Can't WAIT!!! Blitz Nur Spec C Ti Quad Exhaust With Diffuser for 86/BRZ

[FR-S Matt]

Originally Posted by CrazyWookiee

This is a Quad tip blitz

I know, I'm saying you can fabricate your own Blitz exhaust for 3/4 the cost of it with some effort. I don't think many can justify the price of this exhaust along with the AMUSE unless you're just made of money and at that point, why the hell are you driving an FR-S/BRZ? lol. Go get a GTR!

[canu_50]

we willl see the difference when yours rust and not is... and weight there is a big difference.. This ain't no poor bastard exhaust, it comes in the line with akrapovic and others TItanium exhaust!

[EpicNameBro]

Originally Posted by FR-S Matt

I know, I'm saying you can fabricate your own Blitz exhaust for 3/4 the cost of it with some effort. I don't think many can justify the price of this exhaust along with the AMUSE unless you're just made of money and at that point, why the hell are you driving an FR-S/BRZ? lol. Go get a GTR!

I think you're missing out on the fact that the diffuser is included as you would need to change it to fit the quad exhaust. None the less it's not something that i would do per se, but if someone wants to drop that money on an exhaust for this particular car by all means go ahead. I can't justify it because of the car but if it were a RS5, then it would be a different story...

[FR-S Matt]

Ok, so you add the TRD rear lip for $520 and get the Q300 for $670. After finding tips and paying a shop to modify this, you're well under the $3000 price tag. Once again, I don't see why people are paying $3000 for a Blitz logo when it's the same thing.

Just to clarify, rear lip/bumper is the rear piece with the cutout for the quad exhaust.

Diffuser goes underneath the muffler directing air out of the rear.

[the new guy]

Originally Posted by FR-S Matt

Ok, so you add the TRD rear lip for $520 and get the Q300 for $670. After finding tips and paying a shop to modify this, you're well under the $3000 price tag. Once again, I don't see why people are paying $3000 for a Blitz logo when it's the same thing.

Just to clarify, rear lip/bumper is the rear piece with the cutout for the quad exhaust.

Diffuser goes underneath the muffler directing air out of the rear.

You could go even cheaper and just get the TRD rear garnishes for $180 with the TF works axle back for $500 and still accomplish the beefy burnt titanium tip look.

I took some pictures of the setup last weekend I'll post soon. Looks great IMO and quite a lot of people at our 86 meet complimented it.

[j122987]

All exhausts are Nice

In a sense you get what you pay for

I looked through almost every exhaust system and after
Looking into
Looks, style, company background etc etc etc and sound even though they are sadly just videos,

I went with what i personally liked the most
Yes it was a damn arm and a leg and even head you might say,
I'm truly gonna be happy with it
And that to me at the end of the day is what is absolutely the most important

That dumb saying to each his own
Is actually very accurate

I'm not gonna bash on Invidia as i owned one before on my fa5 civic si
And it was great! A bit drone happy but it was nice for sure
But at the same time
You get what you pay for saying applies like a mother F
So without a doubt in my mind for a split second
Blitz, Amuse, etc REAL JDM quality and even some Domestic companies
Are at another level compared to all the china made stuff

It is what it is!
I just am still super excited!

Again
I'm not butt hurt at anyone's comments
I'm happy to see everyone participate to begin with!

[FR-S Matt]

Originally Posted by j122987

All exhausts are Nice

In a sense you get what you pay for

I looked through almost every exhaust system and after
Looking into
Looks, style, company background etc etc etc and sound even though they are sadly just videos,

I went with what i personally liked the most
Yes it was a damn arm and a leg and even head you might say,
I'm truly gonna be happy with it
And that to me at the end of the day is what is absolutely the most important

That dumb saying to each his own
Is actually very accurate

I'm not gonna bash on Invidia as i owned one before on my fa5 civic si
And it was great! A bit drone happy but it was nice for sure
But at the same time
You get what you pay for saying applies like a mother F
So without a doubt in my mind for a split second
Blitz, Amuse, etc REAL JDM quality and even some Domestic companies
Are at another level compared to all the china made stuff

It is what it is!
I just am still super excited!

Again
I'm not butt hurt at anyone's comments
I'm happy to see everyone participate to begin with!

It's all about what makes you happy man. If you have the cash to toss at it, go for it. If you don't get what you want, you'll regret it.

[j122987]

Very true^^^^^^

[GT86drifter]

Originally Posted by the new guy

Ughhh, this was the exhaust I always wanted and I actually did quite a bit of shopping for it. There's at least one in the US as well, I believe Dark Card photography has some photos of the car.

I can tell you that 3k is over MSRP and the lowest price I got was from calling Carson Toyota around 2600 shipped.

In the end I ended up going with the @Touge Factory axle back for $500 with TRD rear garnishes.

www.tf-works.com/tf-quad-burnt-tip-axle-back-exhaust-for-scion-fr-s-subaru-brz-with-trd/

you have sound clips? the sound clip in the site is kinda loud but im not sure

[mav1178]

Originally Posted by FR-S Matt

Ok, so you add the TRD rear lip for $520 and get the Q300 for $670. After finding tips and paying a shop to modify this, you're well under the $3000 price tag. Once again, I don't see why people are paying $3000 for a Blitz logo when it's the same thing.

Originally Posted by FR-S Matt

It's all about what makes you happy man. If you have the cash to toss at it, go for it. If you don't get what you want, you'll regret it.

You know, you really answered your own question.

-alex

[CrazyWookiee]

I know where you are coming from. But another reason for the price is the cost of R&D and testing. Lots of costs are associated with that in the man hours and engineering. Of course if you just made an exact replica, you'd skip all that. You'd just pay for the materials and the labor to manufacture that.

Personally, I'd rather pay more money to the original maker who designed and did the research to get the successful product. Not the company that built the exact same one and skipped all the sweat, engineering, research and testing.

If we keep buying the parts that are the copies after all that hard word of R&D, then those original companies that innovate and built the original part would have less incentive to make any other future products.

Good Read:
http://blog.bespokeventures.com/tag/copy/

Originally Posted by FR-S Matt

I know, I'm saying you can fabricate your own Blitz exhaust for 3/4 the cost of it with some effort. I don't think many can justify the price of this exhaust along with the AMUSE unless you're just made of money and at that point, why the hell are you driving an FR-S/BRZ? lol. Go get a GTR!

[FR-S Matt]

Originally Posted by mav1178

You know, you really answered your own question.

-alex

I know. Contradicted my own statement. I know it would be a completely different story if I had the money to just blow on an exhaust like this, but my mindset is most people won't actually look at something that close and can cut a corner. I'm sure if I was in the OP's shoes though and had the cash, I would drop the money on the Blitz system if I REALLY wanted it.

[j122987]

Well first off,
HELL YES!!! I REALLY WANT IT!!!
Lol

Secondly the comment above is correct as well!
Gotta give credit and rep the companies that actually do the hard work!!!

And its ORIGINAL not a duplicate

ALL companies are in it for $$$
But
What separates the game is

Some companies (legit) are not ONLY in it for the $
They actually have a true passion and love for it
As apposed to cheap replica companies are in it for the $$$
Not that its a 10"% bad thing cause it does open the market to the people out there on that level of course

I hope what I'm saying makes sense

[the new guy]

@IShift, here's the thread.

Any update on the exhaust shipping?