MAPerformance aluminum alternator/AC covers *Available now!* - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

MAPerformance · 12-11-2013, 05:12 PM

Now available are the billet alternator and A/C covers. These are milled out of a solid piece of billet aluminum, and featured a textured bezel. These are a direct bolt on, and ready to go! Retail will be $99 for the A/C cover, and $79 for the Alt cover, but all FT86 club members will get a special package deal. $149 shipped for both in the continental U.S.

soros151 · 12-18-2013, 11:11 PM

watching

MAPerformance · 12-19-2013, 11:28 AM

Quote:

Originally Posted by soros151

watching

Here is the A/C design...

cslntuee · 12-21-2013, 12:23 AM

Quote:

Originally Posted by MAPerformance

Here is the A/C design...

When you will post the image and the ETA?
Thanks.

MAPerformance · 12-21-2013, 05:14 PM

Quote:

Originally Posted by cslntuee

When you will post the image and the ETA?
Thanks.

We are getting closer. Planning on making our MAP logo smaller, as well as an option for the "86 boxer" logo on them. Hopefully after the holidays we will have the prototype's done.

cslntuee · 12-22-2013, 04:03 AM

Quote:

Originally Posted by MAPerformance

We are getting closer. Planning on making our MAP logo smaller, as well as an option for the "86 boxer" logo on them. Hopefully after the holidays we will have the prototype's done.

Could you also offer other logo option for Subaru BRZ owner
or maybe no logo option?
I personal think that 86 logo not match or suitable for Subaru BRZ.
Thanks again

Foobar · 12-22-2013, 09:16 AM

Any chance you can offer one with the notch cut out for the Vortech kit fitment?

DJCarbine · 12-22-2013, 09:19 AM

Quote:

Originally Posted by Foobar

Any chance you can offer one with the notch cut out for the Vortech kit fitment?

I was just about to ask this....

MAPerformance · 12-22-2013, 02:15 PM

Quote:

Originally Posted by cslntuee

Could you also offer other logo option for Subaru BRZ owner
or maybe no logo option?
I personal think that 86 logo not match or suitable for Subaru BRZ.
Thanks again

I don't think that should be an issue at all.

MAPerformance · 12-22-2013, 02:16 PM

Quote:

Originally Posted by Foobar

Any chance you can offer one with the notch cut out for the Vortech kit fitment?

I never thought of this. I will have to look into it. Any chance someone can take a picture of what you have to notch out for the Vortech kit?

Foobar · 12-22-2013, 02:28 PM

Quote:

Originally Posted by MAPerformance

I never thought of this. I will have to look into it. Any chance someone can take a picture of what you have to notch out for the Vortech kit?

You'll need access to someone with the kit to get the exact dimensions, but here's what it looks like:

Basically you need to notch out that corner. Enough to allow the pulley/belt to fit on the side, and enough to make room for the blower on the front.

MAPerformance · 12-23-2013, 05:26 PM

Got the alternator one completed. Actually turned out awesome! It looks great in person.

Pitman · 12-23-2013, 07:26 PM

They look very good

Any idea on pricing and finish that will be available (i.e. anodized, powdercoated, different colors?)

chiefshayan · 12-23-2013, 07:29 PM

Looks great! Any pricing or estimated arrival?

12-11-2013, 05:12 PM	#1
MAPerformance Senior Member Join Date: Aug 2012 Drives: Asphalt FRS Location: Cottage Grove, MN Posts: 1,272 Thanks: 669 Thanked 981 Times in 540 Posts Mentioned: 84 Post(s) Tagged: 3 Thread(s)	MAPerformance aluminum alternator/AC covers Available now! Now available are the billet alternator and A/C covers. These are milled out of a solid piece of billet aluminum, and featured a textured bezel. These are a direct bolt on, and ready to go! Retail will be $99 for the A/C cover, and $79 for the Alt cover, but all FT86 club members will get a special package deal. $149 shipped for both in the continental U.S. Last edited by MAPerformance; 01-17-2014 at 01:32 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
* BRZ / FR-S Aluminum A/C & Alternator Covers *	AREV	Engine, Exhaust, Bolt-Ons	12	07-01-2013 02:40 PM
Protoype BRZ / FR-S Aluminum A/C & Alternator Covers	AREV	Engine, Exhaust, Bolt-Ons	7	06-05-2013 02:15 PM
Purpose of alternator and a/c covers	Turbowned	Engine, Exhaust, Transmission	3	03-03-2013 05:54 PM

12-23-2013, 05:26 PM	#12
MAPerformance Senior Member Join Date: Aug 2012 Drives: Asphalt FRS Location: Cottage Grove, MN Posts: 1,272 Thanks: 669 Thanked 981 Times in 540 Posts Mentioned: 84 Post(s) Tagged: 3 Thread(s)	Got the alternator one completed. Actually turned out awesome! It looks great in person.

12-23-2013, 07:26 PM	#13
Pitman Living the dream Join Date: Jan 2012 Drives: Fensport AVO Turbo GT86 Location: UK Posts: 201 Thanks: 173 Thanked 209 Times in 98 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	They look very good Any idea on pricing and finish that will be available (i.e. anodized, powdercoated, different colors?)

12-23-2013, 07:29 PM	#14
chiefshayan Senior Member Join Date: Mar 2013 Drives: 2013 AT Firestorm FRS Location: Berkeley Posts: 433 Thanks: 185 Thanked 184 Times in 88 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Looks great! Any pricing or estimated arrival?

User Name		Remember Me?
Password