Frs Fog Lights Finally! - Page 51 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

OICU812 · 06-07-2013, 03:16 AM

What's been found to being the cleanest "white" light for the fogs? I need to replace mine to get better front blend, mine currently are "yellowish".

CamryDS · 07-02-2013, 06:11 PM

[quote=zooki;985184]

Quote:

Originally Posted by mezdup

Did anybody do the 65W h9 to h11 bulb mod with their fog lights? If so any issues? /QUOTE]

I have the H11 bulbs in my fog lights, and no problems so far. I have the harness from Nigel, so I can run them with the high and low beams. I also converted my headlights to H11.

try to pick up the solaris yellows or ultra whites -- I have a pair of H9's --> H11's in my headlamps. they are okay.

Hiros86 · 07-05-2013, 01:02 AM

[QUOTE=CanibeatNoel;790083]Swapped my oem fogs to the Crystal Eye fogs.

ok what website did you find these led fog lights on because im having a hard time locating them lol

OICU812 · 07-05-2013, 01:17 AM

[quote=Hiros86;1046269]

Quote:

Originally Posted by CanibeatNoel

Swapped my oem fogs to the Crystal Eye fogs.

ok what website did you find these led fog lights on because im having a hard time locating them lol

+1 I like the clean white. Also do these need a special relay and just use stock plug into them? I'd really like a set of these to my Subaru ones are very yellow "ugly" contrast with my led switchbacks and HIDs...

#944_10_Series_FRS · 07-24-2013, 05:25 PM

I just bought a pair of Subaru fog lights (part #s 84501AJ00A) from ebay including shipping for $42.00. I am not sure if it is against the forum rule to post the link but they arrived and in brand new condition. All you have to do is searching ebay by plugging in that part #s and you will see. Buyer has 100% feedback.

808GIRL · 07-27-2013, 01:33 AM

looks great , my next purchase

ucsmfu · 10-20-2013, 12:23 PM

anyone here installed projector fog lights ?

636 · 12-01-2013, 11:28 PM

Well I got everything, harness, bezels, fogs, but I'm SUPER confused on how to wire up this on/off switch!

Can anyone forward me to a guide with pictures? I've gone through this whole thread with no real luck.

m.box.design · 12-02-2013, 12:10 AM

The two white ends are a male and female connector. You're supposed to feed one through the firewall (I fed the one on the switch through) into the engine bay. The red wire is supposed to tap into the 12v power in the compartment under your steering wheel.

Quote:

Originally Posted by 636

Well I got everything, harness, bezels, fogs, but I'm SUPER confused on how to wire up this on/off switch!

Can anyone forward me to a guide with pictures? I've gone through this whole thread with no real luck.

636 · 12-02-2013, 03:13 AM

So this is correct?

636 · 12-02-2013, 11:33 PM

Got these installed and wired up, wasn't too bad. My first time every messing around with foglights. Never had them before on any car, so I don't know how they are supposed to be cut-off/angled. Any tips? Keep in mind my car is lowered about 4 to 4 1/2 inches.

Here's a lot of pictures.

Cutting into the Ignition wire, and splicing them.

Where my button is sitting until I decide to get a new dash piece.

Frontal Shot. (I have Nokya H11 Yellow Bulbs.)

Fog Cutoff, Fog+LowBeams, Fogs+LowBeams+HighBeams.

assbox · 12-05-2013, 01:36 PM

Fog light install was a success

QT0843 · 12-18-2013, 03:56 PM

Is anyone know which wire should I tap in for the 10 series with push Ignition?

FutureFT86 · 01-13-2014, 09:44 PM

Heads up to all who ordered from nigelJDM. The kit is very nice and he has very fast delivery. However the harness is kid of short. The only way I could reach both fogs is if I fished the harness in front of the radiator.

Where did u guys fish the harness across to reach both fogs? I don't really feel comfortable having the harness exposed to the weather and in front of the rad (just behind the front bumper grill)...

12-18-2013, 03:56 PM	#713
QT0843 Member Join Date: Aug 2013 Drives: 10 series FRS Location: Hayward CA Posts: 116 Thanks: 51 Thanked 63 Times in 39 Posts Mentioned: 6 Post(s)	Is anyone know which wire should I tap in for the 10 series with push Ignition? Last edited by QT0843; 08-28-2015 at 01:42 PM.

01-13-2014, 09:44 PM	#714
FutureFT86 Senior Member Join Date: Aug 2011 Drives: 13 Scion FR-S Location: montreal Posts: 132 Thanks: 76 Thanked 16 Times in 15 Posts Mentioned: 1 Post(s)	Heads up to all who ordered from nigelJDM. The kit is very nice and he has very fast delivery. However the harness is kid of short. The only way I could reach both fogs is if I fished the harness in front of the radiator. Where did u guys fish the harness across to reach both fogs? I don't really feel comfortable having the harness exposed to the weather and in front of the rad (just behind the front bumper grill)... __________________ Check out my build: Instagram @kawallito

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FR-S smoked tail lights and reverse lights	jjdrivesajazz	Cosmetic Modification (Interior/Exterior/Lighting)	43	02-21-2013 08:38 PM
FINALLY - Got my FR-S	SkitterSkotter	Scion FR-S / Toyota 86 GT86 General Forum	28	08-03-2012 05:16 PM
FINALLY GOT IT!	Ayaz2589	NY / NJ / CT / PA	8	07-28-2012 02:52 AM
Finally got it!!	percyng	CANADA	21	06-17-2012 01:50 AM
Fog lights on with parking/running lights possible?	BMWDavid	BRZ First-Gen (2012+) — General Topics	1	06-16-2012 07:29 PM

07-05-2013, 01:02 AM	#703
Hiros86 Member Join Date: Feb 2013 Drives: whiteout FR-S Location: East Bay Posts: 67 Thanks: 2 Thanked 11 Times in 6 Posts Mentioned: 4 Post(s)	[QUOTE=CanibeatNoel;790083]Swapped my oem fogs to the Crystal Eye fogs. ok what website did you find these led fog lights on because im having a hard time locating them lol

07-24-2013, 05:25 PM	#705
#944_10_Series_FRS Senior Member Join Date: Jul 2013 Drives: 2013 10 series FRS #944 Location: Seattle, WA Posts: 1,705 Thanks: 329 Thanked 352 Times in 248 Posts Mentioned: 6 Post(s)	I just bought a pair of Subaru fog lights (part #s 84501AJ00A) from ebay including shipping for $42.00. I am not sure if it is against the forum rule to post the link but they arrived and in brand new condition. All you have to do is searching ebay by plugging in that part #s and you will see. Buyer has 100% feedback.

07-27-2013, 01:33 AM	#706
808GIRL Junior Member Join Date: Mar 2013 Drives: 2013 scion FRS Location: Redmond Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s)	looks great , my next purchase

10-20-2013, 12:23 PM	#707
ucsmfu Senior Member Join Date: Aug 2013 Drives: BRZ Limited Location: vancouver Posts: 518 Thanks: 60 Thanked 107 Times in 69 Posts Mentioned: 4 Post(s)	anyone here installed projector fog lights ?

User Name		Remember Me?
Password