Drop it Like its Hot! *Lets See Your Drop*

[Kwise1]

Megan coils on wife's car
All the way down

[VIXEN]

Originally Posted by Kwise1

Brand/Company: Megan
Type of Suspension: Coils
How low did you go: all the way down around 3"
Where did you purchase your suspension? Ft86 speed factory
Are you satisfied with them? YES


Attachment 45279
Attachment 45280

WHICH MEGANS?

[VIXEN]

Originally Posted by Kwise1

Megan coils on wife's car
All the way down
Attachment 45964

WHICH MEGANS?

[Kwise1]

Ez street

[VIXEN]

Originally Posted by Kwise1

Ez street

How do you like it? How does it ride?

[OjiGeorge]

Suspension: Tarmac II's
Drop: Almost bottom (no rubs yet)

[JordanWho]

My 86 is pretty low. Low enough to break an axle due to its geometry being altered anyway.

It's booked in Monday for the following new parts to be installed;

- Drive Shaft Shop 600hp rated axles

- Racer X Fabrication rear upper control arms. Will be running about 4/5 neg camber.

- Whiteline front camber bolts. One set per wheel.

All parts will allow me to run aggressive camber so I can fit wide and aggressively offset wheels. Having the car stanced is the desired outcome.

For now here are a few random pictures taken from a recent car meet. Will post more photos when I get the car back with new parts installed.

[Kwise1]

Originally Posted by VIXEN

How do you like it? How does it ride?

I haven't had any problems. I understand that they are not meant for the track but I bought them just for the drop and daily driving and they are perfect for this. I've installed 3 sets so far (mine, my wife's and a friends) and everyone likes the way they feel. You can still adjust the stiffness with 15 levels of dampening but there is no camber adjustment if that matters to you.

[RallySport Direct]

@JordanWho Car looks great!

Thanks,
Rick

[WolfsFang]

Originally Posted by JordanWho

My 86 is pretty low. Low enough to break an axle due to its geometry being altered anyway.

Oh god I might be as low or lower then you, now i'm scared I might break a axle.

[JordanWho]

Originally Posted by WolfsFang

Oh god I might be as low or lower then you, now i'm scared I might break a axle.

Chances are you will break one, especially if you drive the car hard here and there.

This is my story and what happened to me post #1. It also links you to the replacement axle I bought READ HERE

Not sure if you have seen this build thread but I run a pretty much an identical setup to this guy. Read post #177 & #178 READ HERE

And this is exactly what happened to my axle in post #1 READ HERE

I'd order one sooner rather than later as theres usually a wait to get the replacement part from either Toyota or The Drive Shaft Shop.

Hope that helps.

[JordanWho]

Originally Posted by RallySport Direct

@JordanWho Car looks great!

Thanks,
Rick

Give it a week and it will look completely different. Will update my build thread with pics!

[wrohdejr]

Model: AirLift front and rear
Drop: 5 inches
Purchased From: Airlift
Satisfied? Yes!!

18x8 Tsw Jerez +35 yes i know i need some spacers!!

This weekend i won the limbo contest at the NW Big Subaru Meet. Cleared 46 inches and just barely touched at 45.

Video of the competition below the picture!




[ame="https://www.youtube.com/watch?feature=player_embedded&v=LFvRSbBpLI4"]BIG Northwest Subaru Meet 2013 - Lowest Subaru Contest - YouTube[/ame]

[JordanWho]

Originally Posted by wrohdejr

Model: AirLift front and rear
Drop: 5 inches
Purchased From: Airlift
Satisfied? Yes!!

18x8 Tsw Jerez +35 yes i know i need some spacers!!

This weekend i won the limbo contest at the NW Big Subaru Meet. Cleared 46 inches and just barely touched at 45.

Video of the competition below the picture!

Needs. More. Poke.