P087 Code and Car Dies, EcuTek Tuned, FI---Help! - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jamesm · 04-02-2014, 12:36 AM

glad to see everything worked out. i'm sure that was your problem if it only had the 2 o-rings and no spacer installed. should be good to go now!

Sportsguy83 · 04-02-2014, 11:44 AM

Quote:

Originally Posted by jamesm

glad to see everything worked out. i'm sure that was your problem if it only had the 2 o-rings and no spacer installed. should be good to go now!

Yea, that was a brainfart on DW initial instructions, which I had specifically called on the phone and they told me, only 2 O rings and no white spacer. I created the thread explaining all details on FP installation, and they contacted me here via PM asking for my feedback.

Their instructions now call for three 0 rings IIRC.

But the white spacer and 2 O rings will be good enough.

jamesm · 04-02-2014, 11:53 AM

Quote:

Originally Posted by Sportsguy83

Yea, that was a brainfart on DW initial instructions, which I had specifically called on the phone and they told me, only 2 O rings and no white spacer. I created the thread explaining all details on FP installation, and they contacted me here via PM asking for my feedback.

Their instructions now call for three 0 rings IIRC.

But the white spacer and 2 O rings will be good enough.

i use 4 o-rings and that also works fine. i've never tried it with 3.

Sportsguy83 · 04-02-2014, 11:54 AM

Quote:

Originally Posted by jamesm

i use 4 o-rings and that also works fine. i've never tried it with 3.

I have it installed with 4 too. didn't try 3 either.

Sent from my SM-N900A using Tapatalk

xjohnx · 04-02-2014, 12:20 PM

Quote:

Originally Posted by jamesm

i use 4 o-rings and that also works fine. i've never tried it with 3.

4 here. I think the pump Visconti sold uses 3.

King Tut · 04-02-2014, 03:05 PM

I use 9,001 O rings when I install fuel pumps now.

kmbkk · 04-05-2014, 10:53 PM

Well, after a couple of days of quite a bit of stop and go traffic I'm happy to report I haven't gotten the code nor has my car stalled! I'd say the o-ring fix did the job!

04-02-2014, 03:05 PM	#34
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s)	I use 9,001 O rings when I install fuel pumps now. __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P0068 code on tuned vortech help please	Frs32907	Forced Induction	23	04-09-2014 08:19 PM
Circuit Motorsports - EcuTek Tuned Stock BRZ: 191whp / 163wtq: +17whp & +12wtq!!	Circuit Motorsports	Engine, Exhaust, Bolt-Ons	16	09-24-2013 11:17 AM
EcuTek ProECU Moto-East Tuned Group Buy!	Xero-Limit	Groupbuys	52	04-19-2013 12:58 PM
P0172 Code with Injen Intake, will EcuTek tune help?	ron_jeremy	Engine, Exhaust, Transmission	0	11-27-2012 11:22 AM
Invidia TI exhaust Dynoed and Ecutek tuned(Video)	Ny Brz	Engine, Exhaust, Transmission	12	10-12-2012 11:13 AM

04-02-2014, 12:36 AM	#29
jamesm Banned Join Date: Mar 2013 Drives: 2013 FR-S Location: Orlando, FL Posts: 2,929 Thanks: 1,166 Thanked 2,294 Times in 1,180 Posts Mentioned: 313 Post(s)	glad to see everything worked out. i'm sure that was your problem if it only had the 2 o-rings and no spacer installed. should be good to go now!

04-05-2014, 10:53 PM	#35
kmbkk First 86 Driver Baby! Join Date: Jan 2012 Drives: FR-S, Flex Location: Williamsburg, VA Posts: 1,760 Thanks: 520 Thanked 525 Times in 356 Posts Mentioned: 32 Post(s)	Well, after a couple of days of quite a bit of stop and go traffic I'm happy to report I haven't gotten the code nor has my car stalled! I'd say the o-ring fix did the job!

User Name		Remember Me?
Password