DIY | Radium Catch Can | Video | Full Technical Info

[Dezoris]

I will be doing a follow up DIY on this when the new Radium bracket is finished in the next month or so. With much better detail.

[HRTROB]

Thanks Dezoris for the awesome video!

Any idea on the FRS/BRZ specific kit? And if they will also offer it in a dual catch can setup?

[Stevo22]

Originally Posted by dwx

So I had mine mounted like neutron256 but with a CF plate. Turns out the CF plate cracked where one of the u-bolts attached, so I completely stole his idea and used a piece of 1/8" aluminum plate instead. Not having a CNC at my disposal, one of my holes was off. I did have six holes drilled in the radium bracket so it's plenty sturdy.

I did pony up the money for the 90 degree outlet fitting in the end. I do think the best mounting would be a bracket like the Crawford/Cusco mounted to the back firewall above the trans.

I am kind of confused on the radium website and want to make sure I order the correct thing. Are these the -6AN 90deg 2pc adapter for 3/8" pushlok hose for the inlet and -10AN 90deg 2pc Adapter for 5/8" Pushlok hose?

[AdrianG]

Originally Posted by Stevo22

I am kind of confused on the radium website and want to make sure I order the correct thing. Are these the -6AN 90deg 2pc adapter for 3/8" pushlok hose for the inlet and -10AN 90deg 2pc Adapter for 5/8" Pushlok hose?

You should hold off on ordering right now, they announced on their facebook page that a GT86 kit is coming in the next 10 days or so. You're best to wait for the kit before spending your money.

[Stevo22]

Originally Posted by AdrianG

You should hold off on ordering right now, they announced on their facebook page that a GT86 kit is coming in the next 10 days or so. You're best to wait for the kit before spending your money.

Ok thanks for the information. I was just about to order it. I already made the bracket at my parents house when I visited them for Christmas. My dad has extra aluminum and a better drill press than I do at my house.

[Frost]

Originally Posted by AdrianG

You should hold off on ordering right now, they announced on their facebook page that a GT86 kit is coming in the next 10 days or so. You're best to wait for the kit before spending your money.

Hell it's about time! Can't wait.

[JB86'd]

Thought I'd share mine here. For the bracket I just got an L shaped piece of aluminum, drilled the 3 holes, and wedged it in between the battery and the tray.

[AdrianG]

The kit is now available on Radium's website:

http://www.radiumauto.com/Catch-Can-...Z-86-P374.aspx

[Stevo22]

I. Could be totally wrong but the PVC one should be the one you want if you are just getting one. From what I gather you only really need two if you are going FI. Hope this helps.

[AdrianG]

The crank case vent is the one described in this thread if i'm not mistaken. That's what I ordered anyways.

- AdrianG

[Stevo22]

Originally Posted by AdrianG

The crank case vent is the one described in this thread if i'm not mistaken. That's what I ordered anyways.

- AdrianG

If you look at the install post it talks about the catch can being between the PVC valve and the intake manifold. Which according to radium is the PVC valve one.

I think the one you order is the secondary can which is really only needed for FI I think.

[AdrianG]

Originally Posted by Stevo22

If you look at the install post it talks about the catch can being between the PVC valve and the intake manifold. Which according to radium is the PVC valve one.

I think the one you order is the secondary can which is really only needed for FI I think.

I guess I'll be changing my order then! Radium said the crank case breather is 1/2" and the PCV is 3/8" which tripped me up.

- AdrianG

[Dezoris]

I will be updating all of this once the brackets and all the parts ship.

[that_guy]

Don't think these will fit for those of us running Grimmspeed hood struts.

Nothing ever just bolts on for me! Bah!