3" Overpipe

[protpibe]

Does anyone know of a 3" overpipe that will taper down on the header side and bolt on to an OEM flange?

[FR-S Matt]

JDL, but I don't think you want to hook up a 3" overpipe to a stock header. Probably will leak like crazy.

[protpibe]

Originally Posted by FR-S Matt

JDL, but I don't think you want to hook up a 3" overpipe to a stock header. Probably will leak like crazy.

It's bolting on to an AVO downpipe that has a stock flange location and size.

I want a 3" overpipe that tapers down to a stock sized flange, unless there's no benefit in doing that? The rest of the exhaust is 3"

[Sportsguy83]

Originally Posted by protpibe

It's bolting on to an AVO downpipe that has a stock flange location and size.

I want a 3" overpipe that tapers down to a stock sized flange, unless there's no benefit in doing that? The rest of the exhaust is 3"

I had Nameless 3" OP/DP bolted to AVO turbo downpipe.

[TIE Pilot]

Nameless 3" Downpipe, replaces overpipe and frontpipe which i guess it will reduce options to leak. Some vendors might also have in stock a Perrin 3" downpipe.

[protpibe]

Thanks for the info

I already have a 3" catted front pipe. I'm looking for a stand alone 3" overpipe with a tapered down flange at the header side

I'm assuming nobody makes it, because it's a bit of an oddball.

My life would of been 100x easier if the AVO 3" downpipe and 3" overpipe kept the stock flange locations.

[Sportsguy83]

Originally Posted by protpibe

Thanks for the info

I already have a 3" catted front pipe. I'm looking for a stand alone 3" overpipe with a tapered down flange at the header side

I'm assuming nobody makes it, because it's a bit of an oddball.

My life would of been 100x easier if the AVO 3" downpipe and 3" overpipe kept the stock flange locations.

Get a custom OP fabbed at a reputable local muffler shop.