What parts would you like to see!!!

[thatfilipinoguy]

Originally Posted by PERRIN_Mladen

Are you referring to a skid plate type of thing, or just a replacement for the under trays?

Yes, I am talking about a replacement for the plastic under tray...or even a kit that allows you to completely cover the bottom of the car.

[nyfries]

A decent phone holder spec just for the car. Don't really like the placement of the proclip ones

[Clot]

Originally Posted by PERRIN_Mladen

Are you referring to something along the lines of the Prova vent kit?

Yes and no. I was imagining something open (like Provo), but also with fender cutting instructions/templates, ducts(?), with or without mesh depending on the look of the ducts, and maybe some unique external styling (no mesh would achieve that for sure). All this assumes that functional vents bring some cooling benefits, otherwise it just ends up being a cosmetic part. The challenge would be to do it with minimum tooling to keep the cost down, but to keep the install clean and professional, and corrosion-protected when cutting the guards. Color-matched, or just black perhaps?

[Clot]

And do you already do a RHD master cylinder brace?

[Priapus]

APR style non-cf front brake cooling kit.

[Kelbyat07]

Aggressive spoiler and any kind of body kit that doesn't involve drilling. I promise you guys will have a lot of customers or at least one (me)

[Kuri]

Full Pulley Kit. Like Raceseng, 86motoring.

Red Oil Filter cap (Yes I saw the silver and black)

More Suspension Bushings

[JDKane527]

Bushings or control arms

Sent from my SCH-I535 using Tapatalk

[PERRIN_Mladen]

Originally Posted by thatfilipinoguy

Yes, I am talking about a replacement for the plastic under tray...or even a kit that allows you to completely cover the bottom of the car.

Gotcha! Thank you for clarifying. I will pass the info along.

Originally Posted by nyfries

A decent phone holder spec just for the car. Don't really like the placement of the proclip ones

Are you wanting something more focused on the dash rather than the vents?

Originally Posted by Clot

Yes and no. I was imagining something open (like Provo), but also with fender cutting instructions/templates, ducts(?), with or without mesh depending on the look of the ducts, and maybe some unique external styling (no mesh would achieve that for sure). All this assumes that functional vents bring some cooling benefits, otherwise it just ends up being a cosmetic part. The challenge would be to do it with minimum tooling to keep the cost down, but to keep the install clean and professional, and corrosion-protected when cutting the guards. Color-matched, or just black perhaps?

Hmm, I can see you've put a decent amount of thought into this. I will toss the idea around with Jeff and see if I can gauge his input as well. Any part that we do make, will more than likely always have instructions accompanying it, so that is never a worry!

Originally Posted by Priapus

APR style non-cf front brake cooling kit.

But then where will my fogs go!?! kidding kidding. Thank you very much for the idea!

Originally Posted by Kelbyat07

Aggressive spoiler and any kind of body kit that doesn't involve drilling. I promise you guys will have a lot of customers or at least one (me)

Spoiler and body accessories is probably something that we will not get into, but I do think that is a great idea.

Since I would buy 1 as well.

Originally Posted by Kuri

Full Pulley Kit. Like Raceseng, 86motoring.

Red Oil Filter cap (Yes I saw the silver and black)

More Suspension Bushings

A pulley kit is actually something that we have been working on. We have 2 more pulleys coming out, I just do not have an ETA for them currently.

I agree that having a red oil cap would be awesome! I have brought that up and it is something we are looking into!

What suspension bushings exactly are you wanting to see?

Originally Posted by JDKane527

Bushings or control arms

Sent from my SCH-I535 using Tapatalk

Same as above, what type of bushings are you interested in seeing?

Once again guys, the amount of input everyone is contributing is awesome! Thank you all very much!

[sosick]

Plz make a cover for one of the exhaust holes in our bumpers

[Clot]

Just to double check, do you already do a RHD master cylinder brace? (didn't see a reply in your last group response)

[bcj]

Low profile replacement for the starship enterprise stop light in the rear window.
A row of LEDs in an enclosure with a rubber lip against the window.

Damn, that thing gets in the way.

[BatStig]

I would love to see a rear diffuser like the one-off made by Afterhours Automotive for the MotoIQ SEMA FR-S. It is such a well thought out design.

http://www.motoiq.com/MagazineArticl...nd-Seibon.aspx

Edit: Just saw where you said you probably won't do body/aero. Maybe this could be a joint venture? Last posted in the thread someone had contacted Afterhours and they said they were considering making this and they were trying to figure out what exhaust to shape the diffuser around. http://www.ft86club.com/forums/showthread.php?t=51227

[nyfries]

Originally Posted by PERRIN_Mladen

Gotcha! Thank you for clarifying. I will pass the info along.



Are you wanting something more focused on the dash rather than the vents?

I like pro clip mounts, they way you can just slide you phone into the mount withtou have to fidget with anything, and its slim. What i don't like about the stuff they currently have for the frs is that there to mount it to the car you big long piece of plastic that you fit around the passenger side fake carbon dash piece, something like this



or even this



would look much much cleaner