Raceseng | Billet Aluminum Engine Pulleys

[Raceseng]

We are working on trying to make a billet aluminum tensioner pulley to be lighter then the factory plastic. Easier said then done when the plastic tensioner pulley is already very light and has a tons of small ribbed gussets!

I'm working on it!

Originally Posted by Entropy

Not sure if I follow. If you mean that the Al pieces won't be any lighter, I agree. The ugly plastic idlers just look out of place next to the fancy Raceseng pulleys.

[Raceseng]

They do not whistle or make any additional noise.

Originally Posted by Cade01

So do these make more noise over the stock ones? I don't mind if they do I'm just curious, with the open spoke design it seems like they would have a bit of a whistle, whine, or hiss to them.

[Raceseng]

WE ARE OFFERING A GROUP BUY FOR ALL REVO ENGINE PULLEYS. SLOTS WILL FILL UP QUICK! CLICK TO SEE THREAD >

They are available in Black and Silver. Red is in production and can be pre-purchased now but will not ship for another 3-4 weeks. Act quick as there are a limited number of slots!

[Raceseng]

WE ARE OFFERING A GROUP BUY FOR ALL REVO ENGINE PULLEYS. SLOTS WILL FILL UP QUICK! CLICK TO SEE THREAD >

They are available in Black and Silver. Red is in production and can be pre-purchased now but will not ship for another 3-4 weeks. Act quick as there are a limited number of slots!

Originally Posted by spgrizz22

What about a group buy!!?

[Raceseng]

Originally Posted by markitect

Any idea on price, or when they will be available?

Originally Posted by TRD_07

Any idea of when these might be available for a GB sale?

Originally Posted by Carlitoz3

Atleast red please? :p

Originally Posted by Zaneman

I am excite. Please offer other colors.

Originally Posted by DAN_BRZ

i likey!!! making me think twice about my perrin pulley purchase now. wonder if i can sell it!!! i think additional colours would be nice, if they were anodized.

Originally Posted by TRD_07

I just wanted to say that after looking through Racesengs cite for any updates on the pulleys I didn't find any. What I did happen to see a super sweet shifter knob that's in the pipeline. Well, the longer the wait the more time save.

Originally Posted by Hawk77FT

Been waiting for these for quite some time!
Hurry up already!

[quote=Hawk77FT;1088874]

Originally Posted by Raceseng

The pulleys are FINALLY back from the anodizer and being engraved! I'm hoping to have the pricing finalized and available for purchase by early next week. We are going to offer a group buy for the different kits. I will post on this thread when the group buy is in the classified section.
/QUOTE]

Sounds good. I suppose you take the final weight of each one of them, right?

Still waiting patiently!!!

WE ARE OFFERING A GROUP BUY FOR ALL REVO ENGINE PULLEYS. SLOTS WILL FILL UP QUICK! CLICK TO SEE THREAD >

They are available in Black and Silver. Red is in production and can be pre-purchased now but will not ship for another 3-4 weeks.

[kask2_6.0]

Installed mine today. Fitment and quality is awesome!

[spgrizz22]

Originally Posted by kask2_6.0

Installed mine today. Fitment and quality is awesome!

Is it much more easier to rev the engine?

[kask2_6.0]

Originally Posted by spgrizz22

Is it much more easier to rev the engine?

Yes. It isn't very noticeable during acceleration but it does become very apparent when rev matching downshifts. Free revs quicker and makes it smoother/easier to match RPMs. You can also feel a considerable difference in smoothness when slowly starting out in 1st (normal driving).

You will however notice a slight whine from 3-4k rpm, but nothing that other LCP's don't experience. Not sure if it's the air moving past the pulley or the belt wearing into the new pulley.. Either way it's nothing to worry about. Overall I am very happy with it. Fit was perfect and installation only takes about 10-15 min. The crank pulley seems to be one of the better mods per dollar (in terms of feel) next to the trans support bushing.

[OICU812]

Today I installed Racesengs full pulley kit. Everything fit perfect and no dramas.
So benefits agains of less rotational mass and oh yes they look great.

Didnt notice any noise at all on mine to be honest and well I'm damned picky about that kind of stuff drive around for half hour after install with radio off etc to really pay attention nothing concerning was heard. So...either I'm going deaf or there's no noise as my car is pretty quiet setup overall.

Took me maybe 40-45 minutes to do install and being carefull etc and I'm no mechanic so pretty simple.

REALLY hoping Raceseng does the covers they sneak peaked on FB those look like a very very nice compliment to the pulleys.

[Anthony]

I liked them on Facebook, but I didn't notice the covers. I'll have to go back and find those later.

[OICU812]

Originally Posted by Anthony

I liked them on Facebook, but I didn't notice the covers. I'll have to go back and find those later.

Hope Jarrett doesent mind but here's the small screen they showed of their covers development on FB. So far looks nice still shows some pulley but means some business to.

[Anthony]

Ah, photobucket is blocked at work too. Still can't see haha.

[lbroskee]

Originally Posted by OICU812

Today I installed Racesengs full pulley kit. Everything fit perfect and no dramas.
So benefits agains of less rotational mass and oh yes they look great.

Didnt notice any noise at all on mine to be honest and well I'm damned picky about that kind of stuff drive around for half hour after install with radio off etc to really pay attention nothing concerning was heard. So...either I'm going deaf or there's no noise as my car is pretty quiet setup overall.

Took me maybe 40-45 minutes to do install and being carefull etc and I'm no mechanic so pretty simple.

REALLY hoping Raceseng does the covers they sneak peaked on FB those look like a very very nice compliment to the pulleys.

looks good. i cant wait till they make the last 3 pulleys for a complete set

[Anthony]

Originally Posted by lbroskee

looks good. i cant wait till they make the last 3 pulleys for a complete set

That'll be quite the accomplishment if they can make them significantly lighter.