Prime Motoring Shop Life Thread

[PrimeMotoring]

Reminder for Everyone!

We noticed that a few guys were planning to meet up at the shop Saturday December 21st so we wanted to invite everyone and make it a “Cars and Coffee” type of event. This will allow everyone to see our daily operations and some of the cars we are working on or pick our brains for information regarding your cars or any performance modification. We will supply coffee and donuts for everyone attending and also be offering dyno pulls at discounted rates for any FRS/BRZ owner interested.

Other than heavy snow, we will be meeting regardless of the weather so put December 14, 2013 in your calenders!

We will be opening our doors at 9 AM and you are free to hang out throughout the day.

Address is:

411 Railroad Ave
East Rutherford, NJ
07073

Please Do NOT Drive up the One Way!!!

[ame="https://maps.google.com/maps?q=411+railroad+ave+east+rutherford+nj&ie=UTF-8&ei=Il-fUuvWO4TqkQenyYAQ&ved=0CAoQ_AUoAg"]Map to Prime Motoring[/ame]



Three Dyno Pulls - $75
*Minimum Clearance is 4", if you are planning on dynoing your car, please make sure you raise it up accordingly*

[PrimeMotoring]

Wanted to thank everyone that showed up at the meet this past Saturday. It was nice meeting everyone and putting faces to names. We should hopefully be holding another meet in the spring so stay tuned.

Here are some pictures.

[sklimo]

That silver one is sex

[PrimeMotoring]

Originally Posted by sklimo

That silver one is sex

and it sure sounds like it now!!!

[sklimo]

Originally Posted by PrimeMotoring

and it sure sounds like it now!!!

She sounds much better now!!! Thanks!!!

[PrimeMotoring]

WRX in for service, Eibach lowering springs, and shifter bushings. Clean bill of health and perfect daily ride height. This ride height is how it should've came from the factory.



Swapped in a set of Winjet Headlights for a customer with 6000k HID drop-in's.









Customer came in because his car was burning oil. We performaned a leak down test to pin point exactly where the issues are



Tearing apart this Hot Lava FRS for P&L Motorsports Turbo Kit



Front and Rear brake service performed on this BMW 335

[PrimeMotoring]

Hot Lava FRS we showed you receiving a P&L Motorsports Turbo all buttoned up. Car is setup with out new Flex Fuel system and initial tuning put down 480 whp and 371 wtq. Dyno graph and videos to follow!










Installed a Crawford Air Oil Separator on the Ultramarine P&L Turbo car to relieve crank case pressure and did away with the stock exhaust for a Ultimate Racing 2.75" Cat-back








Customer drove down from Montreal to pick up a set of white B7 S4 Recaro seats we had for sale and install them. Notice the hockey stick








Drivetrain Stabilizer upgrade for the B8 platform. The Eurocode Alu Kruez Drivetrain Stabilizer's one-piece billet aluminum construction increases steering sensitivity and response. It's also 2lbs lighter that the stock stabilizer.






Big Turbo Forester recieving a new heart, updates to follow






Chevrolet Camaro V6 intake plenum spacer installed




Another customer taking advantage of our great remote-start/keyless-entry system pricing. This Subaru Outback we installed the Python 4103P.




SARD Intake, Blitz Air Filter and Blitz Nur Spec exhaust system fitted to this FRS












Another Jeep Grand Cherokee SRT8 came in for a Borla ATAK Exhaust System. He had us powdercoat the tips gloss black just like the last SRT we did to match his real valence.






BRZ strapped to the dyno for a custom pump gas tune





2010 Nissan Maxima looking for an aggressive tone came in for a Borla Cat-Back. Also powdercoated his tips flat black to give a custom flair.






Audi B8 A4 in for some upgraded lighting. We swapped out the Halogen headlights for a set of OEM E-code Projector head lights with Kufatec Adapter harness. With a few Vag-Com adjustments, we had these working like they were their from factory. Not only do these headlights look better, but perform at another level over the stock halogens.




Vortech Supercharged FRS on the dyno getting a custom tune.

[sklimo]

Can't wait for my kit to go in!!!!!

[PrimeMotoring]

Originally Posted by sklimo

Can't wait for my kit to go in!!!!!

Cant wait to see her rip!

[whitefrs]

Cant wait to see how much power i make


Sent from my iPhone using Tapatalk

[sklimo]

Originally Posted by whitefrs

Cant wait to see how much power i make


Sent from my iPhone using Tapatalk

10 HP less then me. HAHAHAHAHAHAHAHA

[PrimeMotoring]

Prime Motoring/Jr Tuned 448whp & 346wtq P&L Motorsports Stage 1 Turbo Kit FRS

http://www.ft86club.com/forums/showthread.php?t=55316

Check it out!

[PrimeMotoring]

Originally Posted by sklimo

10 HP less then me. HAHAHAHAHAHAHAHA

hahahaha, doubt that lol

[sklimo]

Originally Posted by PrimeMotoring

hahahaha, doubt that lol

LMMFAOOOOOOO!!!!!! I had to. It's Wilbert