My Review of RCE Tarmac II Coilovers

[SupraFly85]

Originally Posted by ja1217

The data was collected with an Aim Solo DL. The software for the overlay was Race Render 3.

More seat time of any kind is really valuable. I'd recommend practising your car control without traction control on in autocross first, as its pretty hard to screw up in a way that will hurt you or the car. I did about a year of autocross before I brought my car to the track and am glad I did so. Just remember to be smooth when going back to the track. The quick inputs you can use at 40mph in autocross can easily upset your car going 90-100mph.

Ah ok thanks. Yea that's the plan. I want to start attending as many autocross events as I can and practice there, then hopefully make it back to Summit Point at least once before the end if the season. Won't be able to make hyperfest though.

[Racecomp Engineering]

Originally Posted by cjsporl1996

whats the difference between the tarmac 2 and the kw club sport.

Where can i get camber plates for the tarmac 2?

We sell camber plates to pacakge with the T2s, as do most or all of the vendors that sell our T2s. RCE, Raceseng, HVT, Vorshlag, are all popular plates to use with the T2s.

I answered in your other thread on differences between the 2.

- Andy

[Racecomp Engineering]

Originally Posted by SupraFly85

Ah ok thanks. Yea that's the plan. I want to start attending as many autocross events as I can and practice there, then hopefully make it back to Summit Point at least once before the end if the season. Won't be able to make hyperfest though.

You should go to boxerfest this weekend.

- Andy

[SupraFly85]

Originally Posted by Racecomp Engineering

You should go to boxerfest this weekend.

- Andy

Would like to, may have to get something fixed before I can do any more racing, trying to get it fixed asap but not sure the car will be ready by this weekend.

[Racecomp Engineering]

Originally Posted by SupraFly85

Would like to, may have to get something fixed before I can do any more racing, trying to get it fixed asap but not sure the car will be ready by this weekend.

Gotcha.

- Andy

[BRZ NA]

How much camber r u running?thx

[SupraFly85]

Originally Posted by BRZ NA

How much camber r u running?thx

I believe right around 1.2 up front and 1.7 on rear, not full track setting but a little more aggressive then standard street setup. I will probably dial a little more on one of my next track days