Wheel Directory: Gram Lights 57DR 17x9.0 +38 - Page 12 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

StormMcCloud · 04-15-2014, 12:27 PM

Anyone that is running a set of Gram Lights 57DR 17x9 +38 wheels know what size hub-centric rings I need to pick up for them?

No Limit Motorsport · 04-15-2014, 01:04 PM

Quote:

Originally Posted by StormMcCloud

Anyone that is running a set of Gram Lights 57DR 17x9 +38 wheels know what size hub-centric rings I need to pick up for them?

65mm OD / 56.1mm ID

This is true for all Rays/Gram Lights/Volk 5x100 wheels.

gabeg86 · 04-15-2014, 02:29 PM

Quote:

Originally Posted by shehan1212

are those 18ns or 17?

they're 17's

Quote:

Originally Posted by shehan1212

i am about to join the 57dr club

17x9 +38 matte black. i already have Tein S tech springs. car should look fine after the wheel setup i guess. I think I'm gonna go with 245/40/17. as i have seen from you guys this combination gives you that right amount of side wall. cz race car lol

good choice on tire size

that's what i'm running and i think they're perfect

theEZV · 04-16-2014, 05:49 PM

I need a set of these as well for my 57Dr's, there are a few vendors that carry them, but they are pricey.

There are a lot of cheap 66mm/56.1mm cheap rings out there, maybe those will squeeze in there with some effort

Yamajee · 04-16-2014, 06:01 PM

Used a set for my CE28's, 56.1mm is the hub bore size for the scion fr-s/gt86.

trueno86power · 10-18-2014, 09:36 PM

Sorry for bringing a old thread to life but got a question for 57DR owner.

I've just got a set without centercap and I'm wondering if the Rays center cap are heat resistant... I will track my car and I don't want to melt 130$ of centercap!

Tabalife654 · 05-29-2015, 02:08 AM

Quote:

Originally Posted by Eric1855

Gram Lights 57DR 17x9 +38 Semigloss Black

Ground Control full coilover kit and 245/40/17 Dunlop ZIIs. No rubbing issues at all.

Thanks to NoLimitMotorsports for the great deal!

Meaty!

Sexy setup! Makes me wanna go for 17s and not 18s anymore! Do your remember the height adjustments you had for the front and rear and camber? I'm not sure if you even have this setup anymore since you posted it in 2013

cortrain · 05-30-2015, 06:37 PM

Quote:

Originally Posted by trueno86power

Sorry for bringing a old thread to life but got a question for 57DR owner.

I've just got a set without centercap and I'm wondering if the Rays center cap are heat resistant... I will track my car and I don't want to melt 130$ of centercap!

To be safe just take them out once you get to the track. I've had lots of friends lose center caps haha and at the priced Rays charges.. I wouldn't wanna lose them :p

wheelsun · 09-17-2016, 02:26 AM

Just arrived and mounted earlier today.. WRB BRZ with 57DR 17x9 +38 in Gun Blue wrapped in Hankook V12 Evo2 245/40/17 tires

Sorry for the crappy cell phone pictures, took them while getting gas. Will have more proper pictures later!

novice · 11-25-2016, 10:07 PM

Quote:

Originally Posted by wheelsun

Just arrived and mounted earlier today.. WRB BRZ with 57DR 17x9 +38 in Gun Blue wrapped in Hankook V12 Evo2 245/40/17 tires

Sorry for the crappy cell phone pictures, took them while getting gas. Will have more proper pictures later!

nice! what's your suspension situation? springs, stock or coils?

DarkSideFRS · 12-29-2017, 04:07 PM

couple questions for ppl running this setup...

1. Do you need hubcentric rings?
2. for those dropped 1" on springs, running 245/40 tires and run significant camber (I am at -1.7), will you hit the spring perch? I know it is very close, but a lot of posts I see saying that it will fit with no rubbing does not specify the amount of camber they are running.

PERRIN_Chris · 12-29-2017, 04:21 PM

Yes, you will need hubcentric rings.

I ran 18 X 9.5 +38 with 245/40 18 and I didn't rub at all in the front when my car was lowered .75" on drop springs. But I was not running camber bolts, just natural camber from lowering. I think with 17 X 9 + 38 with 245s, you will have plenty of room.

DarkSideFRS · 12-29-2017, 04:25 PM

Quote:

Originally Posted by PERRIN_Chris

Yes, you will need hubcentric rings.

I ran 18 X 9.5 +38 with 245/40 18 and I didn't rub at all in the front when my car was lowered .75" on drop springs. But I was not running camber bolts, just natural camber from lowering. I think with 17 X 9 + 38 with 245s, you will have plenty of room.

thanks! one post I read said that he was able to slide a cardboard between the perch and rims, but did not state how much camber he was running.

do u know which hubcentric ring I can buy?

jubella2 · 12-29-2017, 04:57 PM

I bought my rings from Counterspace Garage

04-15-2014, 12:27 PM	#155
StormMcCloud Southeast 86 Club Join Date: Sep 2013 Drives: 2013 Scion FR-S Location: Atlanta, Ga Posts: 54 Thanks: 34 Thanked 31 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hub centric rings for Gram Lights 57DR Anyone that is running a set of Gram Lights 57DR 17x9 +38 wheels know what size hub-centric rings I need to pick up for them? Last edited by StormMcCloud; 04-15-2014 at 12:38 PM.

10-18-2014, 09:36 PM	#160
trueno86power [\|\|•]=(86)=[•\|\|] Join Date: Jan 2010 Drives: 2017 Toyota 86 Location: Quebec Posts: 963 Thanks: 173 Thanked 489 Times in 218 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Sorry for bringing a old thread to life but got a question for 57DR owner. I've just got a set without centercap and I'm wondering if the Rays center cap are heat resistant... I will track my car and I don't want to melt 130$ of centercap! __________________ trueno86power GR \| TOM'S \| TRD 2017 Toyota 86

09-17-2016, 02:26 AM	#163
wheelsun Member Join Date: Feb 2015 Drives: 2015 WRB BRZ Location: CA Posts: 93 Thanks: 24 Thanked 35 Times in 18 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Just arrived and mounted earlier today.. WRB BRZ with 57DR 17x9 +38 in Gun Blue wrapped in Hankook V12 Evo2 245/40/17 tires Sorry for the crappy cell phone pictures, took them while getting gas. Will have more proper pictures later! Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Gram Lights 57Xtremes 18x8.5 +45/18x9.5 +40	WorkoArt	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	18	02-18-2017 07:46 PM
Wheel Directory: Gram Lights 57Xtreme 19x9.5 +43	RavSpec	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	31	12-04-2014 11:56 PM
Gram Lights 57DR - 17x9+38 in Gun Blue	00vsmcoupe	Wheels and Tires	17	01-08-2014 09:02 AM
WTB Gram Lights 57DR 17x9 +38 in Gun Blue or Enkei RPF1 18x9.5 +38 in SBC	Shiro86	Want-To-Buy Requests	2	11-08-2013 11:18 AM

04-16-2014, 05:49 PM	#158
theEZV Junior Member Join Date: Apr 2014 Drives: 2013 WRX Location: Germantown, MD Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I need a set of these as well for my 57Dr's, there are a few vendors that carry them, but they are pricey. There are a lot of cheap 66mm/56.1mm cheap rings out there, maybe those will squeeze in there with some effort

04-16-2014, 06:01 PM	#159
Yamajee Senior Member Join Date: May 2013 Drives: Rocket Bunny'd GT86 Location: Dubai Posts: 556 Thanks: 68 Thanked 144 Times in 100 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Used a set for my CE28's, 56.1mm is the hub bore size for the scion fr-s/gt86.

12-29-2017, 04:07 PM	#165
DarkSideFRS Banned Join Date: Apr 2017 Drives: 2013 pearl white FR-S Location: Socal Posts: 536 Thanks: 39 Thanked 191 Times in 124 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	couple questions for ppl running this setup... 1. Do you need hubcentric rings? 2. for those dropped 1" on springs, running 245/40 tires and run significant camber (I am at -1.7), will you hit the spring perch? I know it is very close, but a lot of posts I see saying that it will fit with no rubbing does not specify the amount of camber they are running.

12-29-2017, 04:57 PM	#168
jubella2 Senior Member Join Date: Oct 2016 Drives: DGM BRZ Location: MN Posts: 176 Thanks: 126 Thanked 78 Times in 60 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I bought my rings from Counterspace Garage

User Name		Remember Me?
Password