JPxM0Dz WRB BRZ Photo Shoot #1

[JPxM0Dz]

Originally Posted by Turbowned

I wanna see pics of that CF rear deck cover installed! Is the CF airbox just a cover for the afe/takeda intake or is it a complete CF airbox?

The CF airbox most definitely resembles the AFe and Greddy intake box and is obviously a direct replica made by LITESPEED RACING. It is not a cover, but direct replacement airbox and from what I understand is one of a kind including the titanium intake pipe. I bought both from a forum member recently.

If it were socially acceptable, I would drape myself in Titanium and Carbon fiber

Here's another shot of the intake...

[tailspin]

Originally Posted by JPxM0Dz

Fortune 510's w/Radial Bearing Upgrade & Swift Springs 7K all around I believe

The XD9's are 18 x 8 square, can't remember the offset...

[Apex_BRZ]

What's is that with the two clear hoses on either side of it, mounted on the firewall above the Intake manifold cover and behind the strut tower bar?

[JPxM0Dz]

Originally Posted by Apex_BRZ

What's is that with the two clear hoses on either side of it, mounted on the firewall above the Intake manifold cover and behind the strut tower bar?

First of all, that's not my engine bay, pic is from guy I bought Intake from.

The hoses you are referring to are from the Cusco Oil catch can

[Curtis]

Boom. What a sick car, can't believe we live in the same province and I haven't seen her yet haha

[JPxM0Dz]

Originally Posted by Curtis

Boom. What a sick car, can't believe we live in the same province and I haven't seen her yet haha

Curtis are you S'toon or the Queens City ?

[Curtis]

Work in Kindersley, live in saskatoon.

But im rarely in Saskatoon, oil is booming! Haha

[Nitesh31]

Originally Posted by JPxM0Dz

I like my STi badge

If I remove the badge, I might as well remove all my STi parts while I'm at it, but I won't! Hey I'm having fun and that's all that's matters

If it's any consolation, the STi badge is genuine lol

I'm glad this isn't Nasoic- the topic of STi badges on a non STi car starts wars. Atleast it's genuine

It's your car and you do as you please with it, I think you atleast need some more STi parts to rock the badge.

Is that a shift knob from another STi model? I haven't seen it on the BRZ STi concepts or the Ts model.

[JPxM0Dz]

Originally Posted by Nitesh31

I'm glad this isn't Nasoic- the topic of STi badges on a non STi car starts wars. Atleast it's genuine

It's your car and you do as you please with it, I think you atleast need some more STi parts to rock the badge.

Is that a shift knob from another STi model? I haven't seen it on the BRZ STi concepts or the Ts model.

I believe it was intended for the WRX STi as it came with an opposite 6 speed shift pattern badge. Also came from Japan and is genuine TI STi shift knob

I plan on more STi goodness including front lip, side skirts and rear spats

Sent from my GT-I9500 using Tapatalk 4

[JPxM0Dz]

Well my Litespeed intake showed up today and I didn't waste anytime installing it. Installation was pretty straight forward, did a sound tube delete at the same time. Word of warning, this intake is not for the faint of heart. The MAF sensor needs to be slightly modified to fit and sit down properly inside the intake tube. This required digging out my handy dremel and notching out a small piece just under one of the screw locations on the sensor itself and also around the outer perimeter of the sensor so it would fit down into the hole nice and snug. Trying to bore out the actual hole inside the intake tube proved to be impossible with my dremel. Titanium is freaking tuff! Basically all my dremel did was polish the welds lol. This is obviously a design flaw by Litespeed Racing, but then again, there has only been a handful of these things made so far and their still in development.

Here's a few pics of the intake in all her glory...

[Kelbyat07]

Loving the mods especially the engine. What kind of exhaust do you have?

[Moetivegt86]

That intake is so boss! I like the titanium & carbon fiber look. And I actually like the sti badges, Keep it up man! Be different.

[JPxM0Dz]

Originally Posted by Kelbyat07

Loving the mods especially the engine. What kind of exhaust do you have?

AFe catback, Motive catted front pipe and overpipe. UEL headers coming soon...

Sent from my GT-I9500 using Tapatalk 4

[Kelbyat07]

Originally Posted by JPxM0Dz

AFe catback, Motive catted front pipe and overpipe. UEL headers coming soon...

Sent from my GT-I9500 using Tapatalk 4

How does it sound so far? The headers will make it sound even awesome I am sure.