BRZ Ts parts

[Createddeleted]

I believe that's too far of an assumption to make. It's just subaru's take on it.

[Trap63]

Originally Posted by FiRStsc10n

Is this tS sound creator just a new version of the TRD sound tubes?

From the sounds of it, your saying it stops more sound than stock, but isn't a complete block like the Blue TRD tube.

I get red TRD sound creator ON, now waiting for STI (grey).
Blue is closed (sound creator OFF), green is middle and red the most sensitive.
Internal foam is quite different in red and green, in Blue any foam.

[Trap63]

@mister.bond and for all.
These are the right tS stripes each side settings

[mister.bond]

Today i installed my Flexible Tower Bar.

I want to give a new Review about it for all.

So, installling was easy but the Fine Tuning for the 100% correct Position
was not easy for me , as i am a really perfectionist

So after all, i went out for the firt Test Drive.

I am really impressed about the Stiffer Feeling in Hard corners.

The Car is well matched with the Tower Bar cause the lateral rocking

in corners with fast responsively from right turns to left turns

is blown away
The Car just goes there where you want to have it

At least and that is also a big point for All STI Enthusiats
.......the Tower Bar looks Very Smart in Your Engine bay

[Trap63]

Originally Posted by mister.bond

Today i installed my Flexible Tower Bar.

I want to give a new Review about it for all.

So, installling was easy but the Fine Tuning for the 100% correct Position
was not easy for me , as i am a really perfectionist

So after all, i went out for the firt Test Drive.

I am really impressed about the Stiffer Feeling in Hard corners.

The Car is well matched with the Tower Bar cause the lateral rocking

in corners with fast responsively from right turns to left turns

is blown away
The Car just goes there where you want to have it

At least and that is also a big point for All STI Enthusiats
.......the Tower Bar looks Very Smart in Your Engine bay

Yeah! I installed late in last summer. BRZ is more reactive to entering corner and you acquire better feeling on steering wheel. Nextly I'll upgrade with whiteline 22/18 anti-roll bar...

[mister.bond]

i want to continue with the Flexible Draw Stiffener

if my wallet let me order it soon.......

yesterday night i start new small Order with

Radiator Cap and Alcantara Visor.

but i MUST do a japanparts - break ´cause of money

also i just ordered other things here in Germany like Spacers and 300 V Engine Oil

[Trap63]

Originally Posted by mister.bond

i want to continue with the Flexible Draw Stiffener

if my wallet let me order it soon.......

yesterday night i start new small Order with

Radiator Cap and Alcantara Visor.

but i MUST do a break cause of money

just done for cap...waiting for steer STI bushes and Sport Visor.. and grey STI sound resonator tube..despatched yday from Japanparts..and cusco rear support brace for differential...from Japex. I need help from ECB...hoping in Mr Draghi support..

[mister.bond]

So, when i want to have the STI: STEERING GEAR BOX BUSH

i think they are 2 Pieces.

What other things do i need to order for that ????

[Trap63]

Originally Posted by mister.bond

So, when i want to have the STI: STEERING GEAR BOX BUSH

i think they are 2 Pieces.

What other things do i need to order for that ????

You need two bushes (a set), 2 spacers, 2 bolts from Japanparts and two nuts that you can buy in Germany from an official Subaru dealer. Japanparts sells all parts including ordinary nuts #902380003 too.

Therefore:
1. Japanparts Number : 484-001-022
Parts Name : STEERING GEAR BOX BUSH
----------------------------------------
QTY : 1 set (contents LH/RH)

2. Japanparts Number : 484-036-017
Parts Name : 34182D BOLT, STEERING GEAR BOX
----------------------------------------
QTY : 2

3. Japanparts Number : 484-036-018
Parts Name : 34480A SPACER
----------------------------------------
QTY : 2


About a DIY you need the extractor for bushes (not sold as Subaru repair network has this tool) like the Cusco SST. Otherwise you can build by yourself the extractor. Very easy to build as you can see below.

Here Cusco install page http://www.cusco.co.jp/en/parts_prod...lease_ava.html

[mister.bond]

thank you very much

can you please give me all Part numbersfrom Japanparts i need ?

[Trap63]

Originally Posted by mister.bond

thank you very much

can you please give me all Part numbers from Japanparts i need ?

add to mentioned previous part no. this one for nuts (2):

484-036-019
Subaru: N370063 NUTx2

These nuts cost in Europe only Eur 0,89.....each. Japanparts price is Eur 4,69 for the set (2 nuts)....

[mister.bond]

thanks , tomorrow i will ask for the Nuts

perhaps i can get them here

[Trap63]

Originally Posted by mister.bond

thanks , tomorrow i will ask for the Nuts and Bolts and Spacers.

perhaps i can get them here

no...tS parts aren't available, you will find only nuts here in Europe.

Try to verify on www.teile-profis.de

[mister.bond]

Do You think the Recaro STI Ts Seats will be availible soon on japanparts ?