Brembo GT Kit Fitment on Enkei Wheels

[Parikh1234]

So I did a search and wasnt sure if the Enkei RC-T4 17x8 + 48 would fit the brembo 6 piston front / 4 pistol rear GT kit.

Here are the wheels I want to use:

http://www.rallispec.com/whe_whe_rct17.html

Along with the following Brake Kit model numbers:

Front 6-Piston Monobloc Kit: 1M1.8025A2
Rear 4-Piston Monobloc Kit: 2P1.6006A2

Thanks!

[JerryMichaels7]

bling bling parts... Essex ap kits performs just as good and at a way cheaper price and those part numbers are lancer brakes

[Parikh1234]

Originally Posted by JerryMichaels7

bling bling parts... Essex ap kits performs just as good and at a way cheaper price and those part numbers are lancer brakes

Yeah sorry I am building a couple of cars and I copied and pasted the wrong part numbers.

1M1.8047A front 6 piston
2P1.8042A rear 4 piston

Also the AP kits are probably not cheaper than the deal I have with Brembo for my cars. Thanks for the recommendation though!

[dradernh]

Originally Posted by Parikh1234

So I did a search and wasnt sure if the Enkei RC-T4 17x8 + 48 would fit the brembo 6 piston front / 4 pistol rear GT kit.

Quick rule of thumb:

Rotor Diameter + 4" = Required Wheel Diameter

I think you're going to need 18" wheels to fit those kits.

To know whether or not a kit will fit a given wheel, someone needs to get the wheel fitment template for the kit, and then fit it to the wheel. Then you will know for sure.

[Parikh1234]

Originally Posted by dradernh

Quick rule of thumb:

Rotor Diameter + 4" = Required Wheel Diameter

I think you're going to need 18" wheels to fit those kits.

To know whether or not a kit will fit a given wheel, someone needs to get the wheel fitment template for the kit, and then fit it to the wheel. Then you will know for sure.

Thanks! I am trying to get the template for the kit but the Wheels are special order so it would suck to get the 17" wheels and then not have it fit.

[dradernh]

Originally Posted by Parikh1234

Thanks! I am trying to get the template for the kit but the Wheels are special order so it would suck to get the 17" wheels and then not have it fit.

There's a link for the front kit's template in the first post of this thread:

http://www.ft86club.com/forums/showthread.php?t=3440

This template for Essex Parts' Sprint Kit has instructions:

[Parikh1234]

so i think the 4 piston fronts will fit with 15 mm spacers. I will know very soon:

http://www.ft86club.com/forums/showt...94#post1850994