SUBARU BRZ FIRE

[KKaWing]

Originally Posted by InvalidJohnny5

I'm sure Visconti will move on to a new platform. Like Focus/Fiesta STs or even the Genesis Coupe world. "When there is no one to follow you have no choice but to set a flame! World's first Visconti Doomed ST!"

I'm not so sure ecutek would be able to get a foothold. With SCT tuners @ ~$400 range and COBB @ ~$500 for the v.3... A locked in $900 tune is not appealing at all. You also have tuners working on the platform for a while and they've got a good following too. As for the GC's SFR and BTRcc both sell tunes that include a new ecu, express posted, in the $850 range...

[@Art_Mighty]

Originally Posted by Sportsguy83

So from your post I gather you have no idea FA20Club sells a FF kit even before Visconti and its for sale in the forum?

I know that FA20Club has a kit and that so far there are only the two at this moment....

[Toma]

Originally Posted by Sportsguy83

So you still believe the issues with the FF kit are 1000% installation problems and zero problems with the supplied hardware? I wonder why an updated kit has been provided....

Oh wait, I had not noticed it was the troll at it again, nevermind!

Was anyone told to use the braided hose BARE without it's end?

And if they were dumb enough to suggest it, and the installer was dumb enough or inexperienced enough to actually do it....

[Verge]

Holy **** i just saw this. that looks like Fresno O.O I drove by herndon everyday

[Sportsguy83]

Originally Posted by Toma

Was anyone told to use the braided hose BARE without it's end?

And if they were dumb enough to suggest it, and the installer was dumb enough or inexperienced enough to actually do it....

Hopefully you get it someday kiddo....

[Sivtec]

Originally Posted by @Art_Mighty

I know that FA20Club has a kit and that so far there are only the two at this moment....

Just had to point this out,

I just read your signature, are you referring to visconti? LOL

"...because some men aren't looking for anything logical, like money. They can't be bought, bullied, reasoned, or negotiated with. Some men just want to watch the world burn"

[Frs300]

Originally Posted by @Art_Mighty

I know that FA20Club has a kit and that so far there are only the two at this moment....

i know he sent out a bunch this week and last week so we should get a bunch of reviews/feedback on them.

[Nightbringer]

[evo4g63]

Originally Posted by Sivtec

Just had to point this out,

I just read your signature, are you referring to visconti? LOL

"...because some men aren't looking for anything logical, like money. They can't be bought, bullied, reasoned, or negotiated with. Some men just want to watch the world burn"

Batman movie quote I believe. None the less it fits rather well here

[Toma]

Originally Posted by Sportsguy83

Hopefully you get it someday.....

Don't worry. I get it just fine. And I know what fuel lines go where and how they are supposed to he assembled. When to use a hose clamp, a compression fiting, a push lock, a crimp.....

I also don't bite off more than I can chew.

So.... I'll be fine. Thanks.

[Sportsguy83]

Originally Posted by Toma

Don't worry. I get it just fine. And I know what fuel lines go where and how they are supposed to he assembled. When to use a hose clamp, a compression fiting, a push lock, a crimp.....

I also don't bite off more than I can chew.

So.... I'll be fine. Thanks.

[Sivtec]

Originally Posted by evo4g63

Batman movie quote I believe. None the less it fits rather well here

Yes, I know but it just works so well here, lol

[@Art_Mighty]

Originally Posted by evo4g63

Batman movie quote I believe. None the less it fits rather well here

[ame="https://www.youtube.com/watch?v=efHCdKb5UWc"]The Dark Knight - Some Men Just Want To Watch The World Burn - YouTube[/ame]

[mikalem]

Originally Posted by Toma

Was anyone told to use the braided hose BARE without it's end?

And if they were dumb enough to suggest it, and the installer was dumb enough or inexperienced enough to actually do it....

What exactly is your goal here...? The lines in the picture were instructed to be mated to a metal line with a flared edge, based on a sponsored diy, the best instructions given. While you are right that id doesnt matter much if the end is terminated, in this case it isn't. In this case id, and outer covering matter very much. The kit would have been fine if 1 hose was different, there likely wouldnt have been the leaks, and the OPs car likely would be in one piece.

Originally Posted by Toma

Don't worry. I get it just fine. And I know what fuel lines go where and how they are supposed to he assembled. When to use a hose clamp, a compression fiting, a push lock, a crimp.....

I also don't bite off more than I can chew.

So.... I'll be fine. Thanks.

Sent from my SGH-M919 using Tapatalk 4