ECUFlash - Getting close! - Page 45 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

vgi · 04-07-2014, 07:30 PM

Quote:

Originally Posted by Td-d

Tinywrex was the first to provide a patch, NSFW then coded it up from scratch and posted up the source on the RR forums, this was then incorporated into Merp's work. Not sure where the OFT code comes from, but it's really quite a simple piece of code, not difficult to code up in C.

Got it. I knew there had to be an open source code for that but didn't spot it on RR forums. So what else merpmod has besides ffs/lc and sd?

Td-d · 04-07-2014, 07:42 PM

Plenty - cel flash on knock, cel flash on high EGT (using o2 sensor resistance), speed density with MAF blending, FFS with per gear thresholds, LC, per gear boost control. I'm sure I'm forgetting stuff...

Sent from my iPad using Tapatalk HD

D-VO · 04-13-2014, 01:38 PM

Regarding the "base timing a" and "base timing b" tables. I've been missing around with different settings trying to figure out the difference, and it looks like "base timing b" is used only when vcs sport is on is that correct? I wanted to relabel the tables so I won't forget.

Kodename47 · 04-13-2014, 01:49 PM

AFAIK Base A is VVT disabled, B is normal operation.

D-VO · 04-13-2014, 02:04 PM

Quote:

Originally Posted by Kodename47

AFAIK Base A is VVT disabled, B is normal operation.

Does that mean that VVT is disabled when the VSC sport is off? On the dyno graphs I'm noticing a 40hp difference when vsc is on or off.

*EDIT* Timing was too low on first pull. Just happened that my VSC was off and I didn't think 2 degrees of timing would make so much difference.

Kodename47 · 04-13-2014, 02:18 PM

No, VSC should have no impact on the tables at all and doesn't have an impact on performance. All the VSC does is allow for less interruption from the traction control. Are you talking about the AT or MT?

D-VO · 04-13-2014, 02:29 PM

I have an MT. Maybe there's another variable that I'm missing.

Wepeel · 04-15-2014, 06:31 PM

Anyone know if there anything like Learning View in the works for this platform? Loved that feature for my '08 STI but I know that capability wasn't available after MY '11 (I think)...

vgi · 04-15-2014, 07:08 PM

Quote:

Originally Posted by Wepeel

Anyone know if there anything like Learning View in the works for this platform? Loved that feature for my '08 STI but I know that capability wasn't available after MY '11 (I think)...

Not as far as I know. You should ask developer of LV on RR forum if he plans to do a new release.

qoncept · 04-16-2014, 03:01 PM

Quote:

Originally Posted by vgi

Not as far as I know. You should ask developer of LV on RR forum if he plans to do a new release.

merchgod wrote Learning View and he works for Cobb now.

vgi · 04-16-2014, 03:34 PM

Quote:

Originally Posted by qoncept

merchgod wrote Learning View and he works for Cobb now.

yep, i just couldn't remember the nick from the top of my head.

he wrote a LOT of good staff.

the problem is that most of those free proggies aren't open source. so when they move on with their lives their proggies die off.

regal · 04-16-2014, 04:16 PM

I hope there is room for a few remedial questions but after 2 years I am very close to updated to the latest factory calib. My back up car is alost back together so in case something goes wrong no worries. My e-tuning stopped with hondata a decade ago.

What I have:

1. Tatrix cable cable.
2. ecuflash_brz_beta_1444040b.exe
3. Td-d's def file ZA1IB01C.xlm (don't think I need this as my goal is just to upgrade factory calib.)
4. 2013ZA1JB01C.bin
5. 2013ZA1JB01C.hex
6. Aspire One Laptop dual boots Win XP/Win 7x64 (USB 2.0)

I imagine I want to install all this on the WinXP partition? And do I need both the hex and bin file on the laptop? Any drivers I need (this is SP3?)

Thanks for the time/thread.

steve99 · 04-16-2014, 06:35 PM

Quote:

Originally Posted by regal

I hope there is room for a few remedial questions but after 2 years I am very close to updated to the latest factory calib. My back up car is alost back together so in case something goes wrong no worries. My e-tuning stopped with hondata a decade ago.

What I have:

1. Tatrix cable cable.
2. ecuflash_brz_beta_1444040b.exe
3. Td-d's def file ZA1IB01C.xlm (don't think I need this as my goal is just to upgrade factory calib.)
4. 2013ZA1JB01C.bin
5. 2013ZA1JB01C.hex
6. Aspire One Laptop dual boots Win XP/Win 7x64 (USB 2.0)

I imagine I want to install all this on the WinXP partition? And do I need both the hex and bin file on the laptop? Any drivers I need (this is SP3?)

Thanks for the time/thread.

Any rom you want to write you will need a definition. You can read without one.

Did a write up on this forum in another thread TACTRIX INFO FOR ECUFLASH..... see first post. else wise you look good to go.

regal · 04-16-2014, 06:51 PM

Thank you I completely missed that thread.

04-13-2014, 01:38 PM	#619
D-VO Senior Member Join Date: Sep 2012 Drives: Whiteout FR-S, Evo 8 RS Location: Kissimmee FL. Posts: 242 Thanks: 131 Thanked 42 Times in 32 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Regarding the "base timing a" and "base timing b" tables. I've been missing around with different settings trying to figure out the difference, and it looks like "base timing b" is used only when vcs sport is on is that correct? I wanted to relabel the tables so I won't forget. __________________

04-13-2014, 01:49 PM	#620
Kodename47 Senior Member Join Date: Oct 2012 Drives: UK GT86 Location: UK Posts: 3,040 Thanks: 185 Thanked 1,633 Times in 1,113 Posts Mentioned: 156 Post(s) Tagged: 1 Thread(s)	AFAIK Base A is VVT disabled, B is normal operation. __________________ .: Stealth 86 :. Abbey Motorsport/K47 Tuned Sprintex 210 Supercharger Kodename 47 DJ: Soundcloud / Instagram / Facebook

04-13-2014, 02:18 PM	#622
Kodename47 Senior Member Join Date: Oct 2012 Drives: UK GT86 Location: UK Posts: 3,040 Thanks: 185 Thanked 1,633 Times in 1,113 Posts Mentioned: 156 Post(s) Tagged: 1 Thread(s)	No, VSC should have no impact on the tables at all and doesn't have an impact on performance. All the VSC does is allow for less interruption from the traction control. Are you talking about the AT or MT? __________________ .: Stealth 86 :. Abbey Motorsport/K47 Tuned Sprintex 210 Supercharger Kodename 47 DJ: Soundcloud / Instagram / Facebook

04-13-2014, 02:29 PM	#623
D-VO Senior Member Join Date: Sep 2012 Drives: Whiteout FR-S, Evo 8 RS Location: Kissimmee FL. Posts: 242 Thanks: 131 Thanked 42 Times in 32 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	I have an MT. Maybe there's another variable that I'm missing. __________________

04-16-2014, 04:16 PM	#628
regal Senior Member Join Date: Jun 2012 Drives: Scion FR-S/Toyota Yaris Location: PA Posts: 1,438 Thanks: 21 Thanked 316 Times in 232 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	I hope there is room for a few remedial questions but after 2 years I am very close to updated to the latest factory calib. My back up car is alost back together so in case something goes wrong no worries. My e-tuning stopped with hondata a decade ago. What I have: 1. Tatrix cable cable. 2. ecuflash_brz_beta_1444040b.exe 3. Td-d's def file ZA1IB01C.xlm (don't think I need this as my goal is just to upgrade factory calib.) 4. 2013ZA1JB01C.bin 5. 2013ZA1JB01C.hex 6. Aspire One Laptop dual boots Win XP/Win 7x64 (USB 2.0) I imagine I want to install all this on the WinXP partition? And do I need both the hex and bin file on the laptop? Any drivers I need (this is SP3?) Thanks for the time/thread. __________________ 2013 FRS Argento Silver 6MT Mods: Clear fender side lights Tactrix ZA1JB01C 2014 Calib

04-07-2014, 07:42 PM	#618
Td-d Garden variety obsessive Join Date: Oct 2013 Drives: 2009 Sti Hatch; 2015 Audi RSQ3 Location: South Africa Posts: 532 Thanks: 54 Thanked 448 Times in 245 Posts Mentioned: 74 Post(s) Tagged: 2 Thread(s)	Plenty - cel flash on knock, cel flash on high EGT (using o2 sensor resistance), speed density with MAF blending, FFS with per gear thresholds, LC, per gear boost control. I'm sure I'm forgetting stuff... Sent from my iPad using Tapatalk HD

04-15-2014, 06:31 PM	#624
Wepeel Senior Member Join Date: May 2012 Drives: '13 BRZ Ltd Location: PA Posts: 458 Thanks: 265 Thanked 230 Times in 117 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Anyone know if there anything like Learning View in the works for this platform? Loved that feature for my '08 STI but I know that capability wasn't available after MY '11 (I think)...

04-16-2014, 06:51 PM	#630
regal Senior Member Join Date: Jun 2012 Drives: Scion FR-S/Toyota Yaris Location: PA Posts: 1,438 Thanks: 21 Thanked 316 Times in 232 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	Thank you I completely missed that thread. __________________ 2013 FRS Argento Silver 6MT Mods: Clear fender side lights Tactrix ZA1JB01C 2014 Calib

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Close	iJason	Member's Car Journals	1	08-04-2013 09:26 PM
Close	pche	Engine, Exhaust, Bolt-Ons	3	08-04-2013 03:04 AM
Sorry. please close.	finch1750	Scion FR-S / Toyota 86 GT86 General Forum	1	07-31-2013 02:00 AM
please close	abutterman	Wheels and Tires	0	07-05-2013 10:40 AM

User Name		Remember Me?
Password