Innovate (Sprintex) Supercharger Owners Topic - Page 142 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

KSpider · 10-19-2013, 02:18 AM

[quote=Freeman;1279697]

Quote:

Originally Posted by KSpider

Here are the IC vs. Non IC graphs:

Thanks. Now I need to find an extra $4200 laying around.....

sent from my locker... help!

Just ordered the full kit, sold the treadmill and my stock wheels/tires yesterday, what great timing!

Freeman · 10-19-2013, 02:19 AM

[quote=KSpider;1279698]

Quote:

Originally Posted by Freeman

Just ordered the full kit, sold the treadmill and my stock wheels/tires yesterday, what great timing!

Hmmmm, you sir just gave me an idea. Thank you once more!

sent from my locker... help!

Xero-Limit · 10-19-2013, 11:39 AM

JDL Header, 3" cone filter intake.

[ame="http://www.youtube.com/watch?v=oN9oltJNzeY"]Subaru BRZ with JDL Header, Perrin Front/Overpipe, Moto-East catback, Innovate SC In-car Sound - YouTube[/ame]

OmarGC · 10-21-2013, 07:43 PM

Hey anyone looking to buy the Innovate s/c on a bit of a discount hit me up, I'm working on getting a GB going through a shop I have small ties with.

lbroskee · 10-21-2013, 07:47 PM

Quote:

Originally Posted by OmarGC

Hey anyone looking to buy the Innovate s/c on a bit of a discount hit me up, I'm working on getting a GB going through a shop I have small ties with.

most ppl now are gonna be wanting a stage 2

Area86 · 10-22-2013, 06:29 PM

OK got another question for you guys. I have the FA20club IAT relocation plate and I was going to tap into it to make a port for a boost gauge but its pretty tight on space and I don't want to mess it up. Would I be able to make a "T" off the port where the IAT sensor goes or would that screw up the accuracy of temp readings??

Sent from my DROID RAZR using Tapatalk 2

xjohnx · 10-22-2013, 06:33 PM

Quote:

Originally Posted by Area86

OK got another question for you guys. I have the FA20club IAT relocation plate and I was going to tap into it to make a port for a boost gauge but its pretty tight on space and I don't want to mess it up. Would I be able to make a "T" off the port where the IAT sensor goes or would that screw up the accuracy of temp readings??

Sent from my DROID RAZR using Tapatalk 2

good question. I was looking for a boost source for my AEM failsafe wideband recently and that would be great if it worked.

the.big.kahoona · 10-22-2013, 07:07 PM

Quote:

Originally Posted by OmarGC

Hey anyone looking to buy the Innovate s/c on a bit of a discount hit me up, I'm working on getting a GB going through a shop I have small ties with.

Depends on the discount

Area86 · 10-22-2013, 07:24 PM

Quote:

Originally Posted by xjohnx

good question. I was looking for a boost source for my AEM failsafe wideband recently and that would be great if it worked.

This is what I have in mind. I might give it a shot and see if it works. Worst case I can always change it back.

Sent from my DROID RAZR using Tapatalk 2

xjohnx · 10-22-2013, 10:41 PM

Quote:

Originally Posted by Area86

This is what I have in mind. I might give it a shot and see if it works. Worst case I can always change it back.

Sent from my DROID RAZR using Tapatalk 2

if you can get me a parts list i can give it a shot since i have one tune that supports the iat already.

Calum · 10-22-2013, 11:34 PM

Quote:

Originally Posted by xjohnx

if you can get me a parts list i can give it a shot since i have one tune that supports the iat already.

Just looking at the pic, I'm pretty sure it's as follows.

1) T with 1/2 in NPT threads on all three ports
2) Double male 1/2 in NPT adapter
3) 1/2 in NPT to 3/8 in NPT adapter
4) 3/8 in NPT to 1/8 in hose adapter

Add in Teflon tape and DO NOT tape below the second last thread from the opening.

*3) could be eliminated if you either you get a 1/2 in NPT to 1/8 in hose adapter, or get a T with 1/2 in NPT on two sides and 3/8 in NPT on one side.

xjohnx · 10-22-2013, 11:54 PM

Quote:

Originally Posted by Calum

Just looking at the pic, I'm pretty sure it's as follows.

1) T with 1/2 in NPT threads on all three ports
2) Double male 1/2 in NPT adapter
3) 1/2 in NPT to 3/8 in NPT adapter
4) 3/8 in NPT to 1/8 in hose adapter

Add in Teflon tape and DO NOT tape below the second last thread from the opening.

*3) could be eliminated if you either you get a 1/2 in NPT to 1/8 in hose adapter, or get a T with 1/2 in NPT on two sides and 3/8 in NPT on one side.

Would this work?

1 - 1/2" Threaded NPT Tee
2 - Qty 2 of these - 1/2" Threaded NPT Hexagon Nipple
3 - 1/2" x 1/8" Threaded NPT Reducer
4 - 1/8" Threaded NPT x 1/8" Hose Nipple

Area86 · 10-23-2013, 02:24 AM

I will get you the list of what I picked up when I get home from work. My car is tuned for the IAT kit as well so I will test it out tomorrow morning and let you know how it turns out.

Sent from my DROID RAZR using Tapatalk 2

ntaphse · 10-23-2013, 02:27 AM

Quote:

Originally Posted by Calum

Just looking at the pic, I'm pretty sure it's as follows.

1) T with 1/2 in NPT threads on all three ports
2) Double male 1/2 in NPT adapter
3) 1/2 in NPT to 3/8 in NPT adapter
4) 3/8 in NPT to 1/8 in hose adapter

Add in Teflon tape and DO NOT tape below the second last thread from the opening.

*3) could be eliminated if you either you get a 1/2 in NPT to 1/8 in hose adapter, or get a T with 1/2 in NPT on two sides and 3/8 in NPT on one side.

1/2" NPT is huge. Pretty sure that's 1/4" NPT to 1/8" NPT for the barb.

10-19-2013, 11:39 AM	#1977
Xero-Limit Join Date: Nov 2012 Drives: JDL Turbo FRS, 335SC BRZ (ret) Location: Lehigh Valley, PA Posts: 938 Thanks: 368 Thanked 1,550 Times in 527 Posts Mentioned: 380 Post(s) Tagged: 6 Thread(s)	JDL Header, 3" cone filter intake. [ame="http://www.youtube.com/watch?v=oN9oltJNzeY"]Subaru BRZ with JDL Header, Perrin Front/Overpipe, Moto-East catback, Innovate SC In-car Sound - YouTube[/ame] Last edited by Xero-Limit; 10-19-2013 at 03:13 PM.

10-21-2013, 07:43 PM	#1978
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	Hey anyone looking to buy the Innovate s/c on a bit of a discount hit me up, I'm working on getting a GB going through a shop I have small ties with. __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 11:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 07:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 01:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-18-2012 12:38 AM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 06:14 PM

10-22-2013, 06:29 PM	#1980
Area86 Senior Member Join Date: Jul 2012 Drives: 2013 BRZ limited SWP Location: USA Posts: 338 Thanks: 94 Thanked 166 Times in 99 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	OK got another question for you guys. I have the FA20club IAT relocation plate and I was going to tap into it to make a port for a boost gauge but its pretty tight on space and I don't want to mess it up. Would I be able to make a "T" off the port where the IAT sensor goes or would that screw up the accuracy of temp readings?? Sent from my DROID RAZR using Tapatalk 2

10-23-2013, 02:24 AM	#1987
Area86 Senior Member Join Date: Jul 2012 Drives: 2013 BRZ limited SWP Location: USA Posts: 338 Thanks: 94 Thanked 166 Times in 99 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	I will get you the list of what I picked up when I get home from work. My car is tuned for the IAT kit as well so I will test it out tomorrow morning and let you know how it turns out. Sent from my DROID RAZR using Tapatalk 2

User Name		Remember Me?
Password