Brakes for Street use?

[dad&sonFRS]

My oem pads need to be replaced, and was wondering what pads would be good for street use with spirited driving. I'd prefer low dust and noise pads, but also a bit better than the oem pads. Thanks in advance

[AdrianG]

Winmax W2 is my recommendation.

- AdrianG

[OICU812]

PMU NS400.

Counter Space Garage sells them, excellent & no noise.

[RB Performance Brakes]

Try our ET300 performance street brake pads.
Delivers braking performance beyond stock pads, yet with minimal dust and no squeaking

http://www.racingbrake.com/Brake-Pad...d929-33-03.htm

[CSG Mike]

Winmax W1 is actually what I'd recommend for your use.
@RB Performance Brakes: You guys are in Fullerton???? Why did I not know this?

[RB Performance Brakes]

Originally Posted by CSG Mike

Winmax W1 is actually what I'd recommend for your use.
@RB Performance Brakes: You guys are in Fullerton???? Why did I not know this?

Yes,
Right off the 55 and 91!

[Brahsbrah]

In for answers.... Too many suggestions! :P

[CSG David]

Originally Posted by Brahsbrah

In for answers.... Too many suggestions! :P

It's fairly dependent on what you're looking for? People who want that OE replacement with additional bite, heat capacity, modulation, and fade resistance, we recommend Winmax W1. For a little more of that, go to W2. Everything after W2, the amount of noise you can potentially get increases. For pure daily setup, we recommend the W1. It can handle some spirited use if you need to as well.

[Brahsbrah]

Originally Posted by CSG David

It's fairly dependent on what you're looking for? People who want that OE replacement with additional bite, heat capacity, modulation, and fade resistance, we recommend Winmax W1. For a little more of that, go to W2. Everything after W2, the amount of noise you can potentially get increases. For pure daily setup, we recommend the W1. It can handle some spirited use if you need to as well.

Thanks!

How do they compare to Hawk HP+? North of the wall we have limited retailers

[CSG David]

Originally Posted by Brahsbrah

Thanks!

How do they compare to Hawk HP+? North of the wall we have limited retailers

While HP+ compound works well, it's kind of in the similar category as a ~W2/W3, DS2500, B-Force, and AX6.

The manufacturing quality is different across the different brands and the Hawk dust is notoriously corrosive compared to the other listed 4 pads. The upside of the HP+ is that it actually works pretty well for what it is.