Best Custom Fit Subwoofer Enclosure.

[NYCsubaruBRZ]

250 is a good price. i will be selling my custom rear seat delete sub boxes for about 350 each

[NYCsubaruBRZ]

integrity looks like a good box. should be a solid product.

any ported ones?

[boarder1995]

Here's the box, without driver, in my trunk. It's a great looking box, quite solid, not too heavy, and fits nicely in the contoured corner. I'm still not fully decided if I want a sub in the trunk, nor is my wife, but if I do I'd use this box for the $250 I paid - a good setup from initial indications. Here's a bunch of pics of the fit...

[WolfSongX]

Looks good in the pics... you'd give it a thumbs up then?

[boarder1995]

Originally Posted by WolfSongX

Looks good in the pics... you'd give it a thumbs up then?

Yep - definitely a thumbs up for me. I still need to decide if I want to keep it and do an audio install. It seems easy to put in/out and will require some minimal restraining mechanism. I may run with it in the trunk a while to see if we miss the corner space.

I'd really like to see this company's 8" enclosure now too, to see if it's much smaller. Perhaps I'll purchase one of those now too!

For reference, here's the enclosure website again...
http://customsubenclosures.com/produ...fer-enclosure/

[Integrity Concepts]

Originally Posted by Thongpocket

How much are these others? Because $250 is a great price.

Our current prices on our 4 enclosure models are:

$279.95 - 8" Driver side enclosure - On a 20% off pre order sale while production mold is being constructed.

$279.95 - 8" Passenger side enclosure - On a 20% off pre order sale while production mold is being constructed.

$299.95 - 10" Driver side enclosure - On a 20% off pre order sale while production mold is being constructed.

$339.95 - 10" Passenger side enclosure - On a 10% off introductory sale after market release in July (pictured below with optional press fit grill and trim ring).



.

[k0tkmnd]

I bought one of the customsubenclosure boxes recently. Nice build quality but no way to secure it. Vendor recommended velcro or screws. Haven't had alot of luck with the velcro so far. The velcro just won't stay stuck, though I haven't resorted to a liquid adhesive to adhere patches to the box and interior panel yet. Box also doesn't sit flat on the floor so I'm using a roll of tape under the front ring to prop it up snug into the corner. With the flexibility of the interior panel, I'm not so sure about leaving it secured purely to that anyway.

Was contemplating using the existing body clip holes behind the wheel well that the box snugs into. Secure in two bolts sticking out as studs, put matching holes in the box and essentially bolt the box to the wheel well. Not sure if two would be sufficient, but the whole thing weighs so little even with a sub that I don't think I should worry too much. Would be an absolute pita to remove though.

Opinions/ideas?

Does sound very nice, pretty much what I was hoping for, not too boomy or punchy. Running a pioneer ts-w260d4 off an alpine mrx-v70.

Sent from my Note 2 using Tapatalk

[Yosty]

all i keep seeing was 8"or`10" i said why not 2 12" i have them all i need to do is make a box.. being 21 and never making a box before i think these came out look BA!!!

[DC2R]

Originally Posted by k0tkmnd

I bought one of the customsubenclosure boxes recently. Nice build quality but no way to secure it. Vendor recommended velcro or screws. Haven't had alot of luck with the velcro so far. The velcro just won't stay stuck, though I haven't resorted to a liquid adhesive to adhere patches to the box and interior panel yet. Box also doesn't sit flat on the floor so I'm using a roll of tape under the front ring to prop it up snug into the corner. With the flexibility of the interior panel, I'm not so sure about leaving it secured purely to that anyway.

Was contemplating using the existing body clip holes behind the wheel well that the box snugs into. Secure in two bolts sticking out as studs, put matching holes in the box and essentially bolt the box to the wheel well. Not sure if two would be sufficient, but the whole thing weighs so little even with a sub that I don't think I should worry too much. Would be an absolute pita to remove though.

Opinions/ideas?

Does sound very nice, pretty much what I was hoping for, not too boomy or punchy. Running a pioneer ts-w260d4 off an alpine mrx-v70.

Sent from my Note 2 using Tapatalk

Site is down. What is internal volume?

[xFury]

Originally Posted by WiKKiD

Went with this subwoofer.

http://www.daytonaudio.com/index.php...-per-coil.html

And this amp

http://amzn.com/B00BMR7UPS

Man, hope you're using a large cubic enclosure for those, that's where it performs best! Small box ain't gonna cut it. Was gonna go for that one also, but the guys at the car audio says to get a large enclosure for it to get the full performance. But if it works for ya, hey that's good! I am jelly lol

[DC2R]

Same. I really want something custom but even the one 10 inch I have wants 1 cubic foot. Custom enclosures(company)'s is something like .88 cubic feet.