DIY - Third brake light relocate to headliner - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RedLeader · 03-25-2014, 03:27 PM

Quote:

Originally Posted by husker741

Just make sure to watch how you do this so you don't get banned...

THIS! Do not sell/advertise/mention/allude to them on the forum without paying the vendor fee, otherwise you'll get banned and permanently barred from having PMs and a signature. Been there, dealt with that, still living with it.

Herndon · 03-25-2014, 03:29 PM

I'd pay that for one!

Sent from my iPhone using Tapatalk

Silver Ignition · 03-25-2014, 03:48 PM

count me in for one also!

ApolloSki · 03-25-2014, 03:53 PM

Quote:

Originally Posted by DarkestBuddha

nice dude, clean job
gana be doing this also, but longer. (closer to how it looks on the Tesla)

Nice, someone did a DIY for you.

fatherfork · 03-25-2014, 04:06 PM

Quote:

Originally Posted by husker741

Just make sure to watch how you do this so you don't get banned...

Thank you. I have been thinking about this.

To be clear (with the admins), I have no current plans to make and sell these. I am not a vendor and do not intend to play one on TV.

I will not, however, rule it out for the future. I'm glad you all like it. I smile every time I look in my rear view mirror.

fatherfork · 03-25-2014, 04:09 PM

Quote:

Originally Posted by Anomie

Great job, I'd definitely be down to buy one off you. Your windows don't appear to be tinted. Do you think that LED bar would be bright enough to be noticeable behind a 20% tint?

It will be visible, but I really doubt I would use this particular LED strip behind 20%. I do plan on getting 35% soonish, so we'll see how that goes. I may have to source something a little brighter, but I think anyone who wanted this and has as low as 35% would be fine with this strip. As always though, check your local laws.

Edit: The only reason I wouldn't use this strip behind 20% is because of daytime driving. At night I'm sure it would be plenty visible.

fatherfork · 03-25-2014, 04:12 PM

Quote:

Originally Posted by DarkestBuddha

nice dude, clean job
gana be doing this also, but longer. (closer to how it looks on the Tesla)

Thanks! I went with the shorter light because I like the strait line. All the way across can look good, but it's harder to get the curve right.

t.chk · 03-25-2014, 04:20 PM

This is sexier than I would have expected!

I think I am going to use this idea rather than getting the beatsonic spoiler to do the same thing. much cheaper less 'ricer' option (since cops love giving me tickets as it is).

edit1: Although, I am going to try to do it across the whole back of the car and put in some turn signals!
edit2: Alcantara would be really sweet, it would help fill the little gaps that are left after cutting the wood. Might have to pick up some of that too.

Subbed!

codesplice · 03-25-2014, 04:23 PM

Wow, that looks awesome - nice work!

Definitely adding this to my list of future projects.

gtishtar · 03-26-2014, 09:59 AM

count me in for one, and I'm willing to pay extra shipping fee to taiwan

Sent from my C6802 using Tapatalk

fatherfork · 03-26-2014, 02:24 PM

Just a quick update guys, thanks for the interest. I wasn't planning to build these, but I'm looking into forum sponsorship now so we'll see what happens :-)

Donroy · 03-26-2014, 03:10 PM

Quote:

Originally Posted by fatherfork

Just a quick update guys, thanks for the interest. I wasn't planning to build these, but I'm looking into forum sponsorship now so we'll see what happens :-)

Woohoo!!! Glad to hear. This looks awesome

00NissanNinja · 03-26-2014, 04:14 PM

Excellent

That is a very clean install, very nice work

C130NAV · 03-26-2014, 11:28 PM

You can count me in on one to :-) You could also see if someone with a 3D printer could scan and then just mass produce the wood part in black that would only leave the mount and LED part up to you or who ever. Just brainstorming.

03-25-2014, 04:23 PM	#37
codesplice Elite Recognized Geek Join Date: Mar 2014 Drives: 2014 DGM BRZ Limited Location: Huntsville, AL Posts: 183 Thanks: 192 Thanked 67 Times in 48 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Wow, that looks awesome - nice work! Definitely adding this to my list of future projects. __________________ This post is a work of fiction. Names, characters, places, and incidents either are the product of the poster's imagination or are used fictitiously, and any resemblance to actual persons, living or dead, business establishments, events, or locales is entirely coincidental. G+

03-26-2014, 09:59 AM	#38
gtishtar Member Join Date: May 2013 Drives: 86 Location: Taiwan Posts: 17 Thanks: 1 Thanked 4 Times in 3 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	count me in for one, and I'm willing to pay extra shipping fee to taiwan Sent from my C6802 using Tapatalk Last edited by gtishtar; 03-26-2014 at 04:06 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZILLA: (How-To) REAR FOG LIGHT WITH BRAKE LIGHT MOD!	ZILLA	DIY (Do-It-Yourself) Guides	117	09-19-2017 11:17 AM
PHASTEK Rear Fog Light/Brake Light Kit for the Scion FR-S and Subaru BRZ	PhastekSport	Exterior Parts - Lighting	57	07-10-2017 09:14 PM
4th Brake Light/Rear Fog Light Kit FRS/BRZ/GT86 - $59.95!	Vicious LED	Groupbuys	58	01-05-2014 06:13 PM
For Sale: Smoked/Red/Clear Reverse Light + Brake Light Bars Brand New!	Vicious LED	Exterior Parts (Aero, Lighting, Etc.)	9	08-25-2013 08:26 PM
4th Brake Light Mod	boredom.is.me	Cosmetic Modification (Interior/Exterior/Lighting)	1	12-29-2012 02:46 AM

03-25-2014, 03:29 PM	#30
Herndon Senior Member Join Date: Dec 2013 Drives: 2014 SWP BRZ Location: Nashville, TN Posts: 103 Thanks: 23 Thanked 41 Times in 21 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I'd pay that for one! Sent from my iPhone using Tapatalk

03-26-2014, 04:14 PM	#41
00NissanNinja The Thread Lurker Join Date: Jan 2012 Drives: '14 BRZ, '17 GTI, MT09 Location: SW OH Posts: 552 Thanks: 282 Thanked 213 Times in 135 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Excellent That is a very clean install, very nice work

03-26-2014, 11:28 PM	#42
C130NAV Senior Member Join Date: Dec 2013 Drives: Whiteout 6Sp FR-S Location: East Boston Posts: 320 Thanks: 81 Thanked 80 Times in 60 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	You can count me in on one to :-) You could also see if someone with a 3D printer could scan and then just mass produce the wood part in black that would only leave the mount and LED part up to you or who ever. Just brainstorming.

User Name		Remember Me?
Password