Innovate Motorsports Intercooler System and Upgrade! - Page 11 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Touge_ninja · 11-28-2013, 12:39 AM

Ordered the full kit. Getting it tuned locally

Ryan86 · 11-28-2013, 04:21 AM

Quote:

Originally Posted by Touge_ninja

What type of coolant do you guys use and recommend?

We using the Liqui Molly range of Coolant and lubricants. Subaru approved.

Knickstape · 11-28-2013, 05:35 AM

Quote:

Originally Posted by Touge_ninja

Ordered the full kit. Getting it tuned locally

Drift office??

APS86 · 11-28-2013, 07:54 AM

Hi all, just wondering from anyone who has this kit whether they felt that the OEM engine mounts should be changed and whether it is wise to fit an oil cooler at time of installation???
cheers

Ryan86 · 11-28-2013, 10:01 AM

Quote:

Originally Posted by APS86

Hi all, just wondering from anyone who has this kit whether they felt that the OEM engine mounts should be changed and whether it is wise to fit an oil cooler at time of installation???
cheers

We are in similar climate conditions and my max oil temps have been 127 deg c on a hot day of 34 deg c, been told if temps exceed 130 deg c then fit oil cooler

Engine mounts not an issue at all.

Ryan86 · 11-28-2013, 10:08 AM

Update found another leak, this time coming from the pipe connecting to the manifold into the cooler. Kit has to come off.
Take some pics tomorrow exactly where.

We used carb spray which was excellent in detecting the leak, spray car idles higher where leak located. Soap water did not pick it up.

Hopefully this is it

sw20kosh · 11-28-2013, 11:10 AM

Quote:

Originally Posted by Ryan86

Update found another leak, this time coming from the pipe connecting to the manifold into the cooler.

The what lol? Can you be more specific? Are you taking about an intercooler fitting? Or the bypass chamber? Or?

Touge_ninja · 11-28-2013, 11:17 AM

Quote:

Originally Posted by Knickstape

Drift office??

Yessir

Knickstape · 11-28-2013, 01:36 PM

Quote:

Originally Posted by Touge_ninja

Yessir

Right on, very interested to see what Bob can do

mit_peid · 11-28-2013, 11:50 PM

Is leaking a common phenomenon with this kit and install? I am highly interested in buying it with the inter-cooler, but I'm thinking about having someone else [who knows what they're doing] install and tune it. I was thinking about going out-of-state (FT86speedfactory) to get the kit to save on tax and shipping (and it seems like they may give an additional 2%). Want to pull the trigger in the next six months as I check on these forums daily to check up on your guys' experience with the kit. Hopefully they're get their CARB-approval sometime in the next 6 months too.

xxscaxx · 11-29-2013, 09:12 AM

It seems a lot of people have the issue of the two fittings on the back of the charger leaking, but its a quick easy fix especially with the charger not being installed on the car already.

Lawnik · 11-30-2013, 12:14 PM

Has anyone found a better deal this weekend on the innnercooler kit?

Best I found was 5% off at ft86speedfactory.

xjohnx · 11-30-2013, 12:54 PM

hoping these are back in stock soon...

Touge_ninja · 11-30-2013, 01:23 PM

According to innovate the next batch will ship on first week of december

11-28-2013, 11:50 PM	#150
mit_peid Boosted Noob Join Date: Nov 2012 Drives: '13 FRS MT KW SC, '05 4Runner 4WD Location: SoCal Posts: 883 Thanks: 353 Thanked 343 Times in 175 Posts Mentioned: 7 Post(s)	Is leaking a common phenomenon with this kit and install? I am highly interested in buying it with the inter-cooler, but I'm thinking about having someone else [who knows what they're doing] install and tune it. I was thinking about going out-of-state (FT86speedfactory) to get the kit to save on tax and shipping (and it seems like they may give an additional 2%). Want to pull the trigger in the next six months as I check on these forums daily to check up on your guys' experience with the kit. Hopefully they're get their CARB-approval sometime in the next 6 months too. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovate Motorsports Twin Screw Supercharger System, NOW SHIPPING!	Innovate Motorsports	Forced Induction	577	10-15-2014 12:49 AM
Innovate Motorsports BRZ/FR-S/GT86 Supercharger System Available from Moto-East!	Xero-Limit	Forced Induction	12	03-10-2014 08:56 PM
Innovate Motorsports FR-S/BRZ traction control state modifier module...	mines13	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	20	09-13-2013 01:06 PM
Innovate Motorsports Twin Screw Supercharger Kit for FR-S/BRZ	Innovate Motorsports	Forced Induction	1987	03-13-2013 09:14 PM
FS: Innovate Motorsports OT-2	pixel67	Engine, Exhaust, Bolt-Ons	0	01-05-2013 10:13 AM

11-28-2013, 12:39 AM	#141
Touge_ninja Sending rods to their doo Join Date: Jul 2012 Drives: 700HP STi Location: Seattle WA Posts: 1,927 Thanks: 169 Thanked 541 Times in 369 Posts Mentioned: 49 Post(s)	Ordered the full kit. Getting it tuned locally

11-28-2013, 07:54 AM	#144
APS86 Member Join Date: Aug 2012 Drives: GTS86 Manual Location: Western Australia Posts: 35 Thanks: 38 Thanked 15 Times in 9 Posts Mentioned: 2 Post(s)	Hi all, just wondering from anyone who has this kit whether they felt that the OEM engine mounts should be changed and whether it is wise to fit an oil cooler at time of installation??? cheers

11-28-2013, 10:08 AM	#146
Ryan86 Road Warrior Join Date: Nov 2012 Drives: Toyota 86 Satin Pearl White Location: Durban, South Africa Posts: 1,651 Thanks: 181 Thanked 544 Times in 359 Posts Mentioned: 59 Post(s)	Update found another leak, this time coming from the pipe connecting to the manifold into the cooler. Kit has to come off. Take some pics tomorrow exactly where. We used carb spray which was excellent in detecting the leak, spray car idles higher where leak located. Soap water did not pick it up. Hopefully this is it

11-29-2013, 09:12 AM	#151
xxscaxx Senior Member Join Date: Jul 2012 Drives: 2013 SWP BRZ Location: New York Posts: 2,240 Thanks: 458 Thanked 878 Times in 556 Posts Mentioned: 34 Post(s)	It seems a lot of people have the issue of the two fittings on the back of the charger leaking, but its a quick easy fix especially with the charger not being installed on the car already.

11-30-2013, 12:14 PM	#152
Lawnik Senior Member Join Date: Mar 2012 Drives: Flat grey Toyota 86 Location: Edmonton, AB Posts: 397 Thanks: 545 Thanked 155 Times in 86 Posts Mentioned: 9 Post(s)	Has anyone found a better deal this weekend on the innnercooler kit? Best I found was 5% off at ft86speedfactory.

11-30-2013, 12:54 PM	#153
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,717 Times in 1,031 Posts Mentioned: 45 Post(s)	hoping these are back in stock soon...

11-30-2013, 01:23 PM	#154
Touge_ninja Sending rods to their doo Join Date: Jul 2012 Drives: 700HP STi Location: Seattle WA Posts: 1,927 Thanks: 169 Thanked 541 Times in 369 Posts Mentioned: 49 Post(s)	According to innovate the next batch will ship on first week of december

User Name		Remember Me?
Password