.

thanks

Kuri · 01-22-2014, 04:45 PM

I had mine done at the dealer during purchase. I looked up the DIY and said screw that..

Sent from my iPhone using Tapatalk

Kuri · 01-22-2014, 04:52 PM

http://stis.subaru.com/proxy/70910/p...H701SCA100.pdf

Sent from my iPhone using Tapatalk

gily25 · 01-24-2014, 12:50 PM

I thought I saw a thread in the electronics section with a member who did illuminated cupholders. I think the same member did the illuminated plaque (seat warmer part of console) and changed the backlight on the other dash buttons to another color.

Anyone know that thread/build?

Diode Dynamics · 01-24-2014, 01:42 PM

If you don't have heated seats we have illuminated acrylic available

Nick C.

EvilGoodGuy · 03-31-2014, 01:40 PM

Does anyone who has installed this kit have any tips for disconnecting the factory harness from the hazard switch panel? Step #7 in the official instructions.
I have been trying to get it disconnected for about 30 minutes now with no luck getting the release tab to actually release it

Marcoscrdo · 03-31-2014, 02:03 PM

but i thought led lights were rice

brybot · 05-31-2014, 12:20 PM

Local parts department just said they're only on when you open the doors. Kinda hoping they would only be on at night or something since they're hooked up to the head unit. Dunno with something silly like this.

illmatic · 05-31-2014, 12:32 PM

Quote:

Originally Posted by brybot

Local parts department just said they're only on when you open the doors. Kinda hoping they would only be on at night or something since they're hooked up to the head unit. Dunno with something silly like this.

The USDM illumination kit is PnP and different from the JDM kit. It lights up when the headlamps are on.

brybot · 05-31-2014, 12:54 PM

Quote:

Originally Posted by illmatic

The USDM illumination kit is PnP and different from the JDM kit. It lights up when the headlamps are on.

That's awesome. Thanks for the quick reply.

VR4Jr · 10-28-2014, 04:12 PM

Quote:

Originally Posted by illmatic

The USDM illumination kit is PnP and different from the JDM kit. It lights up when the headlamps are on.

I'm assuming you mean when the headlamps are on AND the doors are open, correct? I hope they don't come on with the doors closed.

* Sorry to revive this, but the only 2015 I can find with the other options I want also has an illumination kit and I wanted to double check this before driving 200 miles.

tobin · 10-28-2014, 04:25 PM

Quote:

Originally Posted by VR4Jr

I'm assuming you mean when the headlamps are on AND the doors are open, correct? I hope they don't come on with the doors closed.

* Sorry to revive this, but the only 2015 I can find with the other options I want also has an illumination kit and I wanted to double check this before driving 200 miles.

The blue (or red) lights are on whenever the headlights are on. It has nothing to do with the doors. Luckily they can be easily unplugged if you don't like them. I found them both tacky and distracting.

Kuri · 10-29-2014, 12:48 PM

They are attached to parking light and headlight. They can also be dimmed by the dash control. I chose red because I had blue on my WRX last time. Not too bright to be distracting

Slade · 09-06-2015, 12:06 AM

Sorry for bumping an old thread but I searched and couldn't find anything. I have the usdm factory footwell lights in red. Bought the car used with them already installed. They seem to be a really small LED bulb, is it possible to swap this for a blue one? Can anyone tell me what size the bulb is or a link to where I can buy blue? Thanks.

01-24-2014, 01:42 PM	#19
Diode Dynamics Join Date: Aug 2012 Drives: 2013 Scion FR-S Location: St. Louis, Missouri Posts: 2,770 Thanks: 1,503 Thanked 1,761 Times in 877 Posts Mentioned: 197 Post(s) Tagged: 5 Thread(s)	If you don't have heated seats we have illuminated acrylic available Nick C. __________________ John C. Diode Dynamics Follow Us: FB // IG // YT // TikTok

01-24-2014, 12:50 PM	#18
gily25 Senior Member Join Date: Aug 2012 Drives: Silica BRZ 6MT Location: 06103 Posts: 650 Thanks: 97 Thanked 115 Times in 92 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I thought I saw a thread in the electronics section with a member who did illuminated cupholders. I think the same member did the illuminated plaque (seat warmer part of console) and changed the backlight on the other dash buttons to another color. Anyone know that thread/build?

03-31-2014, 01:40 PM	#20
EvilGoodGuy Member Join Date: Mar 2013 Drives: Dark Grey BRZ Limited Location: Tacoma, Washington, USA Posts: 18 Thanks: 0 Thanked 15 Times in 7 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Does anyone who has installed this kit have any tips for disconnecting the factory harness from the hazard switch panel? Step #7 in the official instructions. I have been trying to get it disconnected for about 30 minutes now with no luck getting the release tab to actually release it

09-06-2015, 12:06 AM	#28
Slade Senior Member Join Date: Jan 2015 Drives: 14 Limited BRZ Location: Long Island NY Posts: 144 Thanks: 74 Thanked 27 Times in 21 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sorry for bumping an old thread but I searched and couldn't find anything. I have the usdm factory footwell lights in red. Bought the car used with them already installed. They seem to be a really small LED bulb, is it possible to swap this for a blue one? Can anyone tell me what size the bulb is or a link to where I can buy blue? Thanks.

User Name		Remember Me?
Password