86DRIVE & Mann Engineering's Dyno Day/Car Meet - Santa Clara, May 17 - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Pwolf · 05-18-2014, 12:25 PM

These events are a bit of a drive for me but they never disappoint. Makes the long drive home worth it. Thanks again to Mann Engineering and 86drive for setting up the mines drive and hosting the event (and the food trucks :P).

MyRx · 05-18-2014, 12:32 PM

Quote:

Originally Posted by PMok

Everyone else summed it up nicely -- great meet, fun time hanging out with everyone who came. Great food and icecream from the food trucks! And I was quite pleased with my BRZ's results on the dyno. Big thank you to Gary and Michelle of Mann Engineering for hosting us, and some great raffle/giveaways!

If you'd like to see my BRZ's dyno chart and read a quick summary of the results, please visit the 86DRIVE site:
http://86drive.com/2014/05/18/pmoks-dyno-results/

More photos and video to come! Post up your pics and videos as well!

Your list of mods is minimal at best and yet produces that kind of power - impressed. Also, from what I hear you're kicking ass on the drives, is that from the mods or confidence? I know the dyno can't read "tire/wheel grip" but perhaps you've found a balance of both worlds???

Quote:

Originally Posted by Pwolf

These events are a bit of a drive for me but they never disappoint. Makes the long drive home worth it. Thanks again to Mann Engineering and 86drive for setting up the mines drive and hosting the event (and the food trucks :P).

Haha I know a guy that lives very close to Mann and yet woke up early to get to Livermore and drive with y'all. Your not the first nor the last and you will continue to do so - it's become less of a task and more of a need. And how many people can say 'no thanks' to suffice a need. Thanks for making the trek

Pwolf · 05-18-2014, 12:48 PM

Quote:

Originally Posted by MyRx

Haha I know a guy that lives very close to Mann and yet woke up early to get to Livermore and drive with y'all. Your not the first nor the last and you will continue to do so - it's become less of a task and more of a need. And how many people can say 'no thanks' to suffice a need. Thanks for making the trek

Yea, didn't @mkivsoopra say he lives right around the corner?

sw20kosh · 05-18-2014, 03:43 PM

Great time hanging with you all! My buddy wants to buy an 86 now so he can come to more events with you all. Haha

Thanks for putting this together!

Sypher · 05-18-2014, 10:38 PM

Quote:

Originally Posted by Clipdat

Here's a few snaps. Nice to talk to everyone today. Special thanks to Mann Engineering and 86drive.com for hosting this fun meet!

doooood your camera is awesome! it makes my horribly dirty car look "not so bad" lol (im the ultramarine closest to the pic)

Pwolf · 05-18-2014, 10:44 PM

Quote:

Originally Posted by Sypher

doooood your camera is awesome! it makes my horribly dirty car look "not so bad" lol (im the ultramarine closest to the pic)

Nah, its the car... our color looks good with or without dirt

Clipdat · 05-18-2014, 10:45 PM

Haha, it's just the Galaxy S5 camera. Love that deep blue color!

Quote:

Originally Posted by Sypher

doooood your camera is awesome! it makes my horribly dirty car look "not so bad" lol (im the ultramarine closest to the pic)

PMok · 05-19-2014, 03:37 AM

Quote:

Originally Posted by MyRx

Your list of mods is minimal at best and yet produces that kind of power - impressed. Also, from what I hear you're kicking ass on the drives, is that from the mods or confidence? I know the dyno can't read "tire/wheel grip" but perhaps you've found a balance of both worlds???

In the real world, tires are everything. The right tire will make or break you LOL. All the other mods, are just icing on the cake.

Sent from my iPhone using Tapatalk

BigFatFlip · 05-19-2014, 07:19 AM

Quote:

Originally Posted by PMok

In the real world, tires are everything. The right tire will make or break you LOL. All the other mods, are just icing on the cake.

Sent from my iPhone using Tapatalk

Amen to that brotha! Although I'm sure the E85 helps

PMok · 05-19-2014, 08:45 PM

I made a new video with footage and some of my observations about the dyno session... Check it out!

[ame]http://youtu.be/3iQKa2wfvF0[/ame]

Sent from my iPad using Tapatalk

NorCal_Guy · 05-19-2014, 09:35 PM

@PMok great video!

cactus · 05-20-2014, 03:55 AM

Is the estimated crank power corrected? Is the "corrected" number rwhp or crank? 25%(157.8/210) drivetrain loss seems like a lot, but 5%(20x/210) seems like very little.

RC51ed · 05-20-2014, 11:36 AM

I think the bottom line is wether it's corrected or not corrected. It's about 20hp in gains. Different dyno's always have different numbers. Which we all know... Even before these mods. Plato was a hard target to keep up with...😱😦😧😯

PMok · 05-20-2014, 01:24 PM

Quote:

Originally Posted by cactus

Is the estimated crank power corrected? Is the "corrected" number rwhp or crank? 25%(157.8/210) drivetrain loss seems like a lot, but 5%(20x/210) seems like very little.

I'm not entirely sure how the corrected numbers are derived. So for my purposes I only look at the WHP number and how that compares in relation to other cars that ran on that same dyno... But I will ask Gary for more explanation as well.

Sent from my iPad using Tapatalk

05-18-2014, 12:25 PM	#43
Pwolf Senior Member Join Date: Sep 2013 Drives: 2013 GBS BRZ Limited Location: Sacramento Posts: 1,321 Thanks: 1,979 Thanked 1,380 Times in 560 Posts Mentioned: 120 Post(s) Tagged: 2 Thread(s)	These events are a bit of a drive for me but they never disappoint. Makes the long drive home worth it. Thanks again to Mann Engineering and 86drive for setting up the mines drive and hosting the event (and the food trucks :P). __________________ The Burz

05-19-2014, 08:45 PM	#52
PMok Codename: Stitch Join Date: Apr 2012 Drives: 91 MR2; 06 IS350; 16 BRZ; 18 CX-5 Location: Hayward/NorCal Posts: 5,248 Thanks: 4,021 Thanked 5,436 Times in 2,307 Posts Mentioned: 462 Post(s) Tagged: 6 Thread(s)	I made a new video with footage and some of my observations about the dyno session... Check it out! [ame]http://youtu.be/3iQKa2wfvF0[/ame] Sent from my iPad using Tapatalk __________________ 86DRIVE Events Calendar

05-20-2014, 11:36 AM	#55
RC51ed Senior Member Join Date: Apr 2013 Drives: 2013 Scion FRS Location: Eastbay Area Posts: 708 Thanks: 495 Thanked 335 Times in 207 Posts Mentioned: 64 Post(s) Tagged: 0 Thread(s)	I think the bottom line is wether it's corrected or not corrected. It's about 20hp in gains. Different dyno's always have different numbers. Which we all know... Even before these mods. Plato was a hard target to keep up with...😱😦😧😯 __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pit Row in Santa Clara is the bees knees!	MagicBobert	Northern California	15	04-27-2014 10:21 PM
Mann Engineering Coilovers	BigFatFlip	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	17	04-21-2014 09:48 AM
Mann Engineering Coilovers review	l8apexr	CANADA	10	03-11-2014 01:11 PM
Delicious Tuning - Dyno Tuning Weekend at Mann Engineering's (San Jose, CA)	DeliciousTuning	Announcements, Contests, Giveaways	6	09-19-2013 06:55 PM
Freed Engineering Open House/Dyno meet June 1st	FreedE	Mid-Atlantic	3	05-30-2013 12:43 PM

05-18-2014, 03:43 PM	#46
sw20kosh Senior Member Join Date: Jul 2012 Drives: 2013 Black FR-S Location: SF Posts: 3,030 Thanks: 881 Thanked 2,014 Times in 990 Posts Mentioned: 153 Post(s) Tagged: 1 Thread(s)	Great time hanging with you all! My buddy wants to buy an 86 now so he can come to more events with you all. Haha Thanks for putting this together!

05-19-2014, 09:35 PM	#53
NorCal_Guy It's turbo time! Join Date: May 2013 Drives: 2013 Scion FRS Location: Nor Cal Posts: 1,246 Thanks: 615 Thanked 216 Times in 164 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	@PMok great video!

05-20-2014, 03:55 AM	#54
cactus Senior Member Join Date: Sep 2013 Drives: 13 SWP BRZ Location: CA Posts: 183 Thanks: 118 Thanked 44 Times in 36 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Is the estimated crank power corrected? Is the "corrected" number rwhp or crank? 25%(157.8/210) drivetrain loss seems like a lot, but 5%(20x/210) seems like very little.

User Name		Remember Me?
Password