FT-86 SpeedFactory Catted UEL Header - Page 67 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

thehapaone · 02-12-2014, 05:20 AM

Quote:

Originally Posted by leicaboss

I really can't wait for headers now!

I took the Nameless axleback off today to swap it for a Perrin 2.5" Resonated system + Berk HFC Front Pipe... it's so dang quiet now! The Nameless wasn't loud but it sounded sooooo good. Sigh hopefully headers will do the trick.

a catted header isn't going to increase the volume much if at all...just a heads up

leicaboss · 02-12-2014, 11:44 AM

Quote:

Originally Posted by thehapaone

a catted header isn't going to increase the volume much if at all...just a heads up

Yeah, I figured - oh well! Perhaps I'll get some sort of boxer rumble...

JaguarXJ6 · 02-12-2014, 11:22 PM

Quote:

Originally Posted by leicaboss

I really can't wait for headers now!

I took the Nameless axleback off today to swap it for a Perrin 2.5" Resonated system + Berk HFC Front Pipe... it's so dang quiet now! The Nameless wasn't loud but it sounded sooooo good. Sigh hopefully headers will do the trick.

It's funny how subjective these things can be. Like loudness and quality, I find this setup like my porridge, "just right."

If you listen to the FT86 test car, that's hardly an exhaust I would use on the street. Ever. It's louder than my Supra with high flow intake and UEL headers 3" turbo back!

I run the same Perrin/Berk exhaust and front pipe combo, but have the Perrin CAI and overpipe too.

It snarls when it needs to, sounds like a NA flat 4 should but on cruise there's zero drone just a very quiet burble. If you want stealthy, it obliges. If you want it to snarl when giving it some stick, it will oblige.

tl:dr loud does not necessarily mean good

leicaboss · 02-13-2014, 05:03 AM

[ame]http://youtu.be/MSs-BaurTb8[/ame]

In preparation for my FT86 SpeedFactory UEL headers (catted), I decided to remove the awesome sounding Nameless Axleback to go for something a bit quieter.

Sounds include cold start and idling at around 700 RPM (due to OpenFlash Tablet tune) - then throttle blips to 3k and 5.5/6k. Recorded with GoPro Hero3+ Black Edition, placed within 5 feet of the exhaust.

The current exhaust setup is as follows:
* Perrin Resonated 2.5" Catback Exhaust
* Berk Front Pipe w/ High Flow Cat

tbertran · 02-13-2014, 12:32 PM

Just got an update on my order from Yo. Other buyers should expect an email soon too...
He said that he expects my header to ship by the end of next week.

Getting there, fellas...

husker741 · 02-13-2014, 01:17 PM

Quote:

Originally Posted by tbertran

Just got an update on my order from Yo. Other buyers should expect an email soon too...
He said that he expects my header to ship by the end of next week.

Getting there, fellas...

Holy crap, that's a lot sooner than April.

thehapaone · 02-13-2014, 02:03 PM

Quote:

Originally Posted by tbertran

Just got an update on my order from Yo. Other buyers should expect an email soon too...
He said that he expects my header to ship by the end of next week.

Getting there, fellas...

Nice I expect to hear soon then considering my order wasn't long after yours

Nevermore · 02-13-2014, 02:27 PM

Too bad I can't watch youtube videos at work. I'll have to come back for that one because it's close to my plans, but still pretty different. I've had another new idea (I promise this is the last for a while so people don't want to murder me for changing my mind so often). I don't care if it's louder, my main goal is no rasp/drone/rattle. So with that in mind, my new setup would be the catless version of this, Nameless DP/OP combo, resonated but catless. And resonated PERRIN 2.5" exhaust. My mind says yay, but my ears wish they could hear it first.

EMS Guy · 02-13-2014, 02:48 PM

hmm. Apparently I am late to the party on this as I don't get on here much.

Dynos seem fine. What's pricing?

husker741 · 02-13-2014, 02:58 PM

Quote:

Originally Posted by EMS Guy

hmm. Apparently I am late to the party on this as I don't get on here much.

Dynos seem fine. What's pricing?

$950

BRZerk · 02-14-2014, 11:35 AM

Quote:

Originally Posted by leicaboss

In preparation for my FT86 SpeedFactory UEL headers (catted), I decided to remove the awesome sounding Nameless Axleback to go for something a bit quieter.

Sounds include cold start and idling at around 700 RPM (due to OpenFlash Tablet tune) - then throttle blips to 3k and 5.5/6k. Recorded with GoPro Hero3+ Black Edition, placed within 5 feet of the exhaust.

The current exhaust setup is as follows:
* Perrin Resonated 2.5" Catback Exhaust
* Berk Front Pipe w/ High Flow Cat

I have this same setup, its important to note that cold start is waaaaaaay louder than idle with this setup. Idle sounds stock

leicaboss · 02-14-2014, 02:26 PM

Quote:

Originally Posted by BRZerk

I have this same setup, its important to note that cold start is waaaaaaay louder than idle with this setup. Idle sounds stock

Glad we are on the same setup - dude, it's hilariously different! Friends have commented on how ridiculously loud my car is when we first start it up, then a moment later the sound will all but completely go away hahah.

EMS Guy · 02-14-2014, 04:13 PM

Quote:

Originally Posted by husker741

$950

Little steep for my blood. Thanks!

fender9530 · 02-14-2014, 05:00 PM

Quote:

Originally Posted by tbertran

Just got an update on my order from Yo. Other buyers should expect an email soon too...
He said that he expects my header to ship by the end of next week.

Getting there, fellas...

Anyone else get an update? I was one of the first few and haven't heard anything yet.

02-13-2014, 12:32 PM	#929
tbertran Senior Member Join Date: Sep 2012 Drives: Subaru BRZ (6027xx) Premium Manual Location: Sacramento, CA Posts: 280 Thanks: 83 Thanked 171 Times in 85 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Just got an update on my order from Yo. Other buyers should expect an email soon too... He said that he expects my header to ship by the end of next week. Getting there, fellas... __________________ FT86SpeedFactory catted UEL Header / GReddy EVO3 Catback / Cosworth Drop-in air filter / Shifteck short throw shifter / Kartboy pulley / Rear bumper diffuser / Perrin shorty antenna / Raceseng Slammer knob / Carsmo armrest / Clear side markers / 10" CustomSubEnclosure\|Rockford R500X1D\|Rockford P3D4-10 / Perrin Inlet Hose / GrimmSpeed front strut bar / Valentine V1 with BlendMount / All LED Inside

02-13-2014, 02:27 PM	#932
Nevermore Wayward Member Join Date: May 2012 Drives: Hot Lava 86 Location: Bust of Pallas Posts: 3,336 Thanks: 1,669 Thanked 2,312 Times in 1,386 Posts Mentioned: 50 Post(s) Tagged: 3 Thread(s)	Too bad I can't watch youtube videos at work. I'll have to come back for that one because it's close to my plans, but still pretty different. I've had another new idea (I promise this is the last for a while so people don't want to murder me for changing my mind so often). I don't care if it's louder, my main goal is no rasp/drone/rattle. So with that in mind, my new setup would be the catless version of this, Nameless DP/OP combo, resonated but catless. And resonated PERRIN 2.5" exhaust. My mind says yay, but my ears wish they could hear it first. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Invidia Catless and Catted Front Pipe - FT-86 SpeedFactory	FT-86 SpeedFactory	Engine, Exhaust, Transmission	107	03-29-2016 11:48 AM
catted header or catted front pipe?	gabeg86	Engine, Exhaust, Transmission	28	10-13-2015 01:32 PM
P&l EL catted and coated header.	wootwoot	Engine, Exhaust, Bolt-Ons	8	10-11-2013 01:50 AM
Catted UEL Header	Cjymiller	Engine, Exhaust, Transmission	20	05-24-2013 01:01 PM
*Invidia Catted and Catless Front Pipes* - FT-86 SpeedFactory RELEASE SALE	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	12	10-24-2012 11:12 PM

02-13-2014, 05:03 AM	#928
leicaboss Coffee Snob Join Date: Dec 2013 Drives: '14 SWP BRZ Limited Location: SF (Mission) Posts: 992 Thanks: 536 Thanked 395 Times in 250 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	[ame]http://youtu.be/MSs-BaurTb8[/ame] In preparation for my FT86 SpeedFactory UEL headers (catted), I decided to remove the awesome sounding Nameless Axleback to go for something a bit quieter. Sounds include cold start and idling at around 700 RPM (due to OpenFlash Tablet tune) - then throttle blips to 3k and 5.5/6k. Recorded with GoPro Hero3+ Black Edition, placed within 5 feet of the exhaust. The current exhaust setup is as follows: * Perrin Resonated 2.5" Catback Exhaust * Berk Front Pipe w/ High Flow Cat

02-13-2014, 02:48 PM	#933
EMS Guy The cynic Join Date: Dec 2012 Drives: An ambulance Location: NY Posts: 89 Thanks: 6 Thanked 15 Times in 12 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	hmm. Apparently I am late to the party on this as I don't get on here much. Dynos seem fine. What's pricing?

User Name		Remember Me?
Password