Raceseng | Revo Engine Pulley Product Release

[xjohnx]

I knew that R looked familiar:



Can't wait to get my hands on one of these.

[Raceseng]

LOL! That is awesome!

Originally Posted by xjohnx

I knew that R looked familiar:



Can't wait to get my hands on one of these.

[Raceseng]

What thread did you find that image from?

Originally Posted by xjohnx

I knew that R looked familiar:



Can't wait to get my hands on one of these.

[lbroskee]

Originally Posted by xjohnx

I knew that R looked familiar:



Can't wait to get my hands on one of these.

is that the stock pulley for it?

[xjohnx]

Originally Posted by Raceseng

What thread did you find that image from?

http://www.ft86club.com/forums/showt...t=41126&page=8

Was this like a game of hide and seek? Let me know if you need my address to send me my 70mm innovate pulley prize!

[xjohnx]

Originally Posted by lbroskee

is that the stock pulley for it?

Nope. That one is 70mm, stock is 75mm (I believe.)

[Raceseng]

Nope, it is the Raceseng small diameter "more boost" pulley for the Innovate SC kit!

Originally Posted by lbroskee

is that the stock pulley for it?

[lbroskee]

Originally Posted by Raceseng

Nope, it is the Raceseng small diameter "more boost" pulley for the Innovate SC kit!

with everything he jus got from u i cant wait to see what hes getting. especially if he intercools it too

[Raceseng]

Seriously, I'm impressed that you noticed the Raceseng Apex R on the pulley picture. Do you have an SC kit?

If so, the pulley will be able to be purchased soon. Mike Mann at Moto-East approached us to develop a small diameter pulley for the SC kit. We went from design to prototypes in 2 days! He is doing the testing now.

Originally Posted by xjohnx

http://www.ft86club.com/forums/showt...t=41126&page=8

Was this like a game of hide and seek? Let me know if you need my address to send me my 70mm innovate pulley prize!

[lbroskee]

2 day?! now that is impressive. that def gets my hopes up about the other 2 pulleys

Originally Posted by Raceseng

Seriously, I'm impressed that you noticed the Raceseng Apex R on the pulley picture. Do you have an SC kit?

If so, the pulley will be able to be purchased soon. Mike Mann at Moto-East approached us to develop a small diameter pulley for the SC kit. We went from design to prototypes in 2 days! He is doing the testing now.

[Efferalgan]

Originally Posted by cslntuee

HI,

I also have GFB set already, so I plan to do the same thing like you

(GFB's 3-pulley set + 2 Raceseng idler )

Is there any issue to do the mismatch?

I just wondering there has some balance design in it or not.

Thanks a lot.

Well, since you've already installed a crank pulley which is 5x lighter and 2 other pulleys which are circa. 2x lighter than stock, I doubt you will notice any difference after adding 2 additional idlers which are just 20% or so lighter than stock

[xjohnx]

Originally Posted by Raceseng

Seriously, I'm impressed that you noticed the Raceseng Apex R on the pulley picture. Do you have an SC kit?

If so, the pulley will be able to be purchased soon. Mike Mann at Moto-East approached us to develop a small diameter pulley for the SC kit. We went from design to prototypes in 2 days! He is doing the testing now.

Yep, i do have the innovate kit, along with tunes from @moto-mike at Moto-East and William at @DeliciousTuning (who i know has also been developing a 70mm tune). I've actually been talking to Mike about getting one of the pulleys (in hopes of getting one of the initial batch), but I think he's good on testers for now, damn!

[swift996]

Originally Posted by Raceseng

Seriously, I'm impressed that you noticed the Raceseng Apex R on the pulley picture. Do you have an SC kit?

If so, the pulley will be able to be purchased soon. Mike Mann at Moto-East approached us to develop a small diameter pulley for the SC kit. We went from design to prototypes in 2 days! He is doing the testing now.

Any idea of when they will be available? Will they come with both 70 & 72.5mm sizes or are they going to be individually offered?

[oso_25]

Originally Posted by Optimus Prime

Stupid question here. I've been looking in to pulleys (specifically crank) for a few days now; HOWEVER, due to my wife not being able to drive stick, I've got an auto. I can't seem to find an answer to the question whether these will easily still bolt up with auto and whether it would even make a difference.

Found a thread on nasioc where it was basically stated pulleys aren't worthwhile on autos due to how they work. I won't lie. It was all above my head as I'm not much of a gearhead.

x2 I also have a auto and would like to know if the pulley will perform as if you would have a manual engine. I also walked by the booth a few times at 86 fest and was impressed with the products raceseng has to offer.