Exhaust tips

[humfrz]

Originally Posted by cycleboy

They stick out about an inch to inch and a half. I'd like them a bit closer to even w/ the rear fascia. 1/2 to 1 inch in from where they are would be great.

My favorite tips, being a cyclist, is the bike inner tube:

....... ....... you guys got waaaaaaay too much free time on your hands .....


humfrz

[subiestyle]

Originally Posted by suaveflooder

It's a pain, but you can get them to go further in. Mine sat out too far at first as well. Use both hands and twist. They all still sit out further than the perrin catback, but they won't poke out like they probably are now.

can you post some more side shots?

[suaveflooder]

Originally Posted by subiestyle

can you post some more side shots?

Let me know if you need more

[cycleboy]

Originally Posted by humfrz

....... ....... you guys got waaaaaaay too much free time on your hands .....


humfrz

I can't claim this one, but I may try it sometime.

[cycleboy]

Originally Posted by suaveflooder

It's a pain, but you can get them to go further in. Mine sat out too far at first as well. Use both hands and twist. They all still sit out further than the perrin catback, but they won't poke out like they probably are now.

That's probably a half inch less stick out than mine. I gave them a good shove, but perhaps when this rain stops I'll try a little harder.

[suaveflooder]

Originally Posted by cycleboy

That's probably a half inch less stick out than mine. I gave them a good shove, but perhaps when this rain stops I'll try a little harder.

Just remember to twist. Just pushing didn't help. When I started twisting, I was golden. But this is as far as they would go

[subiestyle]

Originally Posted by suaveflooder

Just remember to twist. Just pushing didn't help. When I started twisting, I was golden. But this is as far as they would go

they stick out way too much. how far do the oem jdm toyota gt86 tips stick out?

[suaveflooder]

Originally Posted by subiestyle

they stick out way too much. how far do the oem jdm toyota gt86 tips stick out?

lol, mine? They stick out about 1/2 inch…that's about a 1/4 inch further than the perrin catback.

JDM tips

Originally Posted by Sportsguy83

Quick update, japanparts.com is super fast with their shipping, only four processing days from shippment to delivery. I was qouted a 28-35 days expected delivery and it only took 12 from order placed date to delivery including wekeends.. WOW...

Here are the updated pics with the tips installed.

Attachment 9453

Attachment 9454

Attachment 9455

Attachment 9456

Looks like they stick out about the same

[cycleboy]

Originally Posted by suaveflooder

Just remember to twist. Just pushing didn't help. When I started twisting, I was golden. But this is as far as they would go

I did that, and I put a small amount of bike grease on them to help them go on. They are sort of butted up against the small detent that is there on the bottom of the exhaust exit pipe. I may still see if they'll go a little more. They've been on for a bit over a month I think.

[FiRStsc10n]

Originally Posted by subiestyle

they stick out way too much. how far do the oem jdm toyota gt86 tips stick out?

[subiestyle]

^ you got a close 3/4 shot?

[FiRStsc10n]

Originally Posted by subiestyle

^ you got a close 3/4 shot?

How is this? 3/4 of my car in Silver, and a friend's whiteout with standard tips

[subiestyle]

Originally Posted by suaveflooder

lol, mine? They stick out about 1/2 inch…that's about a 1/4 inch further than the perrin catback.

JDM tips



Looks like they stick out about the same

so what is the taper like from the outer edge to the inner tube? is it straight or curved?

[suaveflooder]

Originally Posted by subiestyle

so what is the taper like from the outer edge to the inner tube? is it straight or curved?

straight, but at an angle. It's a double walled tip