Raven FRS: Heartbreaker - Page 9 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

TylerLieberman · 08-22-2013, 01:54 PM

For sure, thanks for the subscribe! Nice to see people enjoy my build thread.

Updates:

Got in touch with the guys from CounterSpace Garage and picked up one of the leftover sets of RPF1s available from the group buy. 17x9 +35 in SBC

. I had every intention of waiting and picking up some XD9s or Kiwami's but I've always loved RPF1s but I wanted them in SBC and 17s. The opportunity came up at the right time, so I jumped on it without hesitation. Those should be here sometime in October.

Also went to Mt Scott & the refuge this past weekend and took some pictures. These are just a few, I'll post more later. Also, if you want anything in wallpaper size, just PM me which pic and what size you want and I'll send it.

Trying to hit up another event in November but we'll see what happens. Just want to get in one more event before the end of the year. Next year though, BIG PLANS. Looking at somewhere around 15 different events between 3-4 states next year

It's gonna be busy.

Also, updating the first post now along with spec sheet so if you're curious about any parts or setups, just check there.

xXDeathMaliCeXx · 08-22-2013, 02:16 PM

For some reason I'm not sub'd to your build?! Well I definitely am now. Great looking car. I've been debating getting a set of XXR 527's but in 18" I'm just skeptical about the XXR brand and I've never been a fan of 5x100/114.3 on the same wheel.

But seeing them on your car makes me consider them even more lol. Can't wait to see your updates for next year!

TylerLieberman · 08-24-2013, 12:57 AM

A few more shots from the weekend:

Getting some LCAs and an alignment soon. Also going to get some 15mm spacers for the front. Running too much camber for the rear (around -2 or so) and I want to get down as close to -1 as possible. Also going to zero out my toe all around.

For front camber, I'm looking for somewhere around -2.5 to -3. That's what I ran at the track for the last event and it worked really well.

Jdogg88 · 08-24-2013, 02:13 PM

I hope my raven will look half as good as yours one day dude. How do you like the stance coils? Thinking about those with the lca pack from @ft86speedfactory or pbms

TylerLieberman · 08-26-2013, 03:52 PM

Quote:

Originally Posted by Jdogg88

I hope my raven will look half as good as yours one day dude. How do you like the stance coils? Thinking about those with the lca pack from @ft86speedfactory or pbms

Thanks

Love 'em.

I'm getting SPC arms. I only need to go from -2 to like -1 for rear camber. SPC arms can do that easy. The Stance arms are legit though. I just don't want to spend that much for arms.

TylerLieberman · 09-06-2013, 09:36 PM

Got some clear side markers a while back. Also got some SPC LCA's. Threw the markers on last weekend and the arms on today. Didn't swap toe link bushings. Managed to get rid of a lot of camber though which is great.

New specs:

Front
Caster: 5.9
Camber: -3.0
Toe: 0.0

Rear:
Camber: -1.3
Toe: 0.07

PS. Enjoy the sticker on the wing

RIPTRD71 · 09-07-2013, 05:27 PM

Car looks amazing sir! I am shooting for the same stance you have on my Raven! Oh yeah, where did you purchase the "TWERK IT, MILEY." sticker at? I need one now!

TylerLieberman · 09-07-2013, 07:04 PM

Event at Mineral Wells airport in Texas tomorrow. Starts @10am.

Like $5 or $10 to spectate. Drifting is FREE! If you wanna go, bring a helmet to get ride alongs.

I'll be there all day testing out the new setup

TylerLieberman · 09-09-2013, 12:39 PM

More driving

[ame="http://vimeo.com/74109644"]FR-S Drift Mineral Wells on Vimeo[/ame]

fatpwr · 09-09-2013, 11:32 PM

i read the whole thread up so far. very informative post in here. especially someone that's doing quite a bit of drifting! sub'd!

TylerLieberman · 09-11-2013, 08:38 AM

We had a blast at the event in Mineral Wells on Sunday. Got a bunch of seat time and got to really get a feel for the car with the new alignment setup. The car is amazing now. So much grip, I had to get used to it and drive a bit more aggressively at first. The car goes exactly where you want it to. You can throw the car to full lock and just hold it while steering the car more so with the throttle.

I'm pretty happy with this year overall. Started with a bone stock car and managed to get it to a really good setup with lots of parts and changes and got 3 events in all within a 5 month span.

Only thing I'm upset about is that I'm done for the rest of the season. Prepping the car for next year. Loads of changes: new wheel setup, further suspension changes, steering knuckles etc. 2014 is going to be awesome

Shopian · 09-12-2013, 01:45 AM

Car looks good and drift looks even more good. As for the spc arms, which models did you use? The 'newer' ones is it? Considering to get myself 1 as well

Sent from my iPhone using Tapatalk - now Free

Mike @ MRP · 09-15-2013, 01:57 AM

Quote:

Originally Posted by TylerLieberman

More driving

Very impressive. Especially for being na. It's not easy to keep these things sideways with the lack of torque we got.

Enraged21 · 09-15-2013, 10:14 AM

Definitely wanna see how you stance the RPF1's. What tire size you plan on going with them?

08-22-2013, 01:54 PM	#113
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,686 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	For sure, thanks for the subscribe! Nice to see people enjoy my build thread. Updates: Got in touch with the guys from CounterSpace Garage and picked up one of the leftover sets of RPF1s available from the group buy. 17x9 +35 in SBC. I had every intention of waiting and picking up some XD9s or Kiwami's but I've always loved RPF1s but I wanted them in SBC and 17s. The opportunity came up at the right time, so I jumped on it without hesitation. Those should be here sometime in October. Also went to Mt Scott & the refuge this past weekend and took some pictures. These are just a few, I'll post more later. Also, if you want anything in wallpaper size, just PM me which pic and what size you want and I'll send it. Trying to hit up another event in November but we'll see what happens. Just want to get in one more event before the end of the year. Next year though, BIG PLANS. Looking at somewhere around 15 different events between 3-4 states next year It's gonna be busy. Also, updating the first post now along with spec sheet so if you're curious about any parts or setups, just check there. __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

08-24-2013, 12:57 AM	#115
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,686 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	A few more shots from the weekend: Getting some LCAs and an alignment soon. Also going to get some 15mm spacers for the front. Running too much camber for the rear (around -2 or so) and I want to get down as close to -1 as possible. Also going to zero out my toe all around. For front camber, I'm looking for somewhere around -2.5 to -3. That's what I ran at the track for the last event and it worked really well. __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

09-06-2013, 09:36 PM	#118
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,686 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Got some clear side markers a while back. Also got some SPC LCA's. Threw the markers on last weekend and the arms on today. Didn't swap toe link bushings. Managed to get rid of a lot of camber though which is great. New specs: Front Caster: 5.9 Camber: -3.0 Toe: 0.0 Rear: Camber: -1.3 Toe: 0.07 PS. Enjoy the sticker on the wing __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

09-07-2013, 07:04 PM	#120
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,686 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	Event at Mineral Wells airport in Texas tomorrow. Starts @10am. Like $5 or $10 to spectate. Drifting is FREE! If you wanna go, bring a helmet to get ride alongs. I'll be there all day testing out the new setup __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

09-09-2013, 12:39 PM	#121
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,686 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	More driving [ame="http://vimeo.com/74109644"]FR-S Drift Mineral Wells on Vimeo[/ame] __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

08-24-2013, 02:13 PM	#116
Jdogg88 Senior Member Join Date: Apr 2013 Drives: Sapphire Blue ‘23 Location: Music City, Tn Posts: 101 Thanks: 90 Thanked 42 Times in 27 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	I hope my raven will look half as good as yours one day dude. How do you like the stance coils? Thinking about those with the lca pack from @ft86speedfactory or pbms

09-09-2013, 11:32 PM	#122
fatpwr Member Join Date: Jun 2013 Drives: 2013 Raven FRS Location: WI Posts: 51 Thanks: 4 Thanked 9 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i read the whole thread up so far. very informative post in here. especially someone that's doing quite a bit of drifting! sub'd!

09-11-2013, 08:38 AM	#123
TylerLieberman Senior Member Join Date: Dec 2011 Drives: '24 GR86 Location: Arizona Posts: 3,686 Thanks: 658 Thanked 3,363 Times in 1,584 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	We had a blast at the event in Mineral Wells on Sunday. Got a bunch of seat time and got to really get a feel for the car with the new alignment setup. The car is amazing now. So much grip, I had to get used to it and drive a bit more aggressively at first. The car goes exactly where you want it to. You can throw the car to full lock and just hold it while steering the car more so with the throttle. I'm pretty happy with this year overall. Started with a bone stock car and managed to get it to a really good setup with lots of parts and changes and got 3 events in all within a 5 month span. Only thing I'm upset about is that I'm done for the rest of the season. Prepping the car for next year. Loads of changes: new wheel setup, further suspension changes, steering knuckles etc. 2014 is going to be awesome __________________ Old 2013 FRS Build Thread (SOLD) Hakone 86 GR Build Thread (SOLD)

09-12-2013, 01:45 AM	#124
Shopian Junior Member Join Date: Aug 2013 Drives: Toyota 86 Location: Brunei Darussalam Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Car looks good and drift looks even more good. As for the spc arms, which models did you use? The 'newer' ones is it? Considering to get myself 1 as well Sent from my iPhone using Tapatalk - now Free

09-15-2013, 10:14 AM	#126
Enraged21 #RememberTheBuster Join Date: Aug 2012 Drives: Firestorm FRS MT Location: Orlando, FL Posts: 597 Thanks: 637 Thanked 154 Times in 102 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Definitely wanna see how you stance the RPF1's. What tire size you plan on going with them?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KO's Raven FR-S Build: Name "Raven12s"	KO	Member's Car Journals	3	07-18-2013 03:09 AM
WORK KIWAMI 18" x 9.5" + 18" x 8.5" +38 Offset	GC GTS Aero Kit	Australia Classifieds	16	03-22-2013 06:49 AM
Which Markets have "GT86" and "Toyota" badges on trunk?	Tanuki	Scion FR-S / Toyota 86 GT86 General Forum	20	02-10-2013 06:23 PM
Anyone else try running "square" tires on "staggered" wheels?	hamlet	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	21	12-19-2012 01:59 PM
Five Axis Spoiler - Painted "RAVEN" Black	that_guy	Canada Classifieds	29	12-18-2012 09:34 AM

User Name		Remember Me?
Password