XXR 527/530 Gallery - Page 113 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Touge_ninja · 03-04-2014, 02:47 AM

Hey guys,

Im planning on running 18x9.75 +20mm will this work with out rolling fenders? Also I'm dropped on BC coils.

Thanks for the advice

Killerbee · 03-04-2014, 04:06 AM

Quote:

Originally Posted by scionfr_s

what is lug nuts color would look good on 527 Chrome Black???

I did go for black lug nuts.
Check the color of you wheels carefully before mounting the tires, I ended up with 3 different versions of chromium black. Replaced them for flat black in the end as the importeur was not able to provide me with an exchange set of chromium black all with the same tone

http://www.ft86club.com/forums/showthread.php?t=32195

xRavenFRSx · 03-04-2014, 10:59 AM

Quote:

Originally Posted by mwjcyber

XXR 530 18x7.5 +38 Chromium Black - 19.8lbs each
- bad morning lighting, color is much lighter in person.
225/40/18 Michelin Pilot Sport A/S 3
Lowered 1.75" on Fortune Auto 500's
Factory spec alignment
10mm rear spacers going on soon to make rear flush like front.

How do you like the A/S 3's? Being in Tampa, FL I wouldve done fine with a summer tire year round but the shop ive gone to for past vehicles couldnt get me anything other than A/S 3's and everyone i talked to said go with those because theyre better handling then most low/mid range summer tires anyways.Would you agree with that?

Already had them place the order so im taking them either way, im just curious.

mazzobrz · 03-04-2014, 12:34 PM

Hello guys, I like 527 17x8.25 +25 Bronze but are extremes of tire size 215/45? Thanks for the help

Vten · 03-04-2014, 03:00 PM

Quote:

Originally Posted by mazzobrz

Hello guys, I like 527 17x8.25 +25 Bronze but are extremes of tire size 215/45? Thanks for the help

Not extreme at all. I'm using the USDM stock Michelin 215/45/17 , with 1.3 front and 1.7 rear camber , lowered with bc coilover ... It poke out just a little .

http://www.ft86club.com/forums/showp...&postcount=809

damaster32 · 03-04-2014, 04:35 PM

Quote:

Originally Posted by Vten

Not extreme at all. I'm using the USDM stock Michelin 215/45/17 , with 1.3 front and 1.7 rear camber , lowered with bc coilover ... It poke out just a little .

http://www.ft86club.com/forums/showp...&postcount=809

I'm doing the same thing but i bought ST coils. Thanks Vten for all of pics of your clean ride.

mazzobrz · 03-04-2014, 07:04 PM

Quote:

Originally Posted by Vten

Not extreme at all. I'm using the USDM stock Michelin 215/45/17 , with 1.3 front and 1.7 rear camber , lowered with bc coilover ... It poke out just a little .

http://www.ft86club.com/forums/showp...&postcount=809

Thanks Vten, my brz is white pear

, you have more photos front and rear? the wheels go over the fenders?

BlueDubbinTDI · 03-04-2014, 07:29 PM

Quote:

Originally Posted by Maruthas

i need hub rings to mount the 527 to the car? or am i okay with just wheels and rug nuts?

Theyre like $6 a set shipped on ebay...why would you not

Maruthas · 03-04-2014, 07:59 PM

Does it matter alumnium or plastic?

Vten · 03-04-2014, 08:57 PM

Quote:

Originally Posted by mazzobrz

Thanks Vten, my brz is white pear

, you have more photos front and rear? the wheels go over the fenders?

I think I have it in my computer at home ... I'll try to find it and post em later .

Here's couple more pics from before

http://www.ft86club.com/forums/showp...&postcount=688

Rapiddan45 · 03-04-2014, 10:02 PM

Cant wait for mine to get here tomorrow. Decided on the 527 18x8.75 +35 chromium black wrapped with Kumho Ecsta SPT 235/40 on my Ultramarine with blue lugs. Then the Tein S-Tech's should be here before Friday with camber bolts, will have pics up this coming up week after I install it all. Haven't seen to many, if any Ultramarines running these so hope it turns out good.

KkSc · 03-05-2014, 02:25 AM

Quote:

Originally Posted by Vten

Not extreme at all. I'm using the USDM stock Michelin 215/45/17 , with 1.3 front and 1.7 rear camber , lowered with bc coilover ... It poke out just a little .

http://www.ft86club.com/forums/showp...&postcount=809

any wheel spacers?

Vten · 03-05-2014, 02:36 AM

Quote:

Originally Posted by KkSc

any wheel spacers?

No spacer ... They're already +25 offset.

KkSc · 03-05-2014, 02:39 AM

Quote:

Originally Posted by Vten

No spacer ... They're already +25 offset.

damn..i didn't see the offset...

how much drops do you have on that setup?

03-04-2014, 10:02 PM	#1579
Rapiddan45 Senior Member Join Date: Aug 2013 Drives: 2013 FR-S M/T Ultramarine Location: Hill AFB, Utah Posts: 127 Thanks: 41 Thanked 103 Times in 50 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Cant wait for mine to get here tomorrow. Decided on the 527 18x8.75 +35 chromium black wrapped with Kumho Ecsta SPT 235/40 on my Ultramarine with blue lugs. Then the Tein S-Tech's should be here before Friday with camber bolts, will have pics up this coming up week after I install it all. Haven't seen to many, if any Ultramarines running these so hope it turns out good. Last edited by Rapiddan45; 03-04-2014 at 10:21 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: ProDrive GC-012L 18x8.5 +48	MarkMash	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	20	05-12-2013 04:55 PM
Is there a thread for 'people doing stupid things in their brand new car' thread?	Symbiont	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	36	02-18-2013 01:24 PM
Official wheel/tire fitment thread needed	empower-auto	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	06-22-2012 02:40 AM
The Wheel and Tire Fitting Thread	EvoFanatic	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	2	03-15-2012 04:05 PM
Are there any RWYB Wheel to Wheel road races?	LexusFman	Other Vehicles & General Automotive Discussions	1	11-05-2011 01:28 PM

03-04-2014, 02:47 AM	#1569
Touge_ninja Sending rods to their doo Join Date: Jul 2012 Drives: 700HP STi Location: Seattle WA Posts: 1,926 Thanks: 169 Thanked 541 Times in 369 Posts Mentioned: 49 Post(s) Tagged: 0 Thread(s)	Hey guys, Im planning on running 18x9.75 +20mm will this work with out rolling fenders? Also I'm dropped on BC coils. Thanks for the advice

03-04-2014, 12:34 PM	#1572
mazzobrz Junior Member Join Date: Mar 2014 Drives: subaru brz Location: Italia Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hello guys, I like 527 17x8.25 +25 Bronze but are extremes of tire size 215/45? Thanks for the help

03-04-2014, 07:59 PM	#1577
Maruthas Member Join Date: Nov 2013 Drives: SWP BRZ Location: Fairfax, VA Posts: 77 Thanks: 3 Thanked 10 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Does it matter alumnium or plastic?

User Name		Remember Me?
Password