WHAT DID YOU DO TO YOUR BRZ TODAY?

[BRZNutt]

Originally Posted by Frank5364

Okay im planing on getting valenti tails but honestly i want opinion on clear red or smoked red....... Opinion would help a lot. Btw i have a satin white brz. Thanks!

Red or clear Tom's would be my #1 and 2 votes. Red Valenti's if you really like them. I personally don't, but I am 51. I don't like smoked anything, which is crazy because I had smoke tinted headlight covers on my '76 Firebird...

[subiestyle]

Originally Posted by JPxM0Dz

http://www.gtspec.com/content/gtspec...r-s-gt86-ft-86

You feel a difference with this? Less vibration or more harsh ride?

[Myv]

Originally Posted by Frank5364

Okay im planing on getting valenti tails but honestly i want opinion on clear red or smoked red....... Opinion would help a lot. Btw i have a satin white brz. Thanks!

Your choice should be red or clear

I love both, I would have an issue figuring out which to choose too I lean towards clear more for the valentis on SWP, because of the really clean look. If it was the TOM's I'd go red.

[ikkomaji22]

Painted my wheels today color matched to car. Awaiting Rota center caps in black and red

[Simon99]

Originally Posted by ikkomaji22

Painted my wheels today color matched to car. Awaiting Rota center caps in black and red

Sick car, what exhaust is that ?

Sent from my SGH-I337M using Tapatalk

[dbrandt01]

Can finally say I took driving pictures of my car. I drove the Corvette. My father drove my car. Not bad for first time attempt of pictures like this.

[JPxM0Dz]

Originally Posted by subiestyle

You feel a difference with this? Less vibration or more harsh ride?

Absolutely no difference like most of the mods I've done on my BRZ

[chanomatik]

My MB Quart PVwhatever component door speakers ripped, so I had them replaced with Infinity Primus PR6500cs components. Ermagherd, the sound is SO beautiful! I put my stock unit back in since I wasn't as impressed with the AVH-P8400BH as I thought I'd be. Plus I HATE that Toyota's DIN is 200mm. Almost impossible to find a good HU. I want a Pioneer one that fits. I don't like brackets since they make the dash look tacky.

There was corrosion found on the old door speakers' wire terminals due to so much moisture being in the doors. Probably a combo of the freezing and thawing of Alaska, plus I wash my car multiple times a week.

[Velutha]

I finally slapped my plates on. I may shift the plate over towards center a little bit after I see how it is at night.

[ikkomaji22]

Originally Posted by Simon99

Sick car, what exhaust is that ?

Sent from my SGH-I337M using Tapatalk

Thanks man it's the invidia q300 "most" people don't like it because it sounds too much like stock. Next thing imma get is the sti gurney flap and eventually the sti lip skirt and spats

[Simon99]

Originally Posted by ikkomaji22

Thanks man it's the invidia q300 "most" people don't like it because it sounds too much like stock. Next thing imma get is the sti gurney flap and eventually the sti lip skirt and spats

I actually want the Ti Q300 :o How would you compare noise versu stock ? And do you think about adding a front pipe or is it fine as-is ?

And get the Bayson R replicas ! Perfect fitments on front/rear lips (little problems with side as they are too long) and you can have them all by the end of this week !


Sent from my SGH-I337M using Tapatalk

[franchize]

Went with the lexons, glad speedelement is local



Sent from my Nexus 5 using Tapatalk

[ikkomaji22]

Originally Posted by Simon99

I actually want the Ti Q300 :o How would you compare noise versu stock ? And do you think about adding a front pipe or is it fine as-is ?

And get the Bayson R replicas ! Perfect fitments on front/rear lips (little problems with side as they are too long) and you can have them all by the end of this week !


Sent from my SGH-I337M using Tapatalk

The initial start up has a nice low rumble to it and after about 4k rpm is really when you hear the exhaust.. But mostly cause there's no droning while just cruising. As far as adding a front pipe not sure kinda happy with the exhaust as it don't want to attract too much attention.

Yeah I saw the replicas definitely considering them

[MykeH78]

Plasti'd some interior parts, plasti n paint on some others.

Apparently I'm not going to be putting any pics of this up. Computer being stupid.