*** Aggressive wheels? Post them up! *** Thread - Page 62 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sikkwidit · 11-19-2013, 09:06 AM

My Wheels. 😁

nab335 · 11-19-2013, 01:17 PM

@Frs123 yeah the tabs should be grinded down unless you want to risk tearing up your tire haha.

Quote:

Originally Posted by SmsAlSuwaidi

Id like your opinion guys, im raising the car after 2 months or so to follow my turbo build and want to go lower and add spacers for now maybe ?
@SLICVIC what sized spacers would you recommend ? wheels are 9.5+25

I'm no vic but i do have the same size width wheels. All depends on how much fender pull/roll, stretch, and you have and camber man. Also if you're trying to poke more or tuck. I have +34s and was able to fit +8 a few months back. 26mm spacers on 6 degrees camber just on LCAs.

When I maxed out my UCAs with 10 degrees I was able to fit -1. My current setup which was my goal in terms of looks is at 8 degrees camber running +4 but I have a some more room to make it super snug.

I would stick with 15-20 mm to be safe since your wheels are more aggressive and just go up from there.

mr. slim · 11-19-2013, 01:37 PM

I have a surprise for you guys later

This thread is the best!

JdelFrs · 11-22-2013, 03:34 PM

I am preparing to order custom wheels

18x9 +3 & 18x9.5 +0

Stay tuned

nab335 · 11-22-2013, 09:02 PM

Quote:

Originally Posted by JdelFrs

I am preparing to order custom wheels

18x9 +3 & 18x9.5 +0

Stay tuned

good luck on it man it'll work out pretty well since you said your on bags. is that why your going with 9s in the front?

PradiG · 11-22-2013, 09:23 PM

Quote:

Originally Posted by mr. slim

I have a surprise for you guys later

This thread is the best!

bro you already told me youre getting those new XXR Twerk Equips....not much of a surprise!

JdelFrs · 11-22-2013, 09:45 PM

Quote:

Originally Posted by nab335

good luck on it man it'll work out pretty well since you said your on bags. is that why your going with 9s in the front?

Yea

i wanted a look staggered! and i dont want to strecth that much too! so i would wrap them in 215/40 for the 9'' & 225/40 for 9.5''. Yea i would like to finish at -6 with my stance LCA since i am not looking to change my UCA. Ill post a pic of my set of wheels when ill be sure on spec :P maybe in rear ill go with a +8 just to be sure!

nab335 · 11-23-2013, 01:05 AM

Quote:

Originally Posted by JdelFrs

Yea

i wanted a look staggered! and i dont want to strecth that much too! so i would wrap them in 215/40 for the 9'' & 225/40 for 9.5''. Yea i would like to finish at -6 with my stance LCA since i am not looking to change my UCA. Ill post a pic of my set of wheels when ill be sure on spec :P maybe in rear ill go with a +8 just to be sure!

less aggressive is better if you want to be safe..you can always get spacers! thats a perfect amount of camber for 9.5inch wheels..I noticed any more camber than -8 degrees looks a bit awkward on wheels smaller than 10.5inch. Anyways, stoked to see what wheels you have planned.

JdelFrs · 11-23-2013, 01:12 PM

Quote:

Originally Posted by nab335

less aggressive is better if you want to be safe..you can always get spacers! thats a perfect amount of camber for 9.5inch wheels..I noticed any more camber than -8 degrees looks a bit awkward on wheels smaller than 10.5inch. Anyways, stoked to see what wheels you have planned.

Yea i see what you're saying :P ! Here is a sneak peak of wheels

WCI MD1

i loved them

PS : Polish face

Jeeper_x · 11-23-2013, 01:42 PM

Quote:

Originally Posted by JdelFrs

I am preparing to order custom wheels

18x9 +3 & 18x9.5 +0

Stay tuned

9.5 +0 whoa.....you're a brave man.....

WolfsFang · 11-24-2013, 03:28 AM

So much fapping to do. Also what counts as aggressive? Does my 16x9.5+16 count?

671ft86 · 11-24-2013, 05:06 AM

Quote:

Originally Posted by Turboxer

OMG!!! Someone stole my idea! lol.

me too...i was thinking of doing that too.oh well shit looks sick i will still do it.haha

SmsAlSuwaidi · 11-24-2013, 02:44 PM

Sent from my IBrick

nab335 · 11-24-2013, 04:21 PM

@JdelFrs those are badass!

Quote:

Originally Posted by SmsAlSuwaidi

Sent from my IBrick

LOL nice bro!

11-19-2013, 09:06 AM	#855
Sikkwidit Member Join Date: Jan 2013 Drives: 2013 FR-S Location: Eastern Panhandle, WV Posts: 12 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	My Wheels. 😁 Attached Images

11-19-2013, 01:37 PM	#857
mr. slim SoCal86 Join Date: May 2012 Drives: '13 Whiteout FR-S Location: Los Angeles Posts: 576 Thanks: 354 Thanked 191 Times in 103 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	I have a surprise for you guys later This thread is the best! __________________ .: SUPER KAWAII :. .: BUBSQUAD :. .: LivinLow :. .: FRS86 :.

11-24-2013, 03:28 AM	#865
WolfsFang Scrape Master Join Date: Jun 2012 Drives: Goal: Oldest FRS State Side Location: North NJ Posts: 1,161 Thanks: 238 Thanked 412 Times in 238 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	So much fapping to do. Also what counts as aggressive? Does my 16x9.5+16 count? __________________ You do realize comparing the BRZ to the FR-S is like comparing which hand you love masterbating too right?

11-24-2013, 02:44 PM	#867
SmsAlSuwaidi Boosted Join Date: Feb 2013 Drives: Not a supra....yet Location: Riverside,CA/ Abu Dhabi,UAE Posts: 2,925 Thanks: 487 Thanked 1,203 Times in 812 Posts Mentioned: 90 Post(s) Tagged: 2 Thread(s)	Sent from my IBrick Attached Images __________________ https://www.facebook.com/Smsalsuwaidiracing/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post the Wheels You want On your FRS/BRZ!!	Zaku	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1738	10-11-2017 05:29 PM
RPF1 and PF01 aggressive fitment size requests	Crossover Auto	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	12	10-22-2012 03:30 PM
post VIN with any problem thread?	fistpoint	Issues \| Warranty \| Recalls / TSB	0	10-04-2012 11:11 PM
Do aggressive offsets cause more debris to kick up into the paint?	switchlanez	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	7	09-26-2012 11:03 PM
Scion FR-S / Toyota FT-86 / Subaru with Aggressive Body & High Wing! + VIDEO!	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	538	06-15-2011 03:20 AM

11-22-2013, 03:34 PM	#858
JdelFrs Senior Member Join Date: Oct 2013 Drives: 2013 Fr-S Release Series 10 (MT6) Location: Canada Posts: 107 Thanks: 0 Thanked 72 Times in 33 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I am preparing to order custom wheels 18x9 +3 & 18x9.5 +0 Stay tuned

User Name		Remember Me?
Password