OpenFlash Tablet Firmware 1.23 Preview - Page 6 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

elrod · 03-08-2014, 03:09 PM

Quote:

Originally Posted by wparsons

^^ are you also having the tablet update everytime you connect it to a computer (with internet)? I'm having the same issue, and mine keeps updating (to the same version) every time I connect it to open flash manager.

I suspect maybe the update was partially unsuccessful on the tablet, and it isn't playing nice with OFM?

Yes, mine sez that it updates every time I connect it to the computer. From my memory, that has always been the case.

amaciose · 03-08-2014, 06:52 PM

I've been having trouble downloading logs as well. OFM will stop responding after I have it "Read". Running Windows 7 OFM 1.06 with OFT 1.23.

If I remember right, I'm only logging the original channels from 1.22 plus road speed. Could that additional channel be causing problems?

wparsons · 03-09-2014, 10:04 AM

^^ It's not road speed, because I'm having the same issue without logging road speed. Someone else seems to be having the same issue with the original 12 channels logged as well.

yoruck · 03-09-2014, 10:47 AM

Quote:

Originally Posted by wparsons

^^ It's not road speed, because I'm having the same issue without logging road speed. Someone else seems to be having the same issue with the original 12 channels logged as well.

yes i have the issue with the original 12 channel logged

wparsons · 03-09-2014, 10:34 PM

Shiv, is there anything we can pull from OFM to help you with this?

If you're open to the idea and can send me the source code I can run OFM in a debugger and get more details on what exactly is failing? I'd have no issue signing an NDA or something to prevent the source from leaking out. I have no real interest in reading the code, just trying to help out where I can

steve99 · 03-09-2014, 11:15 PM

Quote:

Originally Posted by amaciose

I've been having trouble downloading logs as well. OFM will stop responding after I have it "Read". Running Windows 7 OFM 1.06 with OFT 1.23.

If I remember right, I'm only logging the original channels from 1.22 plus road speed. Could that additional channel be causing problems?

Its working ok for me on Win Xp, changed to a few different channels including road speed and ok I am on G rom though

Just noticed your on OFM 1.06 ?? current version is 1.07 might be worth upgrading

wparsons · 03-10-2014, 11:40 AM

I'm having the issue with OFM 1.07, I downgraded to 1.06 just to try and had the same issue.

amaciose · 03-10-2014, 12:21 PM

Quote:

Originally Posted by steve99

Its working ok for me on Win Xp, changed to a few different channels including road speed and ok I am on G rom though

Just noticed your on OFM 1.06 ?? current version is 1.07 might be worth upgrading

Quote:

Originally Posted by wparsons

I'm having the issue with OFM 1.07, I downgraded to 1.06 just to try and had the same issue.

Upgraded to 1.07 and still having the issue.

Shiv@Openflash · 03-10-2014, 02:41 PM

Hi guys,
Could someone who is having this problem (reading datalog .csv file from OFT) give me the list of datalog channels they have configured. I'd like to reproduce this issue here if possible. So far I haven't run into any problem on any of the computers we have here. But perhaps there is one channel that is giving a problem and I don't have it in the list of logged channels.

Also please give me your software CAL ID too because different CAL IDs will request different logging channel IDs when it comes advance multiplier.

elrod · 03-10-2014, 03:24 PM

@shiv@vishnu
I refer you to post #71 above. My cal ID is ZA1JA00C. When I data log the original 12, it works [engine speed, throttle, maf voltage, engine load, ignition advance, KC learned, AFR, ADV multiplier, VVT intake, VVT exhaust, STFT, LTFT.] When I omit two [VVT intake and VVT exhaust], OFM locks up on the laptop. The same thing results when I insert new parameters (in those open slots) such as ambient temp and coolant temp. Hope this helps.

wparsons · 03-10-2014, 04:12 PM

I'm running a ZA1J700C, doesn't matter what channels I log it doesn't work. I've tried the original 12, plus a mix of others. I haven't had time to log just one channel, then keep adding one more until it breaks though.

Drofnum · 03-10-2014, 04:16 PM

I just got my OFT, loaded a new flash up and all went well. Love the tune. But i am having a problem logging, any time i try to start it up i get an error. I've attached a picture showing the error.

steve99 · 03-10-2014, 04:21 PM

Quote:

Originally Posted by Drofnum

I just got my OFT, loaded a new flash up and all went well. Love the tune. But i am having a problem logging, any time i try to start it up i get an error. I've attached a picture showing the error.

This happens with engine running ??

Drofnum · 03-10-2014, 04:35 PM

Happens with engine running yes. Tried it with the key on and engine not running as well as engine running. I could never get it to start up. I didnt have a lot of time since i did this on my lunch hour so I will do a bit more troubleshooting after work.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFlash Tablet	Rombinhood@OpenFlash	Software Tuning	1838	07-29-2023 07:35 PM
FS: Openflash tablet	nguyen_er	Engine, Exhaust, Bolt-Ons	6	12-30-2013 01:31 PM
new OpenFlash tablet	autobrz	Engine, Exhaust, Bolt-Ons	5	12-23-2013 10:05 AM
OpenFlash Tablet Firmware 1.19 Now Available: Stores up to 5 ROM on the OFT	Shiv@Openflash	Software Tuning	33	12-20-2013 10:38 AM
WTB Openflash Tablet	Vlady	Want-To-Buy Requests	0	10-25-2013 01:10 AM

03-08-2014, 06:52 PM	#72
amaciose Senior Member Join Date: Oct 2013 Drives: 2013 BRZ Limited Location: Tucson, AZ Posts: 266 Thanks: 224 Thanked 127 Times in 78 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	I've been having trouble downloading logs as well. OFM will stop responding after I have it "Read". Running Windows 7 OFM 1.06 with OFT 1.23. If I remember right, I'm only logging the original channels from 1.22 plus road speed. Could that additional channel be causing problems?

03-10-2014, 02:41 PM	#79
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,470 Times in 1,494 Posts Mentioned: 605 Post(s) Tagged: 9 Thread(s)	Hi guys, Could someone who is having this problem (reading datalog .csv file from OFT) give me the list of datalog channels they have configured. I'd like to reproduce this issue here if possible. So far I haven't run into any problem on any of the computers we have here. But perhaps there is one channel that is giving a problem and I don't have it in the list of logged channels. Also please give me your software CAL ID too because different CAL IDs will request different logging channel IDs when it comes advance multiplier.

03-10-2014, 03:24 PM	#80
elrod Member Join Date: Jan 2013 Drives: WRB BRZ Limited MT Location: Arlington, TX Posts: 36 Thanks: 13 Thanked 4 Times in 4 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	@shiv@vishnu I refer you to post #71 above. My cal ID is ZA1JA00C. When I data log the original 12, it works [engine speed, throttle, maf voltage, engine load, ignition advance, KC learned, AFR, ADV multiplier, VVT intake, VVT exhaust, STFT, LTFT.] When I omit two [VVT intake and VVT exhaust], OFM locks up on the laptop. The same thing results when I insert new parameters (in those open slots) such as ambient temp and coolant temp. Hope this helps.

03-10-2014, 04:16 PM	#82
Drofnum Member Join Date: May 2012 Drives: CBS Subaru BRZ Location: Cedar City, UT Posts: 41 Thanks: 3 Thanked 12 Times in 8 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I just got my OFT, loaded a new flash up and all went well. Love the tune. But i am having a problem logging, any time i try to start it up i get an error. I've attached a picture showing the error.

03-10-2014, 04:35 PM	#84
Drofnum Member Join Date: May 2012 Drives: CBS Subaru BRZ Location: Cedar City, UT Posts: 41 Thanks: 3 Thanked 12 Times in 8 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Happens with engine running yes. Tried it with the key on and engine not running as well as engine running. I could never get it to start up. I didnt have a lot of time since i did this on my lunch hour so I will do a bit more troubleshooting after work.

User Name		Remember Me?
Password