Allentown area performance shops?

[Juanbob]

Can anyone recommend a good shop for installing aftermarket parts/doing performance mods - in the Allentown, PA area? Dealer won't install non Subaru parts and overcharge me, and I don't have the tools or know-how to do it myself. Thanks!

JY

[AZP Installs]

We are about 1 hour or so East of Allentown get in touch and we'll help you out. Well worth the drive. If it's too far you can try Area1320 who is out that way as well.

-Mike Paisan

AZP's First Private Track Event, June 19 at NJMP Thunderbolt $315 including Classroom and Mentor!

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

[enthusiast]

There is A&S Installations off of Airport Rd, they did my tinting, would definitely recommend them. They also specialize in electronics/audio. I also know of Add-Onz which is off of S 12 St. in Allentown. I stopped in once and they seemed knowledgeable, but I haven't actually purchased anything from them.

What are you looking to do, and where in the area are you (if you don't mind me asking)? I'm around the Orefield area.

Hope this helps!

[Juanbob]

I am in Easton...looking to probably put on a Perrin catback system at some point. Maybe new brakes too. Nothing radical. I put on the perrin exhaust tips and they look so nice I thought I should just do the exhaust system.

[hyper4mance]

Motoeast does ecu tuning in easton. Just waiting on headers to come in so I can dyno and tune before and after.

[Raceseng]

Originally Posted by enthusiast

There is A&S Installations off of Airport Rd, they did my tinting, would definitely recommend them. They also specialize in electronics/audio. I also know of Add-Onz which is off of S 12 St. in Allentown. I stopped in once and they seemed knowledgeable, but I haven't actually purchased anything from them.

What are you looking to do, and where in the area are you (if you don't mind me asking)? I'm around the Orefield area.

Hope this helps!

Raceseng is located in Orefield. We are just up the road from the Leather Corner Post! Where are you located?

[Raceseng]

Originally Posted by hyper4mance

Motoeast does ecu tuning in easton. Just waiting on headers to come in so I can dyno and tune before and after.

I can vouch for Mike Mann from Moto East. Very honest and trustworthy guy. Hit him up on Facebook - https://www.facebook.com/motoeast?fref=ts

[The359]

Are there any shops in the Lehigh Valley that can mount tires? I'm trying to put the stock rubber on wider 17x8s and the big name places wont do it.

[enthusiast]

Originally Posted by Raceseng

Raceseng is located in Orefield. We are just up the road from the Leather Corner Post! Where are you located?

I had no idea you were so close...I have to stop by sometime. I looked at your website...looks like some amazing stuff! You can expect a visit soon!

[enthusiast]

Originally Posted by The359

Are there any shops in the Lehigh Valley that can mount tires? I'm trying to put the stock rubber on wider 17x8s and the big name places wont do it.

My family mechanic (GEAR Automotive in Ironton) has that service. We've gone there for years and he's always been fair and great. If it's not too far for you I'd highly recommend him.

[Xero-Limit]

Originally Posted by The359

Are there any shops in the Lehigh Valley that can mount tires? I'm trying to put the stock rubber on wider 17x8s and the big name places wont do it.

Yup, we can do it or send you to someone who can. Usually 120 or so for a set.

[Raceseng]

Stop by, our shop/studio is right up the road from the Leather Corner Post. Look for a large pole building right before Morgenland Church on Weidasville Rd!

Hope to meet you soon!

Originally Posted by enthusiast

I had no idea you were so close...I have to stop by sometime. I looked at your website...looks like some amazing stuff! You can expect a visit soon!

[enthusiast]

Originally Posted by Raceseng

Stop by, our shop/studio is right up the road from the Leather Corner Post. Look for a large pole building right before Morgenland Church on Weidasville Rd!

Hope to meet you soon!

Nice...I may try to stop by today but not sure if I can get out of work early enough. We will see. If not, early next week.

Do you guys just sell your machined parts, or also serve as a vendor for other companies to order through? Also, do you or Moto East have a dyno? 'been looking for one of those in the area.

[Raceseng]

The rest of the week is bad for me, I leave for vacation next week and I'm slammed with work. let's try to connect after next week - email me jarrett (at) raceseng.com

We fully design and manufacture our parts completely in house and will have a network of dealers and installers selling our parts.

Moto East has a dyno and he is a top notch tuner! He did the tune on our car and I'm very pleased!

Originally Posted by enthusiast

Nice...I may try to stop by today but not sure if I can get out of work early enough. We will see. If not, early next week.

Do you guys just sell your machined parts, or also serve as a vendor for other companies to order through? Also, do you or Moto East have a dyno? 'been looking for one of those in the area.