Nameless Performance Equal Length Stepped Header

[Alabang 86]

Ridiculous

Sent from my HTC One using Tapatalk

[StormTrooper]

Originally Posted by FrsDuke

Yeah so batches of 25. You're in the second batch. I guess the one local who ordered his in may has #1 so only 24 of the first batch still being assembled. Makes sense.

No I talked to Ryan today... The first batch is 50 I am number 50.... The second batch is 25.

The guy who got his already was in some sort of sample group. Not sure if it was to test or what. He ordered back in may.


It sounds like they are being assembled as a group sent off and coated and shipped in order. So I will be the last of the group to get mine. Most likely early March possibly late February.

They are filling orders for the second batch which is why the website talks about March or April since anyone ordering now will be in that group until it's done and then nameless would order more SS piping for more orders.


Regardless I am hoping 2.5inch exhaust results come out either from them or one of the first to get the headers

[FrsDuke]

Cool. The Facebook thing I read said one left in second batch. My mistake.

[StormTrooper]

Originally Posted by FrsDuke

Cool. The Facebook thing I read said one left in second batch. My mistake.

Yeah when I called I thought so too but he looked it up.... Said I was the last of the group currently being built.


Either way everyone who paid so far is in front of me. I hope someone like mad_sb sends out the avcs timing n such so I can make a decent base map.

I'll probably start with the OFT EL stg2 map and just adjust avcs leaving Afr and base timing alone.
We'll see, all depends on how much I work lol. (no good tuners around here that I know of)

What are your plans?

[FrsDuke]

Same plan. Hopefully Oftstg2uel + the madman =

[Victor Draken]

Originally Posted by StormTrooper

Yeah when I called I thought so too but he looked it up.... Said I was the last of the group currently being built.


Either way everyone who paid so far is in front of me. I hope someone like mad_sb sends out the avcs timing n such so I can make a decent base map.

I'll probably start with the OFT EL stg2 map and just adjust avcs leaving Afr and base timing alone.
We'll see, all depends on how much I work lol. (no good tuners around here that I know of)

What are your plans?

Same, I hope some tuners on the website will help to make the OFT EL stg2 better for this header

[mad_sb]

Originally Posted by 14BRZ

^Nope. Order number says in 3rd on the list, no status update here

#2 with no status change, Mine has to go out for coating too. I bet they ship as they complete them, but since they are building in stages they will all flow out the end of the assembly line very close to each other.

It's going to be interesting to see if Nameless posts the cam maps. I guess it depends on who is doing the tuning and what the arrangement is. Either way, i will certainly post my cam settings after I re-tune. If we had an eta on shipping I could go ahead and book dyno time.... but in all reality, I will install it the day it arrives and be at the dyno within a week.

[StormTrooper]

Sounds good....

[Victor Draken]

Originally Posted by mad_sb

#2 with no status change, Mine has to go out for coating too. I bet they ship as they complete them, but since they are building in stages they will all flow out the end of the assembly line very close to each other.

It's going to be interesting to see if Nameless posts the cam maps. I guess it depends on who is doing the tuning and what the arrangement is. Either way, i will certainly post my cam settings after I re-tune. If we had an eta on shipping I could go ahead and book dyno time.... but in all reality, I will install it the day it arrives and be at the dyno within a week.

Love ya

Will it be just a copy paste job then for us to use your cam settings?
Will it be compatible with mostly all the setup if someone has a nameless header or not?

I have no dyno and no tuner in my area so wouldn't know how to extract all the power available from the header

[StormTrooper]

Yeah I'm kinda of in the same boat.... My plan is to learn the ins and outs of Rom raider prior to.

[AZP Installs]

those look great, cant wait to get my hands on as set!

-Ivan


Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

[StormTrooper]

Originally Posted by mad_sb

#2 with no status change, Mine has to go out for coating too. I bet they ship as they complete them, but since they are building in stages they will all flow out the end of the assembly line very close to each other.

It's going to be interesting to see if Nameless posts the cam maps. I guess it depends on who is doing the tuning and what the arrangement is. Either way, i will certainly post my cam settings after I re-tune. If we had an eta on shipping I could go ahead and book dyno time.... but in all reality, I will install it the day it arrives and be at the dyno within a week.

From reading on their website and talking to them about it, it looks like packaged tunes for your mods and locked with EcuTek......

If you need I may be willing to donate for dyno time and some tips on applying it to my car.

I have access to a dyno but the shop doesn't deal with these cars and I'm not confident or rich enough to do it myself.

[raul]

@Ryan@Nameless

I've seen some talk about some tunes becoming available. I'm guessing these will be for customers with your full system. I'm particularly interested in a tune for:

Header
2.5 FP/OP combo
2.5 Axleback
Drop-in filter

I'm sure there are many customers who will have a similar if not this exact setup. If this is provided to us, it saves many of us tuning fees which makes your exhaust products a great value. A list of planned tune setups would probably get a few more people to pull the trigger on headers.

[FrsDuke]

They will be selling tunes, not giving them away.