Cusco Twinscrew S/C

[FRSRAVEN]

Originally Posted by diss7

That is assuming the robi is having intake temp issues that an intercooler would solve. From what I've seen, he's running alco inj, so he may not see a 25hp gain from adding an IC.

IIRC, he's just running E85, no meth/water injection of any sort. He's running an upgraded fuel pump, a smaller pulley, and an aggressive tune.

[diss7]

Originally Posted by FRSRAVEN

IIRC, he's just running E85, no meth/water injection of any sort. He's running an upgraded fuel pump, a smaller pulley, and an aggressive tune.

Ahh ok. You might be right. I've been reading a lot of build threads lately, must be confusing his build with sw20's

[nix]

Cusco are JDM distributor, Innovate are USA distributor, Bullet are AU distributor.

[Zach3794]

Originally Posted by diss7

That is assuming the robi is having intake temp issues that an intercooler would solve. From what I've seen, he's running alco inj, so he may not see a 25hp gain from adding an IC.

I was at 86fest and talked to Robi today quite a bit about his car. He is still on stock injectors, but upgraded fuel pump. It was just the DW65c before, but now he has his own special concoction to address some issues he was having with E85 specifically. (Recall fuel filter issue)

On top of that, from what the guys at innovate are saying, upgraded cooling system or not, their intercooler upgrade they will be releasing is extremely efficient, and good for 25-35 hp either way, depending on conditions.

[swift996]

Has anyone contacted Bullet about the IC set-up? From my understanding Innovate will have theirs here soon.